| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1596553308-13190-1-git-send-email-Anson.Huang@nxp.com>
Date: Tue, 4 Aug 2020 23:01:48 +0800
From: Anson Huang <Anson.Huang@....com>
To: linus.walleij@...aro.org, bgolaszewski@...libre.com,
robh+dt@...nel.org, stefan@...er.ch, linux-gpio@...r.kernel.org,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org
Cc: Linux-imx@....com
Subject: [PATCH] dt-bindings: gpio: Convert vf610 to json-schema
Convert the vf610 gpio binding to DT schema format using json-schema.
Signed-off-by: Anson Huang <Anson.Huang@....com>
---
.../devicetree/bindings/gpio/gpio-vf610.txt | 63 -----------------
.../devicetree/bindings/gpio/gpio-vf610.yaml | 79 ++++++++++++++++++++++
2 files changed, 79 insertions(+), 63 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/gpio/gpio-vf610.txt
create mode 100644 Documentation/devicetree/bindings/gpio/gpio-vf610.yaml
diff --git a/Documentation/devicetree/bindings/gpio/gpio-vf610.txt b/Documentation/devicetree/bindings/gpio/gpio-vf610.txt
deleted file mode 100644
index ae254aa..0000000
--- a/Documentation/devicetree/bindings/gpio/gpio-vf610.txt
+++ /dev/null
@@ -1,63 +0,0 @@
-* Freescale VF610 PORT/GPIO module
-
-The Freescale PORT/GPIO modules are two adjacent modules providing GPIO
-functionality. Each pair serves 32 GPIOs. The VF610 has 5 instances of
-each, and each PORT module has its own interrupt.
-
-Required properties for GPIO node:
-- compatible : Should be "fsl,<soc>-gpio", below is supported list:
- "fsl,vf610-gpio"
- "fsl,imx7ulp-gpio"
-- reg : The first reg tuple represents the PORT module, the second tuple
- the GPIO module.
-- interrupts : Should be the port interrupt shared by all 32 pins.
-- gpio-controller : Marks the device node as a gpio controller.
-- #gpio-cells : Should be two. The first cell is the pin number and
- the second cell is used to specify the gpio polarity:
- 0 = active high
- 1 = active low
-- interrupt-controller: Marks the device node as an interrupt controller.
-- #interrupt-cells : Should be 2. The first cell is the GPIO number.
- The second cell bits[3:0] is used to specify trigger type and level flags:
- 1 = low-to-high edge triggered.
- 2 = high-to-low edge triggered.
- 4 = active high level-sensitive.
- 8 = active low level-sensitive.
-
-Optional properties:
--clocks: Must contain an entry for each entry in clock-names.
- See common clock-bindings.txt for details.
--clock-names: A list of clock names. For imx7ulp, it must contain
- "gpio", "port".
-
-Note: Each GPIO port should have an alias correctly numbered in "aliases"
-node.
-
-Examples:
-
-aliases {
- gpio0 = &gpio1;
- gpio1 = &gpio2;
-};
-
-gpio1: gpio@...49000 {
- compatible = "fsl,vf610-gpio";
- reg = <0x40049000 0x1000 0x400ff000 0x40>;
- interrupts = <0 107 IRQ_TYPE_LEVEL_HIGH>;
- gpio-controller;
- #gpio-cells = <2>;
- interrupt-controller;
- #interrupt-cells = <2>;
- gpio-ranges = <&iomuxc 0 0 32>;
-};
-
-gpio2: gpio@...4a000 {
- compatible = "fsl,vf610-gpio";
- reg = <0x4004a000 0x1000 0x400ff040 0x40>;
- interrupts = <0 108 IRQ_TYPE_LEVEL_HIGH>;
- gpio-controller;
- #gpio-cells = <2>;
- interrupt-controller;
- #interrupt-cells = <2>;
- gpio-ranges = <&iomuxc 0 32 32>;
-};
diff --git a/Documentation/devicetree/bindings/gpio/gpio-vf610.yaml b/Documentation/devicetree/bindings/gpio/gpio-vf610.yaml
new file mode 100644
index 0000000..315ffde
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/gpio-vf610.yaml
@@ -0,0 +1,79 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/gpio-vf610.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale VF610 PORT/GPIO module
+
+maintainers:
+ - Stefan Agner <stefan@...er.ch>
+
+description: |
+ The Freescale PORT/GPIO modules are two adjacent modules providing GPIO
+ functionality. Each pair serves 32 GPIOs. The VF610 has 5 instances of
+ each, and each PORT module has its own interrupt.
+
+ Note: Each GPIO port should have an alias correctly numbered in "aliases"
+ node.
+
+properties:
+ compatible:
+ enum:
+ - fsl,vf610-gpio
+ - fsl,imx7ulp-gpio
+
+ reg:
+ description: The first reg tuple represents the PORT module, the second tuple
+ represents the GPIO module.
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ interrupt-controller: true
+
+ "#interrupt-cells":
+ const: 2
+
+ "#gpio-cells":
+ const: 2
+
+ gpio-controller: true
+
+ clocks:
+ items:
+ - description: SoC GPIO clock
+ - description: SoC PORT clock
+
+ clock-names:
+ items:
+ - const: gpio
+ - const: port
+
+ gpio-ranges:
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - interrupt-controller
+ - "#interrupt-cells"
+ - "#gpio-cells"
+ - gpio-controller
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+ gpio1: gpio@...49000 {
+ compatible = "fsl,vf610-gpio";
+ reg = <0x40049000 0x1000 0x400ff000 0x40>;
+ interrupts = <0 107 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ gpio-ranges = <&iomuxc 0 0 32>;
+ };
--
2.7.4
Powered by blists - more mailing lists