| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <d00456e3-00e1-e373-760c-8292d6e7dd1b@codeaurora.org>
Date: Mon, 3 Aug 2020 13:58:34 +0530
From: Rohit Kumar <rohitkr@...eaurora.org>
To: Rob Herring <robh@...nel.org>
Cc: devicetree@...r.kernel.org, alsa-devel@...a-project.org,
bgoswami@...eaurora.org, linux-arm-msm@...r.kernel.org,
plai@...eaurora.org, tiwai@...e.com, agross@...nel.org,
lgirdwood@...il.com, broonie@...nel.org,
srinivas.kandagatla@...aro.org, bjorn.andersson@...aro.org,
linux-kernel@...r.kernel.org
Subject: Re: [PATCH v4 12/12] dt-bindings: sound: lpass-cpu: Move to yaml
format
Thanks Rob for reviewing
On 7/23/2020 10:46 PM, Rob Herring wrote:
> On Wed, Jul 22, 2020 at 04:01:55PM +0530, Rohit kumar wrote:
>> Update lpass-cpu binding with yaml formats.
>>
>> Signed-off-by: Rohit kumar <rohitkr@...eaurora.org>
>> ---
>> .../devicetree/bindings/sound/qcom,lpass-cpu.txt | 130 ---------------
>> .../devicetree/bindings/sound/qcom,lpass-cpu.yaml | 185 +++++++++++++++++++++
>> 2 files changed, 185 insertions(+), 130 deletions(-)
>> delete mode 100644 Documentation/devicetree/bindings/sound/qcom,lpass-cpu.txt
>> create mode 100644 Documentation/devicetree/bindings/sound/qcom,lpass-cpu.yaml
>>
>> diff --git a/Documentation/devicetree/bindings/sound/qcom,lpass-cpu.txt b/Documentation/devicetree/bindings/sound/qcom,lpass-cpu.txt
>> deleted file mode 100644
>> index c21392e..00000000
>> --- a/Documentation/devicetree/bindings/sound/qcom,lpass-cpu.txt
>> +++ /dev/null
>> @@ -1,130 +0,0 @@
>> -* Qualcomm Technologies LPASS CPU DAI
>> -
>> -This node models the Qualcomm Technologies Low-Power Audio SubSystem (LPASS).
>> -
>> -Required properties:
>> -
>> -- compatible : "qcom,lpass-cpu" or "qcom,apq8016-lpass-cpu" or
>> - "qcom,lpass-cpu-sc7180"
>> -- clocks : Must contain an entry for each entry in clock-names.
>> -- clock-names : A list which must include the following entries:
>> - * "ahbix-clk"
>> - * "mi2s-osr-clk"
>> - * "mi2s-bit-clk"
>> - : required clocks for "qcom,lpass-cpu-apq8016"
>> - * "ahbix-clk"
>> - * "mi2s-bit-clk0"
>> - * "mi2s-bit-clk1"
>> - * "mi2s-bit-clk2"
>> - * "mi2s-bit-clk3"
>> - * "pcnoc-mport-clk"
>> - * "pcnoc-sway-clk"
>> - : required clocks for "qcom,lpass-cpu-sc7180"
>> - * "audio-core"
>> - * "mclk0"
>> - * "mi2s-bit-clk0"
>> - * "mi2s-bit-clk1"
>> - * "pcnoc-sway-clk"
>> - * "pcnoc-mport-clk"
>> -
>> -- interrupts : Must contain an entry for each entry in
>> - interrupt-names.
>> -- interrupt-names : A list which must include the following entries:
>> - * "lpass-irq-lpaif"
>> -- pinctrl-N : One property must exist for each entry in
>> - pinctrl-names. See ../pinctrl/pinctrl-bindings.txt
>> - for details of the property values.
>> -- pinctrl-names : Must contain a "default" entry.
>> -- reg : Must contain an address for each entry in reg-names.
>> -- reg-names : A list which must include the following entries:
>> - * "lpass-lpaif"
>> -- #address-cells : Must be 1
>> -- #size-cells : Must be 0
>> -
>> -
>> -
>> -Optional properties:
>> -
>> -- qcom,adsp : Phandle for the audio DSP node
>> -
>> -By default, the driver uses up to 4 MI2S SD lines, for a total of 8 channels.
>> -The SD lines to use can be configured by adding subnodes for each of the DAIs.
>> -
>> -Required properties for each DAI (represented by a subnode):
>> -- reg : Must be one of the DAI IDs
>> - (usually part of dt-bindings header)
>> -- qcom,playback-sd-lines: List of serial data lines to use for playback
>> - Each SD line should be represented by a number from 0-3.
>> -- qcom,capture-sd-lines : List of serial data lines to use for capture
>> - Each SD line should be represented by a number from 0-3.
>> -
>> -Note that adding a subnode changes the default to "no lines configured",
>> -so both playback and capture lines should be configured when a subnode is added.
