| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20200803083436.GG3679@piout.net>
Date: Mon, 3 Aug 2020 10:34:36 +0200
From: Alexandre Belloni <alexandre.belloni@...tlin.com>
To: Claudiu Beznea <claudiu.beznea@...rochip.com>
Cc: nicolas.ferre@...rochip.com, ludovic.desroches@...rochip.com,
linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org
Subject: Re: [PATCH 2/3] ARM: at91: pm: add per soc validation of pm modes
On 03/08/2020 10:25:16+0300, Claudiu Beznea wrote:
> Not all SoCs supports all the PM mode. User may end up settings,
> e.g. backup mode, on a non SAMA5D2 device, but the mode to not be valid.
> If backup mode is used on a devices not supporting it there will be no
> way of resuming other than rebooting.
I don't think this actually happens as if backup mode is requested on a
non sama5d2 device, of_find_compatible_node(NULL, NULL,
"atmel,sama5d2-sfrbu") will fail and the PM will default to
AT91_PM_ULP0.
ULP1 will also default to ULP0 if the shdwc is not from sama5d2 or
sam9x60.
I'm guessing the actual issue is introduced with ulp0 fast.
>
> Signed-off-by: Claudiu Beznea <claudiu.beznea@...rochip.com>
> ---
> arch/arm/mach-at91/at91rm9200.c | 10 +++++-
> arch/arm/mach-at91/at91sam9.c | 9 +++++-
> arch/arm/mach-at91/generic.h | 20 ++++++------
> arch/arm/mach-at91/pm.c | 69 +++++++++++++++++++++++++++++++++++++----
> arch/arm/mach-at91/sam9x60.c | 11 ++++++-
> arch/arm/mach-at91/sama5.c | 21 +++++++++++--
> 6 files changed, 119 insertions(+), 21 deletions(-)
>
> diff --git a/arch/arm/mach-at91/at91rm9200.c b/arch/arm/mach-at91/at91rm9200.c
> index 4f8186211619..7318d8e16797 100644
> --- a/arch/arm/mach-at91/at91rm9200.c
> +++ b/arch/arm/mach-at91/at91rm9200.c
> @@ -13,12 +13,20 @@
> #include <asm/mach/arch.h>
>
> #include "generic.h"
> +#include "pm.h"
> +
> +/* AT91RM9200 valid PM modes. */
> +static const int at91rm9200_pm_modes[] = {
> + AT91_PM_STANDBY,
> + AT91_PM_ULP0,
> +};
>
> static void __init at91rm9200_dt_device_init(void)
> {
> of_platform_default_populate(NULL, NULL, NULL);
>
> - at91rm9200_pm_init();
> + at91rm9200_pm_init(at91rm9200_pm_modes,
> + ARRAY_SIZE(at91rm9200_pm_modes));
> }
>
You can avoid the changes in the soc files and leave everything
contained in pm.c as each <soc>_pm_init has a known list of mode that
will very likely never change. Bonus points if you make the arrays
__initdata.
> static const char *const at91rm9200_dt_board_compat[] __initconst = {
> diff --git a/arch/arm/mach-at91/at91sam9.c b/arch/arm/mach-at91/at91sam9.c
> index 7e572189a5eb..683f2c35a116 100644
> --- a/arch/arm/mach-at91/at91sam9.c
> +++ b/arch/arm/mach-at91/at91sam9.c
> @@ -13,12 +13,19 @@
> #include <asm/system_misc.h>
>
> #include "generic.h"
> +#include "pm.h"
> +
> +/* AT91SAM9 valid PM modes. */
> +static const int at91sam9_pm_modes[] = {
> + AT91_PM_STANDBY,
> + AT91_PM_ULP0,
> +};
>
> static void __init at91sam9_init(void)
> {
> of_platform_default_populate(NULL, NULL, NULL);
>
> - at91sam9_pm_init();
> + at91sam9_pm_init(at91sam9_pm_modes, ARRAY_SIZE(at91sam9_pm_modes));
> }
>
> static const char *const at91_dt_board_compat[] __initconst = {
> diff --git a/arch/arm/mach-at91/generic.h b/arch/arm/mach-at91/generic.h
> index 0a4cdcb4985b..610a12e5a71c 100644
> --- a/arch/arm/mach-at91/generic.h
> +++ b/arch/arm/mach-at91/generic.h
> @@ -9,17 +9,17 @@
> #define _AT91_GENERIC_H
>
> #ifdef CONFIG_PM
> -extern void __init at91rm9200_pm_init(void);
> -extern void __init at91sam9_pm_init(void);
> -extern void __init sam9x60_pm_init(void);
> -extern void __init sama5_pm_init(void);
> -extern void __init sama5d2_pm_init(void);
> +extern void __init at91rm9200_pm_init(const int *modes, int len);
> +extern void __init at91sam9_pm_init(const int *modes, int len);
> +extern void __init sam9x60_pm_init(const int *modes, int len);
> +extern void __init sama5_pm_init(const int *modes, int len);
> +extern void __init sama5d2_pm_init(const int *modes, int len);
> #else
> -static inline void __init at91rm9200_pm_init(void) { }
> -static inline void __init at91sam9_pm_init(void) { }
> -static inline void __init sam9x60_pm_init(void) { }
> -static inline void __init sama5_pm_init(void) { }
> -static inline void __init sama5d2_pm_init(void) { }
> +static inline void __init at91rm9200_pm_init(const int *modes, int len) { }
> +static inline void __init at91sam9_pm_init(const int *modes, int len) { }
> +static inline void __init sam9x60_pm_init(const int *modes, int len) { }
> +static inline void __init sama5_pm_init(const int *modes, int len) { }
> +static inline void __init sama5d2_pm_init(const int *modes, int len) { }
> #endif
>
Then this change is not necessary.
