[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <10100d9c36cac880b846e454aa4b4df6de96ed41.camel@collabora.com>
Date: Mon, 03 Aug 2020 09:17:30 -0300
From: Ezequiel Garcia <ezequiel@...labora.com>
To: Santiago Hormazabal <santiagohssl@...il.com>,
linux-media@...r.kernel.org, devicetree@...r.kernel.org,
Rob Herring <robh+dt@...nel.org>,
Hans Verkuil <hverkuil@...all.nl>,
Mauro Carvalho Chehab <mchehab@...nel.org>,
linux-kernel@...r.kernel.org
Subject: Re: [PATCH 0/3] KT0913 FM/AM driver
Hello Santiago,
Nice work and welcome to the kernel community.
On Sun, 2020-08-02 at 23:09 -0300, Santiago Hormazabal wrote:
> media: adds support for kt0913 FM/AM tuner chip
>
I don't think this line above should be there.
Also, this seems to be v2. You are missing a "PATCH v2" prefix
on the patches subject, and a v2 changelog on the cover letter.
Some examples for you to look at:
https://patchwork.linuxtv.org/project/linux-media/cover/BN6PR04MB06603B2CD7F2C56B322AF882A3710@BN6PR04MB0660.namprd04.prod.outlook.com/
https://patchwork.linuxtv.org/project/linux-media/cover/20200717145324.292820-1-jacopo+renesas@jmondi.org/
The vN+1 subject makes it easier for reviewers to keep
track of submissions, and the changelog makes it easier
to track the changes.
Thanks!
Ezequiel
> Adds a driver for the KT0913 FM/AM tuner chip from KT Micro. This chip
> can be found on many low cost FM/AM radios and DVD/Home Theaters.
> The chip provides two ways of usage, a manual mode (requiring only a
> few buttons) or complete control via I2C. This driver uses the latter.
> It exposes the minimum functionality of this chip, which includes tuning
> an AM or FM station given its frequency, reading the signal strength,
> setting Stereo (only on FM) or Mono (available on AM/FM), Mute, Volume
> and Audio Gain.
> I left some TODOs on the code, like supporting the chip's hardware seek
> feature, using a RW/RO regmaps rather than a single volatile regmap,
> show the FM SNR as a RO control and the FM/AM AFC deviation as another
> RO control.
> The module I've used comes from SZZSJDZ.com, a now defunct company.
> However, it's possible to buy this chip directly from Aliexpress or
> similar sites.
> I tested this on two systems, the first one being a Raspberry Pi 4 with
> the unstable 5.x kernel, but later I moved to a Banana Pi 2 Zero where
> I used the (current at this time, 8f2a4a9) master of this repo for testing.
> I've also compiled the v4l-compliance from sources (c7f0328) and it passed
> all the tests. The output of that is at the end of this note.
>
> Note: This is the second set of patches for the driver, where I (tried to)
> address the comments that the reviewers added on the previous set.
