| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20200811162732.1369-14-gage.eads@intel.com>
Date: Tue, 11 Aug 2020 11:27:26 -0500
From: Gage Eads <gage.eads@...el.com>
To: linux-kernel@...r.kernel.org, arnd@...db.de,
gregkh@...uxfoundation.org
Cc: magnus.karlsson@...el.com, bjorn.topel@...el.com
Subject: [PATCH v2 13/19] dlb2: add CQ interrupt support
DLB 2.0 supports interrupt-driven applications with per-CQ interrupts. A CQ
interrupt is armed by user-space software by enqueueing a special command
to the device through the port's MMIO window, and the interrupt fires when
the armed CQ becomes non-empty.
All CQ interrupts use a single MSI-X interrupt vector, and the ISR reads
bitmap registers to determine which CQ(s)'s interrupt fired. For each of
these CQs, the driver wakes up a wait-queue -- on which user-space threads
may be blocking waiting for the interrupt. User-space software calls a
block-on-CQ-interrupt ioctl in order to block on the wait queue.
A CQ's interrupt is enabled when its port is configured, and interrupts are
enabled/disabled when a port is enabled/disabled. If a port is disabled and
a thread is blocked on the wait queue, the thread is woken and returned to
user-space.
Signed-off-by: Gage Eads <gage.eads@...el.com>
Reviewed-by: Björn Töpel <bjorn.topel@...el.com>
---
drivers/misc/dlb2/Makefile | 1 +
drivers/misc/dlb2/dlb2_hw_types.h | 13 ++
drivers/misc/dlb2/dlb2_intr.c | 130 ++++++++++++++++
drivers/misc/dlb2/dlb2_intr.h | 29 ++++
drivers/misc/dlb2/dlb2_ioctl.c | 70 +++++++++
drivers/misc/dlb2/dlb2_main.c | 20 ++-
drivers/misc/dlb2/dlb2_main.h | 43 ++++++
drivers/misc/dlb2/dlb2_pf_ops.c | 211 ++++++++++++++++++++++++++
drivers/misc/dlb2/dlb2_resource.c | 306 ++++++++++++++++++++++++++++++++++++++
drivers/misc/dlb2/dlb2_resource.h | 128 ++++++++++++++++
include/uapi/linux/dlb2_user.h | 37 +++++
11 files changed, 987 insertions(+), 1 deletion(-)
create mode 100644 drivers/misc/dlb2/dlb2_intr.c
create mode 100644 drivers/misc/dlb2/dlb2_intr.h
diff --git a/drivers/misc/dlb2/Makefile b/drivers/misc/dlb2/Makefile
index 12361461dcff..64ec27489b73 100644
--- a/drivers/misc/dlb2/Makefile
+++ b/drivers/misc/dlb2/Makefile
@@ -6,6 +6,7 @@ obj-$(CONFIG_INTEL_DLB2) := dlb2.o
dlb2-objs := \
dlb2_main.o \
+ dlb2_intr.o \
dlb2_file.o \
dlb2_ioctl.o \
dlb2_pf_ops.o \
diff --git a/drivers/misc/dlb2/dlb2_hw_types.h b/drivers/misc/dlb2/dlb2_hw_types.h
index 7db59157da15..986d35cbeaf9 100644
--- a/drivers/misc/dlb2/dlb2_hw_types.h
+++ b/drivers/misc/dlb2/dlb2_hw_types.h
@@ -48,6 +48,19 @@
#define DLB2_MAX_QID_EMPTY_CHECK_LOOPS (32 * 64 * 1024 * (800 / 30))
#define DLB2_HZ 800000000
+/* Interrupt related macros */
+#define DLB2_PF_NUM_NON_CQ_INTERRUPT_VECTORS 1
+#define DLB2_PF_NUM_CQ_INTERRUPT_VECTORS 64
+#define DLB2_PF_TOTAL_NUM_INTERRUPT_VECTORS \
+ (DLB2_PF_NUM_NON_CQ_INTERRUPT_VECTORS + \
+ DLB2_PF_NUM_CQ_INTERRUPT_VECTORS)
+#define DLB2_PF_NUM_COMPRESSED_MODE_VECTORS \
+ (DLB2_PF_NUM_NON_CQ_INTERRUPT_VECTORS + 1)
+#define DLB2_PF_NUM_PACKED_MODE_VECTORS \
+ DLB2_PF_TOTAL_NUM_INTERRUPT_VECTORS
+#define DLB2_PF_COMPRESSED_MODE_CQ_VECTOR_ID \
+ DLB2_PF_NUM_NON_CQ_INTERRUPT_VECTORS
+
/*
* Hardware-defined base addresses. Those prefixed 'DLB2_DRV' are only used by
* the PF driver.
