| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Wed, 5 Aug 2020 10:46:13 +0800
From: Ming Lei <ming.lei@...hat.com>
To: Coly Li <colyli@...e.de>
Cc: linux-block@...r.kernel.org, linux-bcache@...r.kernel.org,
linux-kernel@...r.kernel.org, Hannes Reinecke <hare@...e.com>,
Xiao Ni <xni@...hat.com>, Bart Van Assche <bvanassche@....org>,
Christoph Hellwig <hch@....de>,
Enzo Matsumiya <ematsumiya@...e.com>,
Jens Axboe <axboe@...nel.dk>, Evan Green <evgreen@...omium.org>
Subject: Re: [PATCH] block: tolerate 0 byte discard_granularity in
__blkdev_issue_discard()
On Wed, Aug 05, 2020 at 09:54:00AM +0800, Coly Li wrote:
> On 2020/8/5 07:58, Ming Lei wrote:
> > On Tue, Aug 04, 2020 at 10:23:32PM +0800, Coly Li wrote:
> >> When some buggy driver doesn't set its queue->limits.discard_granularity
> >> (e.g. current loop device driver), discard at LBA 0 on such device will
> >> trigger a kernel BUG() panic from block/blk-mq.c:563.
> >>
> >> [ 955.565006][ C39] ------------[ cut here ]------------
> >> [ 955.559660][ C39] invalid opcode: 0000 [#1] SMP NOPTI
> >> [ 955.622171][ C39] CPU: 39 PID: 248 Comm: ksoftirqd/39 Tainted: G E 5.8.0-default+ #40
> >> [ 955.622171][ C39] Hardware name: Lenovo ThinkSystem SR650 -[7X05CTO1WW]-/-[7X05CTO1WW]-, BIOS -[IVE160M-2.70]- 07/17/2020
> >> [ 955.622175][ C39] RIP: 0010:blk_mq_end_request+0x107/0x110
> >> [ 955.622177][ C39] Code: 48 8b 03 e9 59 ff ff ff 48 89 df 5b 5d 41 5c e9 9f ed ff ff 48 8b 35 98 3c f4 00 48 83 c7 10 48 83 c6 19 e8 cb 56 c9 ff eb cb <0f> 0b 0f 1f 80 00 00 00 00 0f 1f 44 00 00 55 48 89 e5 41 56 41 54
> >> [ 955.622179][ C39] RSP: 0018:ffffb1288701fe28 EFLAGS: 00010202
> >> [ 955.749277][ C39] RAX: 0000000000000001 RBX: ffff956fffba5080 RCX: 0000000000004003
> >> [ 955.749278][ C39] RDX: 0000000000000003 RSI: 0000000000000000 RDI: 0000000000000000
> >> [ 955.749279][ C39] RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000
> >> [ 955.749279][ C39] R10: ffffb1288701fd28 R11: 0000000000000001 R12: ffffffffa8e05160
> >> [ 955.749280][ C39] R13: 0000000000000004 R14: 0000000000000004 R15: ffffffffa7ad3a1e
> >> [ 955.749281][ C39] FS: 0000000000000000(0000) GS:ffff95bfbda00000(0000) knlGS:0000000000000000
> >> [ 955.749282][ C39] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
> >> [ 955.749282][ C39] CR2: 00007f6f0ef766a8 CR3: 0000005a37012002 CR4: 00000000007606e0
> >> [ 955.749283][ C39] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
> >> [ 955.749284][ C39] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
> >> [ 955.749284][ C39] PKRU: 55555554
> >> [ 955.749285][ C39] Call Trace:
> >> [ 955.749290][ C39] blk_done_softirq+0x99/0xc0
> >> [ 957.550669][ C39] __do_softirq+0xd3/0x45f
> >> [ 957.550677][ C39] ? smpboot_thread_fn+0x2f/0x1e0
> >> [ 957.550679][ C39] ? smpboot_thread_fn+0x74/0x1e0
> >> [ 957.550680][ C39] ? smpboot_thread_fn+0x14e/0x1e0
> >> [ 957.550684][ C39] run_ksoftirqd+0x30/0x60
> >> [ 957.550687][ C39] smpboot_thread_fn+0x149/0x1e0
> >> [ 957.886225][ C39] ? sort_range+0x20/0x20
> >> [ 957.886226][ C39] kthread+0x137/0x160
> >> [ 957.886228][ C39] ? kthread_park+0x90/0x90
> >> [ 957.886231][ C39] ret_from_fork+0x22/0x30
> >> [ 959.117120][ C39] ---[ end trace 3dacdac97e2ed164 ]---
> >>
> >> This is the procedure to reproduce the panic,
> >> # modprobe scsi_debug delay=0 dev_size_mb=2048 max_queue=1
> >> # losetup -f /dev/nvme0n1 --direct-io=on
> >> # blkdiscard /dev/loop0 -o 0 -l 0x200
> >>
> >> This is how the BUG() panic triggered by __blkdev_issue_discard(),
> >> - For a NVMe SSD backing loop device, the driver does not initialize
> >> its queue->limits.discard_granularity and leaves it to 0.
> >> - When discard on LBA 0 of the loop device, __blkdev_issue_discard()
> >> is called before loop device driver code.
> >> - Inside __blkdev_issue_discard(), when calculating value of
> >> granularity_aligned_lba by
> >> granularity_aligned_lba = round_up(sector_mapped,
> >> q->limits.discard_granularity >> SECTOR_SHIFT);
> >> because sector_mapped is 0 (at LBA 0 and no partition offset), and
> >> q->limits.discard_granularity is 0 (by the buggy loop driver), the
> >> calculated granularity_aligned_lba is 0.