>
> v4l2-compliance SHA: c7f03287bbd64c168975e7ff3192e6fd3b507686, 32 bits, 32-bit time_t
>
> Compliance test for kt0913-fm-am device /dev/radio0:
>
> Driver Info:
> Driver name : kt0913-fm-am
> Card type : kt0913-fm-am
> Bus info : I2C:radio0
> Driver version : 5.8.0
> Capabilities : 0x80250000
> Tuner
> Radio
> Extended Pix Format
> Device Capabilities
> Device Caps : 0x00250000
> Tuner
> Radio
> Extended Pix Format
>
> Required ioctls:
> test VIDIOC_QUERYCAP: OK
>
> Allow for multiple opens:
> test second /dev/radio0 open: OK
> test VIDIOC_QUERYCAP: OK
> test VIDIOC_G/S_PRIORITY: OK
> test for unlimited opens: OK
>
> test invalid ioctls: OK
> Debug ioctls:
> test VIDIOC_DBG_G/S_REGISTER: OK
> test VIDIOC_LOG_STATUS: OK
>
> Input ioctls:
> test VIDIOC_G/S_TUNER/ENUM_FREQ_BANDS: OK
> test VIDIOC_G/S_FREQUENCY: OK
> test VIDIOC_S_HW_FREQ_SEEK: OK (Not Supported)
> test VIDIOC_ENUMAUDIO: OK (Not Supported)
> test VIDIOC_G/S/ENUMINPUT: OK (Not Supported)
> test VIDIOC_G/S_AUDIO: OK (Not Supported)
> Inputs: 0 Audio Inputs: 0 Tuners: 1
>
> Output ioctls:
> test VIDIOC_G/S_MODULATOR: OK (Not Supported)
> test VIDIOC_G/S_FREQUENCY: OK
> test VIDIOC_ENUMAUDOUT: OK (Not Supported)
> test VIDIOC_G/S/ENUMOUTPUT: OK (Not Supported)
> test VIDIOC_G/S_AUDOUT: OK (Not Supported)
> Outputs: 0 Audio Outputs: 0 Modulators: 0
>
> Input/Output configuration ioctls:
> test VIDIOC_ENUM/G/S/QUERY_STD: OK (Not Supported)
> test VIDIOC_ENUM/G/S/QUERY_DV_TIMINGS: OK (Not Supported)
> test VIDIOC_DV_TIMINGS_CAP: OK (Not Supported)
> test VIDIOC_G/S_EDID: OK (Not Supported)
>
> Control ioctls:
> test VIDIOC_QUERY_EXT_CTRL/QUERYMENU: OK
> test VIDIOC_QUERYCTRL: OK
> test VIDIOC_G/S_CTRL: OK
> test VIDIOC_G/S/TRY_EXT_CTRLS: OK
> test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: OK
> test VIDIOC_G/S_JPEGCOMP: OK (Not Supported)
> Standard Controls: 8 Private Controls: 0
>
> Format ioctls:
> test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK (Not Supported)
> test VIDIOC_G/S_PARM: OK (Not Supported)
> test VIDIOC_G_FBUF: OK (Not Supported)
> test VIDIOC_G_FMT: OK (Not Supported)
> test VIDIOC_TRY_FMT: OK (Not Supported)
> test VIDIOC_S_FMT: OK (Not Supported)
> test VIDIOC_G_SLICED_VBI_CAP: OK (Not Supported)
> test Cropping: OK (Not Supported)
> test Composing: OK (Not Supported)
> test Scaling: OK (Not Supported)
>
> Codec ioctls:
> test VIDIOC_(TRY_)ENCODER_CMD: OK (Not Supported)
> test VIDIOC_G_ENC_INDEX: OK (Not Supported)
> test VIDIOC_(TRY_)DECODER_CMD: OK (Not Supported)
>
> Buffer ioctls:
> test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: OK (Not Supported)
> test VIDIOC_EXPBUF: OK (Not Supported)
> test Requests: OK (Not Supported)
>
> Total for kt0913-fm-am device /dev/radio0: 45, Succeeded: 45, Failed: 0, Warnings: 0
>
> Santiago Hormazabal (3):
> dt-bindings: vendor-prefixes: Add KT Micro
> media: kt0913: device tree binding
> media: Add support for the AM/FM radio chip KT0913 from KT Micro.
>
> .../bindings/media/i2c/ktm,kt0913.yaml | 56 +
> .../devicetree/bindings/vendor-prefixes.yaml | 2 +
> drivers/media/radio/Kconfig | 10 +
> drivers/media/radio/Makefile | 1 +
> drivers/media/radio/radio-kt0913.c | 1196 +++++++++++++++++
> 5 files changed, 1265 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/media/i2c/ktm,kt0913.yaml
> create mode 100644 drivers/media/radio/radio-kt0913.c
>
Powered by blists - more mailing lists