[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <1596610933-32599-17-git-send-email-alain.volmat@st.com>
Date: Wed, 5 Aug 2020 09:02:11 +0200
From: Alain Volmat <alain.volmat@...com>
To: <broonie@...nel.org>, <amelie.delaunay@...com>
CC: <mcoquelin.stm32@...il.com>, <alexandre.torgue@...com>,
<linux-spi@...r.kernel.org>,
<linux-stm32@...md-mailman.stormreply.com>,
<linux-arm-kernel@...ts.infradead.org>,
<linux-kernel@...r.kernel.org>, <fabrice.gasnier@...com>,
<alain.volmat@...com>
Subject: [PATCH 16/18] spi: stm32: always perform registers configuration prior to transfer
SPI registers content may have been lost upon suspend/resume sequence.
So, always compute and apply the necessary configuration in
stm32_spi_transfer_one_setup routine.
Signed-off-by: Alain Volmat <alain.volmat@...com>
---
drivers/spi/spi-stm32.c | 42 +++++++++++++++++-------------------------
1 file changed, 17 insertions(+), 25 deletions(-)
diff --git a/drivers/spi/spi-stm32.c b/drivers/spi/spi-stm32.c
index 2665d8d7f318..177f82700de0 100644
--- a/drivers/spi/spi-stm32.c
+++ b/drivers/spi/spi-stm32.c
@@ -1579,41 +1579,33 @@ static int stm32_spi_transfer_one_setup(struct stm32_spi *spi,
unsigned long flags;
unsigned int comm_type;
int nb_words, ret = 0;
+ int mbr;
spin_lock_irqsave(&spi->lock, flags);
spi->cur_xferlen = transfer->len;
- if (spi->cur_bpw != transfer->bits_per_word) {
- spi->cur_bpw = transfer->bits_per_word;
- spi->cfg->set_bpw(spi);
- }
-
- if (spi->cur_speed != transfer->speed_hz) {
- int mbr;
-
- /* Update spi->cur_speed with real clock speed */
- mbr = stm32_spi_prepare_mbr(spi, transfer->speed_hz,
- spi->cfg->baud_rate_div_min,
- spi->cfg->baud_rate_div_max);
- if (mbr < 0) {
- ret = mbr;
- goto out;
- }
+ spi->cur_bpw = transfer->bits_per_word;
+ spi->cfg->set_bpw(spi);
- transfer->speed_hz = spi->cur_speed;
- stm32_spi_set_mbr(spi, mbr);
+ /* Update spi->cur_speed with real clock speed */
+ mbr = stm32_spi_prepare_mbr(spi, transfer->speed_hz,
+ spi->cfg->baud_rate_div_min,
+ spi->cfg->baud_rate_div_max);
+ if (mbr < 0) {
+ ret = mbr;
+ goto out;
}
- comm_type = stm32_spi_communication_type(spi_dev, transfer);
- if (spi->cur_comm != comm_type) {
- ret = spi->cfg->set_mode(spi, comm_type);
+ transfer->speed_hz = spi->cur_speed;
+ stm32_spi_set_mbr(spi, mbr);
- if (ret < 0)
- goto out;
+ comm_type = stm32_spi_communication_type(spi_dev, transfer);
+ ret = spi->cfg->set_mode(spi, comm_type);
+ if (ret < 0)
+ goto out;
- spi->cur_comm = comm_type;
- }
+ spi->cur_comm = comm_type;
if (spi->cfg->set_data_idleness)
spi->cfg->set_data_idleness(spi, transfer->len);
--
2.7.4
Powered by blists - more mailing lists