linux-kernel - Re: [PATCH v4 1/6] dt-bindings: mediatek: add mt7623 display-nodes

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Date:   Tue, 4 Aug 2020 11:22:27 -0600
From:   Rob Herring <robh+dt@...nel.org>
To:     Frank Wunderlich <frank-w@...lic-files.de>
Cc:     Frank Wunderlich <linux@...web.de>,
        "moderated list:ARM/Mediatek SoC support" 
        <linux-mediatek@...ts.infradead.org>,
        Chun-Kuang Hu <chunkuang.hu@...nel.org>,
        Philipp Zabel <p.zabel@...gutronix.de>,
        David Airlie <airlied@...ux.ie>,
        Daniel Vetter <daniel@...ll.ch>,
        Matthias Brugger <matthias.bgg@...il.com>,
        dri-devel <dri-devel@...ts.freedesktop.org>,
        "moderated list:ARM/FREESCALE IMX / MXC ARM ARCHITECTURE" 
        <linux-arm-kernel@...ts.infradead.org>,
        "linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
        devicetree@...r.kernel.org
Subject: Re: [PATCH v4 1/6] dt-bindings: mediatek: add mt7623 display-nodes

On Tue, Aug 4, 2020 at 11:19 AM Frank Wunderlich
<frank-w@...lic-files.de> wrote:
>
> CC Rob Herring and devicetree-list

Resend or it is not in my patchwork queue.

But this is simple enough:

Acked-by: Rob Herring <robh@...nel.org>

>
> > Gesendet: Dienstag, 04. August 2020 um 18:55 Uhr
> > Von: "Frank Wunderlich" <linux@...web.de>
> > An: linux-mediatek@...ts.infradead.org
> > Cc: "Frank Wunderlich" <frank-w@...lic-files.de>, "Chun-Kuang Hu" <chunkuang.hu@...nel.org>, "Philipp Zabel" <p.zabel@...gutronix.de>, "David Airlie" <airlied@...ux.ie>, "Daniel Vetter" <daniel@...ll.ch>, "Matthias Brugger" <matthias.bgg@...il.com>, dri-devel@...ts.freedesktop.org, linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org
> > Betreff: [PATCH v4 1/6] dt-bindings: mediatek: add mt7623 display-nodes
> >
> > From: Frank Wunderlich <frank-w@...lic-files.de>
> >
> > mt7623 uses mt2701/mt8173 for drm, but have own compatibles
> >
> > Signed-off-by: Frank Wunderlich <frank-w@...lic-files.de>
> > ---
> >  .../devicetree/bindings/display/mediatek/mediatek,disp.txt    | 2 +-
> >  .../devicetree/bindings/display/mediatek/mediatek,dpi.txt     | 2 +-
> >  .../devicetree/bindings/display/mediatek/mediatek,dsi.txt     | 4 ++--
> >  .../devicetree/bindings/display/mediatek/mediatek,hdmi.txt    | 4 ++++
> >  4 files changed, 8 insertions(+), 4 deletions(-)
> >
> > diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,disp.txt b/Documentation/devicetree/bindings/display/mediatek/mediatek,disp.txt
> > index b91e709db7a4..121220745d46 100644
> > --- a/Documentation/devicetree/bindings/display/mediatek/mediatek,disp.txt
> > +++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,disp.txt
> > @@ -43,7 +43,7 @@ Required properties (all function blocks):
> >       "mediatek,<chip>-dpi"                   - DPI controller, see mediatek,dpi.txt
> >       "mediatek,<chip>-disp-mutex"            - display mutex
> >       "mediatek,<chip>-disp-od"               - overdrive
> > -  the supported chips are mt2701, mt2712 and mt8173.
> > +  the supported chips are mt2701, mt7623, mt2712 and mt8173.
> >  - reg: Physical base address and length of the function block register space
> >  - interrupts: The interrupt signal from the function block (required, except for
> >    merge and split function blocks).
> > diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,dpi.txt b/Documentation/devicetree/bindings/display/mediatek/mediatek,dpi.txt
> > index 77def4456706..dc1ebd13cc88 100644
> > --- a/Documentation/devicetree/bindings/display/mediatek/mediatek,dpi.txt
> > +++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,dpi.txt
> > @@ -7,7 +7,7 @@ output bus.
> >
> >  Required properties:
> >  - compatible: "mediatek,<chip>-dpi"
> > -  the supported chips are mt2701 , mt8173 and mt8183.
> > +  the supported chips are mt2701, mt7623, mt8173 and mt8183.
> >  - reg: Physical base address and length of the controller's registers
> >  - interrupts: The interrupt signal from the function block.
> >  - clocks: device clocks
> > diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.txt b/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.txt
> > index 8e4729de8c85..f06f24d405a5 100644
> > --- a/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.txt
> > +++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.txt
> > @@ -7,7 +7,7 @@ channel output.
> >
> >  Required properties:
> >  - compatible: "mediatek,<chip>-dsi"
> > -  the supported chips are mt2701, mt8173 and mt8183.
> > +- the supported chips are mt2701, mt7623, mt8173 and mt8183.
> >  - reg: Physical base address and length of the controller's registers
> >  - interrupts: The interrupt signal from the function block.
> >  - clocks: device clocks
> > @@ -26,7 +26,7 @@ The MIPI TX configuration module controls the MIPI D-PHY.
> >
> >  Required properties:
> >  - compatible: "mediatek,<chip>-mipi-tx"
> > -  the supported chips are mt2701, mt8173 and mt8183.
> > +- the supported chips are mt2701, 7623, mt8173 and mt8183.
> >  - reg: Physical base address and length of the controller's registers
> >  - clocks: PLL reference clock
> >  - clock-output-names: name of the output clock line to the DSI encoder
> > diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,hdmi.txt b/Documentation/devicetree/bindings/display/mediatek/mediatek,hdmi.txt
> > index 7b124242b0c5..6b1c586403e4 100644
> > --- a/Documentation/devicetree/bindings/display/mediatek/mediatek,hdmi.txt
> > +++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,hdmi.txt
> > @@ -6,6 +6,7 @@ its parallel input.
> >
> >  Required properties:
> >  - compatible: Should be "mediatek,<chip>-hdmi".
> > +- the supported chips are mt2701, mt7623 and mt8173
> >  - reg: Physical base address and length of the controller's registers
> >  - interrupts: The interrupt signal from the function block.
> >  - clocks: device clocks
> > @@ -32,6 +33,7 @@ The HDMI CEC controller handles hotplug detection and CEC communication.
> >
> >  Required properties:
> >  - compatible: Should be "mediatek,<chip>-cec"
> > +- the supported chips are mt7623 and mt8173
> >  - reg: Physical base address and length of the controller's registers
> >  - interrupts: The interrupt signal from the function block.
> >  - clocks: device clock
> > @@ -44,6 +46,7 @@ The Mediatek's I2C controller is used to interface with I2C devices.
> >
> >  Required properties:
> >  - compatible: Should be "mediatek,<chip>-hdmi-ddc"
> > +- the supported chips are mt7623 and mt8173
> >  - reg: Physical base address and length of the controller's registers
> >  - clocks: device clock
> >  - clock-names: Should be "ddc-i2c".
> > @@ -56,6 +59,7 @@ output and drives the HDMI pads.
> >
> >  Required properties:
> >  - compatible: "mediatek,<chip>-hdmi-phy"
> > +- the supported chips are mt2701, mt7623 and mt8173
> >  - reg: Physical base address and length of the module's registers
> >  - clocks: PLL reference clock
> >  - clock-names: must contain "pll_ref"
> > --
> > 2.25.1
> >
> >