Message-ID: <20200805050105.GA5442@nps-server-21.mtl.labs.mlnx>
Date:   Wed, 5 Aug 2020 08:01:06 +0300
From:   Eli Cohen <eli@...lanox.com>
To:     "Michael S. Tsirkin" <mst@...hat.com>
Cc:     jasowang@...hat.com, virtualization@...ts.linux-foundation.org,
        linux-kernel@...r.kernel.org, shahafs@...lanox.com,
        saeedm@...lanox.com, parav@...lanox.com
Subject: Re: [PATCH V4 linux-next 00/12] VDPA support for Mellanox ConnectX
 devices

On Tue, Aug 04, 2020 at 05:29:09PM -0400, Michael S. Tsirkin wrote:
> On Tue, Aug 04, 2020 at 07:20:36PM +0300, Eli Cohen wrote:
> > Hi Michael,
> > please note that this series depends on mlx5 core device driver patches
> > in mlx5-next branch in
> > git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux.git.
> 
> Thanks! OK so what's the plan for merging this?
> Do patches at least build well enough that I can push them
> upstream? Or do they have to go on top of the mellanox tree?
> 

The patches are built on your linux-next branch which I updated
yesterday.

I am based on this commit:
776b7b25f10b (origin/linux-next) vhost: add an RPMsg API

On top of that I merged
git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux.git

and after that I have Jason's patches (five patches), than one patch
from Max and then my patches (seven).

It builds fine on x84_64.
I fixed some conflicts on Jason's patches.

I also tested it to verify it's working.

BTW, for some reason I did not get all the patches into my mailbox and I
suspect they were not all sent. Did you get all the series 0-13?

Please let me know, and if needed I'll resend.

> 
> > git pull git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux.git mlx5-next 
> > 
> > They also depend Jason Wang's patches: https://lkml.org/lkml/2020/7/1/301
> 
> The ones you included, right?
>

Right.
 
> > Jason, I had to resolve some conflicts so I would appreciate of you can verify
> > that it is ok.
> > 
> > The following series of patches provide VDPA support for Mellanox
> > devices. The supported devices are ConnectX6 DX and newer.
> > 
> > Currently, only a network driver is implemented; future patches will
> > introduce a block device driver. iperf performance on a single queue is
> > around 12 Gbps.  Future patches will introduce multi queue support.
> > 
> > The files are organized in such a way that code that can be used by
> > different VDPA implementations will be placed in a common are resides in
> > drivers/vdpa/mlx5/core.
> > 
> > Only virtual functions are currently supported. Also, certain firmware
> > capabilities must be set to enable the driver. Physical functions (PFs)
> > are skipped by the driver.
> > 
> > To make use of the VDPA net driver, one must load mlx5_vdpa. In such
> > case, VFs will be operated by the VDPA driver. Although one can see a
> > regular instance of a network driver on the VF, the VDPA driver takes
> > precedence over the NIC driver, steering-wize.
> > 
> > Currently, the device/interface infrastructure in mlx5_core is used to
> > probe drivers. Future patches will introduce virtbus as a means to
> > register devices and drivers and VDPA will be adapted to it.
> > 
> > The mlx5 mode of operation required to support VDPA is switchdev mode.
> > Once can use Linux or OVS bridge to take care of layer 2 switching.
> > 
> > In order to provide virtio networking to a guest, an updated version of
> > qemu is required. This version has been tested by the following quemu
> > version:
> > 
> > url: https://github.com/jasowang/qemu.git
> > branch: vdpa
> > Commit ID: 6f4e59b807db
> > 
> > 
> > V2->V3
> > Fix makefile to use include path relative to the root of the kernel
> > 
> > V3-V4
> > Rebase Jason's patches on linux-next branch
> > Fix krobot error on mips arch
> > Make use of the free callback to destroy resoruces on unload
> > Use VIRTIO_F_ACCESS_PLATFORM instead of legacy VIRTIO_F_IOMMU_PLATFORM
> > Add empty implementations for get_vq_notification() and get_vq_irq()
> > 
> > 
> > Eli Cohen (6):
> >   net/vdpa: Use struct for set/get vq state
> >   vdpa: Modify get_vq_state() to return error code
> >   vdpa/mlx5: Add hardware descriptive header file
> >   vdpa/mlx5: Add support library for mlx5 VDPA implementation
> >   vdpa/mlx5: Add shared memory registration code
> >   vdpa/mlx5: Add VDPA driver for supported mlx5 devices
> > 
> > Jason Wang (5):
> >   vhost-vdpa: refine ioctl pre-processing
> >   vhost: generialize backend features setting/getting
> >   vhost-vdpa: support get/set backend features
> >   vhost-vdpa: support IOTLB batching hints
> >   vdpasim: support batch updating
> > 
> > Max Gurtovoy (1):
> >   vdpa: remove hard coded virtq num
> > 
> >  drivers/vdpa/Kconfig                   |   19 +
> >  drivers/vdpa/Makefile                  |    1 +
> >  drivers/vdpa/ifcvf/ifcvf_base.c        |    4 +-
> >  drivers/vdpa/ifcvf/ifcvf_base.h        |    4 +-
> >  drivers/vdpa/ifcvf/ifcvf_main.c        |   13 +-
> >  drivers/vdpa/mlx5/Makefile             |    4 +
> >  drivers/vdpa/mlx5/core/mlx5_vdpa.h     |   91 ++
> >  drivers/vdpa/mlx5/core/mlx5_vdpa_ifc.h |  168 ++
> >  drivers/vdpa/mlx5/core/mr.c            |  484 ++++++
> >  drivers/vdpa/mlx5/core/resources.c     |  284 ++++
> >  drivers/vdpa/mlx5/net/main.c           |   76 +
> >  drivers/vdpa/mlx5/net/mlx5_vnet.c      | 1965 ++++++++++++++++++++++++
> >  drivers/vdpa/mlx5/net/mlx5_vnet.h      |   24 +
> >  drivers/vdpa/vdpa.c                    |    3 +
> >  drivers/vdpa/vdpa_sim/vdpa_sim.c       |   53 +-
> >  drivers/vhost/net.c                    |   18 +-
> >  drivers/vhost/vdpa.c                   |   76 +-
> >  drivers/vhost/vhost.c                  |   15 +
> >  drivers/vhost/vhost.h                  |    2 +
> >  include/linux/vdpa.h                   |   24 +-
> >  include/uapi/linux/vhost.h             |    2 +
> >  include/uapi/linux/vhost_types.h       |   11 +
> >  22 files changed, 3284 insertions(+), 57 deletions(-)
> >  create mode 100644 drivers/vdpa/mlx5/Makefile
> >  create mode 100644 drivers/vdpa/mlx5/core/mlx5_vdpa.h
> >  create mode 100644 drivers/vdpa/mlx5/core/mlx5_vdpa_ifc.h
> >  create mode 100644 drivers/vdpa/mlx5/core/mr.c
> >  create mode 100644 drivers/vdpa/mlx5/core/resources.c
> >  create mode 100644 drivers/vdpa/mlx5/net/main.c
> >  create mode 100644 drivers/vdpa/mlx5/net/mlx5_vnet.c
> >  create mode 100644 drivers/vdpa/mlx5/net/mlx5_vnet.h
> > 
> > -- 
> > 2.26.0
> 

Powered by blists - more mailing lists