> #endif /* _AT91_GENERIC_H */
> diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c
> index 04fdcbd57100..caf87efc7eeb 100644
> --- a/arch/arm/mach-at91/pm.c
> +++ b/arch/arm/mach-at91/pm.c
> @@ -785,6 +785,59 @@ static const struct of_device_id atmel_pmc_ids[] __initconst = {
> { /* sentinel */ },
> };
>
> +static void __init at91_pm_modes_validate(const int *modes, int len)
> +{
> + u8 i, located = 0;
> + int mode;
> +
> +#define STANDBY BIT(0)
> +#define SUSPEND BIT(1)
> +
> + for (i = 0; i < len; i++) {
> + if ((located & STANDBY) && (located & SUSPEND))
> + break;
> +
> + if (modes[i] == soc_pm.data.standby_mode &&
> + !(located & STANDBY)) {
> + located |= STANDBY;
> + continue;
> + }
> +
> + if (modes[i] == soc_pm.data.suspend_mode &&
> + !(located & SUSPEND)) {
> + located |= SUSPEND;
> + continue;
> + }
> + }
> +
> + if (!(located & STANDBY)) {
> + if (soc_pm.data.suspend_mode == AT91_PM_STANDBY)
> + mode = AT91_PM_ULP0;
> + else
> + mode = AT91_PM_STANDBY;
> +
> + pr_warn("AT91: PM: %s mode not supported! Using %s.\n",
> + pm_modes[soc_pm.data.standby_mode].pattern,
> + pm_modes[mode].pattern);
> + soc_pm.data.standby_mode = mode;
> + }
> +
> + if (!(located & SUSPEND)) {
> + if (soc_pm.data.standby_mode == AT91_PM_ULP0)
> + mode = AT91_PM_STANDBY;
> + else
> + mode = AT91_PM_ULP0;
> +
> + pr_warn("AT91: PM: %s mode not supported! Using %s.\n",
> + pm_modes[soc_pm.data.suspend_mode].pattern,
> + pm_modes[mode].pattern);
> + soc_pm.data.suspend_mode = mode;
> + }
> +
> +#undef STANDBY
> +#undef SUSPEND
You should use two booleans instead of a bit array, this would not make
the code longer and will avoid this #def/#undef thing.
