[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <s5hpn86213w.wl-tiwai@suse.de>
Date: Tue, 04 Aug 2020 11:48:19 +0200
From: Takashi Iwai <tiwai@...e.de>
To: Kai-Heng Feng <kai.heng.feng@...onical.com>
Cc: tiwai@...e.com, Jaroslav Kysela <perex@...ex.cz>,
Kai Vehmanen <kai.vehmanen@...ux.intel.com>,
Nikhil Mahale <nmahale@...dia.com>,
Pierre-Louis Bossart <pierre-louis.bossart@...ux.intel.com>,
Aaron Plattner <aplattner@...dia.com>,
"moderated list:SOUND" <alsa-devel@...a-project.org>,
open list <linux-kernel@...r.kernel.org>
Subject: Re: [PATCH] ALSA: hda/hdmi: Add pins with jack detection support
On Tue, 04 Aug 2020 11:31:59 +0200,
Kai-Heng Feng wrote:
>
>
>
> > On Aug 4, 2020, at 17:04, Takashi Iwai <tiwai@...e.de> wrote:
> >
> > On Tue, 04 Aug 2020 09:29:25 +0200,
> > Kai-Heng Feng wrote:
> >>
> >> HDMI on some platforms doesn't enable audio support because its Port
> >> Connectivity [31:30] is set to AC_JACK_PORT_NONE:
> >> Node 0x05 [Pin Complex] wcaps 0x40778d: 8-Channels Digital Amp-Out CP
> >> Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
> >> Amp-Out vals: [0x00 0x00]
> >> Pincap 0x0b000094: OUT Detect HBR HDMI DP
> >> Pin Default 0x58560010: [N/A] Digital Out at Int HDMI
> >> Conn = Digital, Color = Unknown
> >> DefAssociation = 0x1, Sequence = 0x0
> >> Pin-ctls: 0x40: OUT
> >> Unsolicited: tag=00, enabled=0
> >> Power states: D0 D3 EPSS
> >> Power: setting=D0, actual=D0
> >> Devices: 0
> >> Connection: 3
> >> 0x02 0x03* 0x04
> >>
> >> Those pins were filtered out by commit 116dcde63806 ("ALSA: HDA: Remove
> >> unconnected PCM devices for Intel HDMI"). However, jacks that support
> >> detection won't have the issues the commit addresses.
> >>
> >> So still add the pin if it supports jack detection.
> >>
> >> Signed-off-by: Kai-Heng Feng <kai.heng.feng@...onical.com>
> >
> > Which platform did show the problem?
>
> An HP desktop.
Well, what I meant was about which codec. And now I see it in the
below.
> > I'm reluctant to apply this change as it would potentially break the
> > existing system. If we must to apply, maybe it's safer to apply it
> > conditionally to the limited devices.
>
> Hmm, I find it's a bit hard to match a specific device, because the ID seems to be rather generic:
> Codec: Intel Kabylake HDMI
> Address: 2
> AFG Function Id: 0x1 (unsol 0)
> Vendor Id: 0x8086280b
> Subsystem Id: 0x80860101
> Revision Id: 0x100000
>
> Should we use DMI string instead?
So it's a Kabylake, and I presume that it's rather an old machine.
Is this for docking station or anything else?
Basically the pin capability is rather fixed by the chip design while
the pin configuration is set by BIOS. And we follow the BIOS setup
for determining which pins are actually alive. That said, the bug is
a BIOS bug.
Note that PCI SSID bound with this codec might have a different
number, so we might be still able to use the standard quirk table to
pick up.
thanks,
Takashi
> >
> > thanks,
> >
> > Takashi
> >
> >> ---
> >> sound/pci/hda/patch_hdmi.c | 3 ++-
> >> 1 file changed, 2 insertions(+), 1 deletion(-)
> >>
> >> diff --git a/sound/pci/hda/patch_hdmi.c b/sound/pci/hda/patch_hdmi.c
> >> index cd46247988e4..db3a5148bd40 100644
> >> --- a/sound/pci/hda/patch_hdmi.c
> >> +++ b/sound/pci/hda/patch_hdmi.c
> >> @@ -1701,7 +1701,8 @@ static int hdmi_add_pin(struct hda_codec *codec, hda_nid_t pin_nid)
> >> * all device entries on the same pin
> >> */
> >> config = snd_hda_codec_get_pincfg(codec, pin_nid);
> >> - if (get_defcfg_connect(config) == AC_JACK_PORT_NONE)
> >> + if ((get_defcfg_connect(config) == AC_JACK_PORT_NONE) &&
> >> + !(caps & AC_PINCAP_PRES_DETECT))
> >> return 0;
> >>
> >> /*
> >> --
> >> 2.17.1
>
Powered by blists - more mailing lists