>> -
>> -Examples:
>> -1)
>> -
>> -lpass@...00000 {
>> - compatible = "qcom,lpass-cpu";
>> - clocks = <&lcc AHBIX_CLK>, <&lcc MI2S_OSR_CLK>, <&lcc MI2S_BIT_CLK>;
>> - clock-names = "ahbix-clk", "mi2s-osr-clk", "mi2s-bit-clk";
>> - interrupts = <0 85 1>;
>> - interrupt-names = "lpass-irq-lpaif";
>> - pinctrl-names = "default", "idle";
>> - pinctrl-0 = <&mi2s_default>;
>> - pinctrl-1 = <&mi2s_idle>;
>> - reg = <0x28100000 0x10000>;
>> - reg-names = "lpass-lpaif";
>> - qcom,adsp = <&adsp>;
>> -
>> - #address-cells = <1>;
>> - #size-cells = <0>;
>> -
>> - /* Optional to set different MI2S SD lines */
>> - dai@3 {
>> - reg = <MI2S_QUATERNARY>;
>> - qcom,playback-sd-lines = <0 1>;
>> - };
>> -};
>> -
>> -2)
>> -
>> -#include <dt-bindings/sound/sc7180-lpass.h>
>> -
>> -lpass_cpu: lpass {
>> - compatible = "qcom,lpass-cpu-sc7180";
>> -
>> - reg = <0 0x62F00000 0 0x29000>;
>> -
>> - iommus = <&apps_smmu 0x1020 0>;
>> -
>> - power-domains = <&lpass_hm LPASS_CORE_HM_GDSCR>;
>> - clocks = <&gcc GCC_LPASS_CFG_NOC_SWAY_CLK>,
>> - <&lpasscorecc LPASS_AUDIO_CORE_CORE_CLK>,
>> - <&lpasscorecc LPASS_AUDIO_CORE_EXT_MCLK0_CLK>,
>> - <&lpasscorecc LPASS_AUDIO_CORE_SYSNOC_MPORT_CORE_CLK>,
>> - <&lpasscorecc LPASS_AUDIO_CORE_LPAIF_PRI_IBIT_CLK>,
>> - <&lpasscorecc LPASS_AUDIO_CORE_LPAIF_SEC_IBIT_CLK>;
>> - clock-names = "pcnoc-sway-clk", "audio-core",
>> - "mclk0", "pcnoc-mport-clk",
>> - "mi2s-bit-clk0", "mi2s-bit-clk1";
>> - interrupts = <0 160 IRQ_TYPE_LEVEL_HIGH>;
>> - interrupt-names = "lpass-irq-lpaif";
>> -
>> -
>> - #sound-dai-cells = <1>;
>> -
>> - #address-cells = <1>;
>> - #size-cells = <0>;
>> -
>> - mi2s-primary@0 {
>> - reg = <MI2S_PRIMARY>;
>> - qcom,playback-sd-lines = <1>;
>> - qcom,capture-sd-lines = <0>;
>> - };
>> -
>> - mi2s-secondary@1 {
>> - reg = <MI2S_SECONDARY>;
>> - qcom,playback-sd-lines = <0>;
>> - };
>> -};
>> diff --git a/Documentation/devicetree/bindings/sound/qcom,lpass-cpu.yaml b/Documentation/devicetree/bindings/sound/qcom,lpass-cpu.yaml
>> new file mode 100644
>> index 00000000..03c598f
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/sound/qcom,lpass-cpu.yaml
>> @@ -0,0 +1,185 @@
>> +# SPDX-License-Identifier: GPL-2.0-only
> If all the authors are QCom or Linaro please dual license.
Ok
>> +%YAML 1.2
>> +---
>> +$id: http://devicetree.org/schemas/sound/qcom,lpass-cpu.yaml#
>> +$schema: http://devicetree.org/meta-schemas/core.yaml#
>> +
>> +title: Qualcomm LPASS CPU dai driver bindings
>> +
>> +maintainers:
>> + - Srinivas Kandagatla <srinivas.kandagatla@...aro.org>
>> + - Rohit kumar <rohitkr@...eaurora.org>
>> +
>> +description: |
>> + Qualcomm SOC Low-Power Audio SubSystem (LPASS) that consist of MI2S interface
>> + for audio data transfer on external codecs. LPASS cpu driver is a module to
>> + configure Low-Power Audio Interface(LPAIF) core registers across different
>> + IP versions.