> >> - The inline function bio_aligned_discard_max_sectors() is defined as
> >> return round_down(UINT_MAX, q->limits.discard_granularity) >>
> >> SECTOR_SHIFT;
> >> when q->limits.discard_granularity is 0 from loop device driver, the
> >> above calculation returns value 0.
> >> - Now granularity_aligned_lba and sctor_mapped are 0, req_sectors is
> >> calculated by the following lines in __blkdev_issue_discard(),
> >> if (granularity_aligned_lba == sector_mapped)
> >> req_sects = min_t(sector_t, nr_sects,
> >> bio_aligned_discard_max_sectors(q));
> >> because bio_aligned_discard_max_sectors(q) returns 0, req_sects is
> >> calculated as 0.
> >> - Now a discard bio is mistakenly initialized as a 0 byte bio by,
> >> bio->bi_iter.bi_size = req_sects << 9;
> >> and sent to loop device driver.
> >> - This discard request is handled by loop device driver by following
> >> code path,
> >> loop_handle_cmd => do_req_filebacked => lo_fallocate =>
> >> file->f_op->fallocate => blkdev_fallocate => blkdev_issue_zeroout =>
> >> __blkdev_issue_write_zeroes
> >> - Inside __blkdev_issue_write_zeroes(), a 0 byte length discard bio is
> >> composed and sent to the backing device of the loop device.
> >> - In the I/O completion code path, in my case it is,
> >> blk_done_softirq => nrq->q->mq_ops->complete => nvme_pci_complete_rq
> >> => nvme_complete_rq => blk_mq_end_request
> >> inside blk_mq_end_request(), blk_update_request() is called and due to
> >> req->bio is NULL in previous step, blk_update_request() returns false
> >> then the BUG() panic in blk_mq_end_request() is triggered.
> >>
> >> Although the above panic can be fixed in loop device driver, the generic
> >> __blkdev_issue_discard() should also be fixed to tolerate the incorrect
> >> 0 value from queue->limits.discard_granularity, in case some other buggy
> >> driver makes such mistake again.
> >>
> >> This patch checks whether q->limits.discard_granularity is 0 in
> >> __blkdev_issue_discard() and bio_aligned_discard_max_sectors(). If it is
> >> 0 from some buggy driver queue, prints a warning oops information and
> >> set queue_logical_block_size(q) to a local variable discard_granularity.
> >> This local variable is used in round_up() and round_down() calculation,
> >> now req_sects won't be 0 and no empty discard request is generated.
> >>
> >> Fixes: 9b15d109a6b2 ("block: improve discard bio alignment in __blkdev_issue_discard()")
> >> Fixes: c52abf563049 ("loop: Better discard support for block devices")
> >> Reported-by: Ming Lei <ming.lei@...hat.com>
> >> Signed-off-by: Coly Li <colyli@...e.de>
> >> Cc: Hannes Reinecke <hare@...e.com>
> >> Cc: Ming Lei <ming.lei@...hat.com>
> >> Cc: Xiao Ni <xni@...hat.com>
> >> Cc: Bart Van Assche <bvanassche@....org>
> >> Cc: Christoph Hellwig <hch@....de>
> >> Cc: Enzo Matsumiya <ematsumiya@...e.com>
> >> Cc: Jens Axboe <axboe@...nel.dk>
> >> Cc: Evan Green <evgreen@...omium.org>
> >> ---
> >> block/blk-lib.c | 8 +++++++-
> >> block/blk.h | 9 +++++++--
> >> 2 files changed, 14 insertions(+), 3 deletions(-)
> >>
> >> diff --git a/block/blk-lib.c b/block/blk-lib.c
> >> index 019e09bb9c0e..3017e4cba923 100644
> >> --- a/block/blk-lib.c
> >> +++ b/block/blk-lib.c
> >> @@ -30,6 +30,7 @@ int __blkdev_issue_discard(struct block_device *bdev, sector_t sector,
> >> struct bio *bio = *biop;
> >> unsigned int op;
> >> sector_t bs_mask, part_offset = 0;
> >> + sector_t discard_granularity;
> >>
> >> if (!q)
> >> return -ENXIO;
> >> @@ -54,6 +55,11 @@ int __blkdev_issue_discard(struct block_device *bdev, sector_t sector,
> >> if (!nr_sects)
> >> return -EINVAL;
> >>
> >> + discard_granularity = q->limits.discard_granularity;
> >> + /* In case some buggy driver does not set limits.discard_granularity */
> >> + if (WARN_ON_ONCE(discard_granularity == 0))
> >> + discard_granularity = queue_logical_block_size(q);
> >
> > This code path is supposed to not run in case of zero q->limits.discard_granularity,
> > and looks it is fine to just warn and return -EINVAL in this case,
> > see Documentation/ABI/testing/sysfs-block:
> >
> > What: /sys/block/<disk>/queue/discard_granularity
> > Date: May 2011
> > Contact: Martin K. Petersen <martin.petersen@...cle.com>
> > Description:
> > Devices that support discard functionality may
> > internally allocate space using units that are bigger
> > than the logical block size. The discard_granularity
> > parameter indicates the size of the internal allocation
> > unit in bytes if reported by the device. Otherwise the
> > discard_granularity will be set to match the device's
> > physical block size. A discard_granularity of 0 means
> > that the device does not support discard functionality.
> >
> > What we need to fix is loop driver, if it claims to support discard,
> > q->limits.discard_granularity has to be one valid value.
>
> Yes your suggestion is much simpler, let me do it :-)
That is exactly what the following patch does:
https://lore.kernel.org/linux-block/6f642b8a-648e-8b59-067f-6c9f4cc32fa6@suse.de/T/#m82a878277ae7ed6b7a595820112fd13beaa24c99
Thanks,
Ming
Powered by blists - more mailing lists