linux-kernel - [PATCH v5 0/2] Add 802.1AD protocol support for dsa switch and ocelot driver

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-Id: <20200807111349.20649-1-hongbo.wang@nxp.com>
Date:   Fri,  7 Aug 2020 19:13:47 +0800
From:   hongbo.wang@....com
To:     xiaoliang.yang_1@....com, allan.nielsen@...rochip.com,
        po.liu@....com, claudiu.manoil@....com,
        alexandru.marginean@....com, vladimir.oltean@....com,
        leoyang.li@....com, mingkai.hu@....com, andrew@...n.ch,
        f.fainelli@...il.com, vivien.didelot@...il.com,
        davem@...emloft.net, jiri@...nulli.us, idosch@...sch.org,
        kuba@...nel.org, vinicius.gomes@...el.com,
        nikolay@...ulusnetworks.com, roopa@...ulusnetworks.com,
        netdev@...r.kernel.org, linux-kernel@...r.kernel.org,
        horatiu.vultur@...rochip.com, alexandre.belloni@...tlin.com,
        UNGLinuxDriver@...rochip.com, ivecera@...hat.com
Cc:     "hongbo.wang" <hongbo.wang@....com>
Subject: [PATCH v5 0/2] Add 802.1AD protocol support for dsa switch and ocelot driver

From: "hongbo.wang" <hongbo.wang@....com>

1. the patch 0001* is for setting single port into 802.1AD(QinQ) mode,
before this patch, the function dsa_slave_vlan_rx_add_vid didn't pass 
the parameter "proto" to next port level, so switch's port can't get
parameter "proto"
  after applying this patch, the following command can be supported:
  ip link set br0 type bridge vlan_protocol 802.1ad
  ip link add link swp1 name swp1.100 type vlan protocol 802.1ad id 100

2. the patch 0002* is for setting QinQ related registers in ocelot 
switch driver, after applying this patch, the switch(VSC99599)'s port can
enable or disable QinQ mode.

3. Version log
v5:
a. add devlink to enable qinq_mode of ocelot's single port
b. modify br_switchdev_port_vlan_add to pass bridge's vlan_proto to port driver
c. enable NETIF_F_HW_VLAN_STAG_FILTER in ocelot driver
v4:
a. modify slave.c to support "ip set br0 type bridge vlan_protocol 802.1ad"
b. modify ocelot.c, if enable QinQ, set VLAN_AWARE_ENA and VLAN_POP_CNT per
   port when vlan_filter=1
v3: combine two patches to one post

hongbo.wang (2):
  net: dsa: Add protocol support for 802.1AD when adding or  deleting
    vlan for dsa switch port
  net: dsa: ocelot: Add support for QinQ Operation

 drivers/net/dsa/ocelot/felix.c     | 124 +++++++++++++++++++++++++++++
 drivers/net/ethernet/mscc/ocelot.c |  40 ++++++++--
 include/net/switchdev.h            |   1 +
 include/soc/mscc/ocelot.h          |   4 +
 net/bridge/br_switchdev.c          |  22 +++++
 net/dsa/dsa_priv.h                 |   4 +-
 net/dsa/port.c                     |   6 +-
 net/dsa/slave.c                    |  53 +++++++-----
 net/dsa/tag_8021q.c                |   4 +-
 9 files changed, 228 insertions(+), 30 deletions(-)

-- 
2.17.1