>> +
>> +properties:
>> + compatible:
>> + oneOf:
>> + - const: qcom,lpass-cpu
>> + description: For IPQ806x
>> +
>> + - const: qcom,apq8016-lpass-cpu
>> + description: For APQ8016
>> +
>> + - const: qcom,lpass-cpu-sc7180
>> + description: For SC7180
> Use enum rather than oneOf+const
Sure
>> +
>> + reg:
>> + maxItems: 1
>> + description: LPAIF core registers
>> +
>> + clocks:
>> + minItems: 3
>> + maxItems: 6
>> +
>> + clock-names:
>> + minItems: 3
>> + maxItems: 6
>> +
>> + interrupts:
>> + maxItems: 1
>> + description: LPAIF DMA buffer interrupt
>> +
>> + qcom,adsp:
>> + $ref: /schemas/types.yaml#/definitions/phandle
>> + description: Phandle for the audio DSP node
>> +
>> + iommus:
>> + maxItems: 1
>> + description: Phandle to apps_smmu node with sid mask
>> +
>> + power-domains:
>> + maxItems: 1
>> +
>> + '#sound-dai-cells':
>> + const: 1
>> +
>> +patternProperties:
>> + "(^mi2s-[0-9a-f]$|mi2s)":
>> + type: object
>> + description: Required properties for each DAI
>> +
>> + properties:
>> + reg:
>> + maxItems: 1
>> + description: Must be one of the DAI ID
>> +
>> + required:
>> + - reg
>> +
>> +
> Extra blank line.
Ok
>> +required:
>> + - compatible
>> + - reg
>> + - clocks
>> + - clock-names
>> + - interrupts
>> + - '#sound-dai-cells'
> Add:
>
> additionalProperties: false
If I am adding this, I am getting below error:
Documentation/devicetree/bindings/sound/qcom,lpass-cpu.example.dt.yaml:
lpass@...00000: '#address-cells', '#size-cells' do not match any of the
regexes: '(^mi2s-[0-9a-f]$|mi2s)', 'pinctrl-[0-9]+'
I think this is coming because we have not mentioned mi2s-primary@0 in
required fields.
The field name is variable based on the interface to which peripheral is
connected to.
It can be either of primary/secondary/tertiary/quaternary. Can you
please suggest how to
avoid this error?
>> +
>> +allOf:
>> + - if:
>> + properties:
>> + compatible:
>> + contains:
>> + const: qcom,lpass-cpu-sc7180
>> +
>> + then:
>> + required:
>> + - iommus
>> + - power-domains
>> +
>> + - if:
>> + properties:
>> + compatible:
>> + contains:
>> + const: qcom,lpass-cpu
>> +
>> + then:
>> + properties:
>> + clock-names:
>> + items:
>> + - const: ahbix-clk
>> + - const: mi2s-osr-clk
>> + - const: mi2s-bit-clk
>> +
>> + - if:
>> + properties:
>> + compatible:
>> + contains:
>> + const: qcom,apq8016-lpass-cpu
>> +
>> + then:
>> + properties:
>> + clock-names:
>> + items:
>> + - const: ahbix-clk
>> + - const: mi2s-bit-clk0
>> + - const: mi2s-bit-clk1
>> + - const: mi2s-bit-clk2
>> + - const: mi2s-bit-clk3
>> + - const: pcnoc-mport-clk
>> + - const: pcnoc-sway-clk
>> +
>> + - if:
>> + properties:
>> + compatible:
>> + contains:
>> + const: qcom,lpass-cpu-sc7180
> You already have the same condition previously. Combine into 1.
Ok
>> +
>> + then:
>> + properties:
>> + clock-names:
>> + items:
>> + - const: pcnoc-sway-clk
>> + - const: audio-core
>> + - const: mclk0
>> + - const: pcnoc-mport-clk
>> + - const: mi2s-bit-clk0
>> + - const: mi2s-bit-clk1
>> +
>> +examples:
>> + - |
>> + #include <dt-bindings/sound/sc7180-lpass.h>
>> +
>> + soc {
>> + #address-cells = <2>;
>> + #size-cells = <2>;
>> + lpass@...00000 {
>> + compatible = "qcom,lpass-cpu-sc7180";
>> +
>> + reg = <0 0x62f00000 0 0x29000>;
>> +
>> + iommus = <&apps_smmu 0x1020 0>;
>> + power-domains = <&lpass_hm 0>;
>> +
>> + clocks = <&gcc 131>,
>> + <&lpasscorecc 6>,
>> + <&lpasscorecc 7>,
>> + <&lpasscorecc 10>,
>> + <&lpasscorecc 8>,
>> + <&lpasscorecc 9>;
>> +
>> + clock-names = "pcnoc-sway-clk", "audio-core",
>> + "mclk0", "pcnoc-mport-clk",
>> + "mi2s-bit-clk0", "mi2s-bit-clk1";
>> +
>> + interrupts = <0 160 1>;
>> +
>> + #sound-dai-cells = <1>;
>> +
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> + /* Optional to set different MI2S SD lines */
>> + mi2s-primary@0 {
>> + reg = <MI2S_PRIMARY>;
>> + qcom,playback-sd-lines = <1>;
>> + qcom,capture-sd-lines = <0>;
>> + };
>> + };
>> + };
>> +
>> +...
>> --
>> Qualcomm India Private Limited, on behalf of Qualcomm Innovation Center, Inc.,
>> is a member of Code Aurora Forum, a Linux Foundation Collaborative Project.
Thanks,
Rohit
--
Qualcomm INDIA, on behalf of Qualcomm Innovation Center, Inc.is a member
of the Code Aurora Forum, hosted by the Linux Foundation.
Powered by blists - more mailing lists