lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <20200803020921.64151-1-santiagohssl@gmail.com>
Date:   Sun,  2 Aug 2020 23:09:18 -0300
From:   Santiago Hormazabal <santiagohssl@...il.com>
To:     linux-media@...r.kernel.org, devicetree@...r.kernel.org,
        Rob Herring <robh+dt@...nel.org>,
        Ezequiel Garcia <ezequiel@...labora.com>,
        Hans Verkuil <hverkuil@...all.nl>,
        Mauro Carvalho Chehab <mchehab@...nel.org>,
        linux-kernel@...r.kernel.org
Cc:     Santiago Hormazabal <santiagohssl@...il.com>
Subject: [PATCH 0/3] KT0913 FM/AM driver

media: adds support for kt0913 FM/AM tuner chip

Adds a driver for the KT0913 FM/AM tuner chip from KT Micro. This chip
can be found on many low cost FM/AM radios and DVD/Home Theaters.
The chip provides two ways of usage, a manual mode (requiring only a
few buttons) or complete control via I2C. This driver uses the latter.
It exposes the minimum functionality of this chip, which includes tuning
an AM or FM station given its frequency, reading the signal strength,
setting Stereo (only on FM) or Mono (available on AM/FM), Mute, Volume
and Audio Gain.
I left some TODOs on the code, like supporting the chip's hardware seek
feature, using a RW/RO regmaps rather than a single volatile regmap,
show the FM SNR as a RO control and the FM/AM AFC deviation as another
RO control.
The module I've used comes from SZZSJDZ.com, a now defunct company.
However, it's possible to buy this chip directly from Aliexpress or
similar sites.
I tested this on two systems, the first one being a Raspberry Pi 4 with
the unstable 5.x kernel, but later I moved to a Banana Pi 2 Zero where
I used the (current at this time, 8f2a4a9) master of this repo for testing.
I've also compiled the v4l-compliance from sources (c7f0328) and it passed
all the tests. The output of that is at the end of this note.

Note: This is the second set of patches for the driver, where I (tried to)
address the comments that the reviewers added on the previous set.

v4l2-compliance SHA: c7f03287bbd64c168975e7ff3192e6fd3b507686, 32 bits, 32-bit time_t

Compliance test for kt0913-fm-am device /dev/radio0:

Driver Info:
	Driver name      : kt0913-fm-am
	Card type        : kt0913-fm-am
	Bus info         : I2C:radio0
	Driver version   : 5.8.0
	Capabilities     : 0x80250000
		Tuner
		Radio
		Extended Pix Format
		Device Capabilities
	Device Caps      : 0x00250000
		Tuner
		Radio
		Extended Pix Format

Required ioctls:
	test VIDIOC_QUERYCAP: OK

Allow for multiple opens:
	test second /dev/radio0 open: OK
	test VIDIOC_QUERYCAP: OK
	test VIDIOC_G/S_PRIORITY: OK
	test for unlimited opens: OK

	test invalid ioctls: OK
Debug ioctls:
	test VIDIOC_DBG_G/S_REGISTER: OK
	test VIDIOC_LOG_STATUS: OK

Input ioctls:
	test VIDIOC_G/S_TUNER/ENUM_FREQ_BANDS: OK
	test VIDIOC_G/S_FREQUENCY: OK
	test VIDIOC_S_HW_FREQ_SEEK: OK (Not Supported)
	test VIDIOC_ENUMAUDIO: OK (Not Supported)
	test VIDIOC_G/S/ENUMINPUT: OK (Not Supported)
	test VIDIOC_G/S_AUDIO: OK (Not Supported)
	Inputs: 0 Audio Inputs: 0 Tuners: 1

Output ioctls:
	test VIDIOC_G/S_MODULATOR: OK (Not Supported)
	test VIDIOC_G/S_FREQUENCY: OK
	test VIDIOC_ENUMAUDOUT: OK (Not Supported)
	test VIDIOC_G/S/ENUMOUTPUT: OK (Not Supported)
	test VIDIOC_G/S_AUDOUT: OK (Not Supported)
	Outputs: 0 Audio Outputs: 0 Modulators: 0

Input/Output configuration ioctls:
	test VIDIOC_ENUM/G/S/QUERY_STD: OK (Not Supported)
	test VIDIOC_ENUM/G/S/QUERY_DV_TIMINGS: OK (Not Supported)
	test VIDIOC_DV_TIMINGS_CAP: OK (Not Supported)
	test VIDIOC_G/S_EDID: OK (Not Supported)

Control ioctls:
	test VIDIOC_QUERY_EXT_CTRL/QUERYMENU: OK
	test VIDIOC_QUERYCTRL: OK
	test VIDIOC_G/S_CTRL: OK
	test VIDIOC_G/S/TRY_EXT_CTRLS: OK
	test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: OK
	test VIDIOC_G/S_JPEGCOMP: OK (Not Supported)
	Standard Controls: 8 Private Controls: 0

Format ioctls:
	test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK (Not Supported)
	test VIDIOC_G/S_PARM: OK (Not Supported)
	test VIDIOC_G_FBUF: OK (Not Supported)
	test VIDIOC_G_FMT: OK (Not Supported)
	test VIDIOC_TRY_FMT: OK (Not Supported)
	test VIDIOC_S_FMT: OK (Not Supported)
	test VIDIOC_G_SLICED_VBI_CAP: OK (Not Supported)
	test Cropping: OK (Not Supported)
	test Composing: OK (Not Supported)
	test Scaling: OK (Not Supported)

Codec ioctls:
	test VIDIOC_(TRY_)ENCODER_CMD: OK (Not Supported)
	test VIDIOC_G_ENC_INDEX: OK (Not Supported)
	test VIDIOC_(TRY_)DECODER_CMD: OK (Not Supported)

Buffer ioctls:
	test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: OK (Not Supported)
	test VIDIOC_EXPBUF: OK (Not Supported)
	test Requests: OK (Not Supported)

Total for kt0913-fm-am device /dev/radio0: 45, Succeeded: 45, Failed: 0, Warnings: 0

Santiago Hormazabal (3):
  dt-bindings: vendor-prefixes: Add KT Micro
  media: kt0913: device tree binding
  media: Add support for the AM/FM radio chip KT0913 from KT Micro.

 .../bindings/media/i2c/ktm,kt0913.yaml        |   56 +
 .../devicetree/bindings/vendor-prefixes.yaml  |    2 +
 drivers/media/radio/Kconfig                   |   10 +
 drivers/media/radio/Makefile                  |    1 +
 drivers/media/radio/radio-kt0913.c            | 1196 +++++++++++++++++
 5 files changed, 1265 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/media/i2c/ktm,kt0913.yaml
 create mode 100644 drivers/media/radio/radio-kt0913.c

-- 
2.24.1

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