> +}
> +
> static void __init at91_pm_init(void (*pm_idle)(void))
> {
> struct device_node *pmc_np;
> @@ -821,11 +874,12 @@ static void __init at91_pm_init(void (*pm_idle)(void))
> }
> }
>
> -void __init at91rm9200_pm_init(void)
> +void __init at91rm9200_pm_init(const int *modes, int len)
> {
> if (!IS_ENABLED(CONFIG_SOC_AT91RM9200))
> return;
>
> + at91_pm_modes_validate(modes, len);
> at91_dt_ramc();
>
> /*
> @@ -836,11 +890,12 @@ void __init at91rm9200_pm_init(void)
> at91_pm_init(at91rm9200_idle);
> }
>
> -void __init sam9x60_pm_init(void)
> +void __init sam9x60_pm_init(const int *modes, int len)
> {
> if (!IS_ENABLED(CONFIG_SOC_SAM9X60))
> return;
>
> + at91_pm_modes_validate(modes, len);
> at91_pm_modes_init();
> at91_dt_ramc();
> at91_pm_init(at91sam9x60_idle);
> @@ -849,31 +904,33 @@ void __init sam9x60_pm_init(void)
> soc_pm.config_pmc_ws = at91_sam9x60_config_pmc_ws;
> }
>
> -void __init at91sam9_pm_init(void)
> +void __init at91sam9_pm_init(const int *modes, int len)
> {
> if (!IS_ENABLED(CONFIG_SOC_AT91SAM9))
> return;
>
> + at91_pm_modes_validate(modes, len);
> at91_dt_ramc();
> at91_pm_init(at91sam9_idle);
> }
>
> -void __init sama5_pm_init(void)
> +void __init sama5_pm_init(const int *modes, int len)
> {
> if (!IS_ENABLED(CONFIG_SOC_SAMA5))
> return;
>
> + at91_pm_modes_validate(modes, len);
> at91_dt_ramc();
> at91_pm_init(NULL);
> }
>
> -void __init sama5d2_pm_init(void)
> +void __init sama5d2_pm_init(const int *modes, int len)
> {
> if (!IS_ENABLED(CONFIG_SOC_SAMA5D2))
> return;
>
> + sama5_pm_init(modes, len);
> at91_pm_modes_init();
> - sama5_pm_init();
>
> soc_pm.ws_ids = sama5d2_ws_ids;
> soc_pm.config_shdwc_ws = at91_sama5d2_config_shdwc_ws;
> diff --git a/arch/arm/mach-at91/sam9x60.c b/arch/arm/mach-at91/sam9x60.c
> index d8c739d25458..d7c869c7b542 100644
> --- a/arch/arm/mach-at91/sam9x60.c
> +++ b/arch/arm/mach-at91/sam9x60.c
> @@ -14,12 +14,21 @@
> #include <asm/system_misc.h>
>
> #include "generic.h"
> +#include "pm.h"
> +
> +/* SAM9X60 valid PM modes. */
> +static const int sam9x60_pm_modes[] = {
> + AT91_PM_STANDBY,
> + AT91_PM_ULP0,
> + AT91_PM_ULP0_FAST,
> + AT91_PM_ULP1,
> +};
>
> static void __init sam9x60_init(void)
> {
> of_platform_default_populate(NULL, NULL, NULL);
>
> - sam9x60_pm_init();
> + sam9x60_pm_init(sam9x60_pm_modes, ARRAY_SIZE(sam9x60_pm_modes));
> }
>
> static const char *const sam9x60_dt_board_compat[] __initconst = {
> diff --git a/arch/arm/mach-at91/sama5.c b/arch/arm/mach-at91/sama5.c
> index 89dab7cf01e8..7eb124612a10 100644
> --- a/arch/arm/mach-at91/sama5.c
> +++ b/arch/arm/mach-at91/sama5.c
> @@ -14,11 +14,19 @@
> #include <asm/system_misc.h>
>
> #include "generic.h"
> +#include "pm.h"
> +
> +/* SAMA5 valid PM modes. */
> +static const int sama5_pm_modes[] = {
> + AT91_PM_STANDBY,
> + AT91_PM_ULP0,
> + AT91_PM_ULP0_FAST,
> +};
>
> static void __init sama5_dt_device_init(void)
> {
> of_platform_default_populate(NULL, NULL, NULL);
> - sama5_pm_init();
> + sama5_pm_init(sama5_pm_modes, ARRAY_SIZE(sama5_pm_modes));
> }
>
> static const char *const sama5_dt_board_compat[] __initconst = {
> @@ -44,10 +52,19 @@ DT_MACHINE_START(sama5_alt_dt, "Atmel SAMA5")
> .l2c_aux_mask = ~0UL,
> MACHINE_END
>
> +/* sama5d2 PM modes. */
> +static const int sama5d2_pm_modes[] = {
> + AT91_PM_STANDBY,
> + AT91_PM_ULP0,
> + AT91_PM_ULP0_FAST,
> + AT91_PM_ULP1,
> + AT91_PM_BACKUP,
> +};
> +
> static void __init sama5d2_init(void)
> {
> of_platform_default_populate(NULL, NULL, NULL);
> - sama5d2_pm_init();
> + sama5d2_pm_init(sama5d2_pm_modes, ARRAY_SIZE(sama5d2_pm_modes));
> }
>
> static const char *const sama5d2_compat[] __initconst = {
> --
> 2.7.4
>
--
Alexandre Belloni, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com
Powered by blists - more mailing lists