linux-kernel - [RFT PATCH v5] serial: samsung: Removes the IRQ not found warning

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Date:   Mon, 10 Aug 2020 08:30:21 +0530
From:   Tamseel Shams <m.shams@...sung.com>
To:     kgene@...nel.org, krzk@...nel.org, gregkh@...uxfoundation.org,
        jslaby@...e.com
Cc:     linux-arm-kernel@...ts.infradead.org,
        linux-samsung-soc@...r.kernel.org, linux-serial@...r.kernel.org,
        linux-kernel@...r.kernel.org, alim.akhtar@...sung.com,
        Tamseel Shams <m.shams@...sung.com>
Subject: [RFT PATCH v5] serial: samsung: Removes the IRQ not found warning

In few older Samsung SoCs like s3c2410, s3c2412
and s3c2440, UART IP is having 2 interrupt lines.
However, in other SoCs like s3c6400, s5pv210,
exynos5433, and exynos4210 UART is having only 1
interrupt line. Due to this, "platform_get_irq(platdev, 1)"
call in the driver gives the following false-positive error:
"IRQ index 1 not found" on newer SoC's.

This patch adds the condition to check for Tx interrupt
only for the those SoC's which have 2 interrupt lines.

Signed-off-by: Tamseel Shams <m.shams@...sung.com>
---
Commit message is changed.

Added RFT, for older platform.
 
Addressed Krzysztof's review comments [1]
[1] -> https://lkml.org/lkml/2020/7/21/150

 drivers/tty/serial/samsung_tty.c | 8 +++++---
 1 file changed, 5 insertions(+), 3 deletions(-)

diff --git a/drivers/tty/serial/samsung_tty.c b/drivers/tty/serial/samsung_tty.c
index 6ef614d8648c..b923683e6a25 100644
--- a/drivers/tty/serial/samsung_tty.c
+++ b/drivers/tty/serial/samsung_tty.c
@@ -1911,9 +1911,11 @@ static int s3c24xx_serial_init_port(struct s3c24xx_uart_port *ourport,
 		ourport->tx_irq = ret + 1;
 	}
 
-	ret = platform_get_irq(platdev, 1);
-	if (ret > 0)
-		ourport->tx_irq = ret;
+	if (!s3c24xx_serial_has_interrupt_mask(port)) {
+		ret = platform_get_irq(platdev, 1);
+		if (ret > 0)
+			ourport->tx_irq = ret;
+	}
 	/*
 	 * DMA is currently supported only on DT platforms, if DMA properties
 	 * are specified.
-- 
2.17.1