diff --git a/drivers/misc/dlb2/dlb2_intr.c b/drivers/misc/dlb2/dlb2_intr.c
new file mode 100644
index 000000000000..0e20197e96fb
--- /dev/null
+++ b/drivers/misc/dlb2/dlb2_intr.c
@@ -0,0 +1,130 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/* Copyright(c) 2017-2020 Intel Corporation */
+
+#include <linux/interrupt.h>
+#include <linux/uaccess.h>
+
+#include "dlb2_intr.h"
+#include "dlb2_main.h"
+#include "dlb2_resource.h"
+
+void dlb2_wake_thread(struct dlb2_dev *dev,
+ struct dlb2_cq_intr *intr,
+ enum dlb2_wake_reason reason)
+{
+ switch (reason) {
+ case WAKE_CQ_INTR:
+ WRITE_ONCE(intr->wake, true);
+ break;
+ case WAKE_PORT_DISABLED:
+ WRITE_ONCE(intr->disabled, true);
+ break;
+ default:
+ break;
+ }
+
+ wake_up_interruptible(&intr->wq_head);
+}
+
+static inline bool wake_condition(struct dlb2_cq_intr *intr,
+ struct dlb2_dev *dev,
+ struct dlb2_domain *domain)
+{
+ return (READ_ONCE(intr->wake) || READ_ONCE(intr->disabled));
+}
+
+struct dlb2_dequeue_qe {
+ u8 rsvd0[15];
+ u8 cq_gen:1;
+ u8 rsvd1:7;
+} __packed;
+
+/**
+ * dlb2_cq_empty() - determine whether a CQ is empty
+ * @dev: struct dlb2_dev pointer.
+ * @user_cq_va: User VA pointing to next CQ entry.
+ * @cq_gen: Current CQ generation bit.
+ *
+ * Return:
+ * Returns 1 if empty, 0 if non-empty, or < 0 if an error occurs.
+ */
+static int dlb2_cq_empty(struct dlb2_dev *dev, u64 user_cq_va, u8 cq_gen)
+{
+ struct dlb2_dequeue_qe qe;
+
+ if (copy_from_user(&qe, (void __user *)user_cq_va, sizeof(qe)))
+ return -EFAULT;
+
+ return qe.cq_gen != cq_gen;
+}
+
+int dlb2_block_on_cq_interrupt(struct dlb2_dev *dev,
+ struct dlb2_domain *dom,
+ int port_id,
+ bool is_ldb,
+ u64 cq_va,
+ u8 cq_gen,
+ bool arm)
+{
+ struct dlb2_cq_intr *intr;
+ int ret = 0;
+
+ if (is_ldb && port_id >= DLB2_MAX_NUM_LDB_PORTS)
+ return -EINVAL;
+ if (!is_ldb && port_id >= DLB2_MAX_NUM_DIR_PORTS)
+ return -EINVAL;
+
+ if (is_ldb)
+ intr = &dev->intr.ldb_cq_intr[port_id];
+ else
+ intr = &dev->intr.dir_cq_intr[port_id];
+
+ if (!intr->configured || intr->domain_id != dom->id)
+ return -EINVAL;
+
+ /*
+ * This function requires that only one thread process the CQ at a time.
+ * Otherwise, the wake condition could become false in the time between
+ * the ISR calling wake_up_interruptible() and the thread checking its
+ * wake condition.
+ */
+ mutex_lock(&intr->mutex);
+
+ /* Return early if the port's interrupt is disabled */
+ if (READ_ONCE(intr->disabled)) {
+ mutex_unlock(&intr->mutex);
+ return -EACCES;
+ }
+
+ dev_dbg(dev->dlb2_device,
+ "Thread is blocking on %s port %d's interrupt\n",
+ (is_ldb) ? "LDB" : "DIR", port_id);
+
+ /* Don't block if the CQ is non-empty */
+ ret = dlb2_cq_empty(dev, cq_va, cq_gen);
+ if (ret != 1)
+ goto error;
+
+ if (arm) {
+ ret = dev->ops->arm_cq_interrupt(dev, dom->id, port_id, is_ldb);
+ if (ret)
+ goto error;
+ }
+
+ ret = wait_event_interruptible(intr->wq_head,
+ wake_condition(intr, dev, dom));
+
+ if (ret == 0 && READ_ONCE(intr->disabled))
+ ret = -EACCES;
+
+ WRITE_ONCE(intr->wake, false);
+
+ dev_dbg(dev->dlb2_device,
+ "Thread is unblocked from %s port %d's interrupt\n",
+ (is_ldb) ? "LDB" : "DIR", port_id);
+
+error:
+ mutex_unlock(&intr->mutex);
+
+ return ret;
+}
diff --git a/drivers/misc/dlb2/dlb2_intr.h b/drivers/misc/dlb2/dlb2_intr.h
new file mode 100644
index 000000000000..613179795d8f
--- /dev/null
+++ b/drivers/misc/dlb2/dlb2_intr.h
@@ -0,0 +1,29 @@
+/* SPDX-License-Identifier: GPL-2.0-only
+ * Copyright(c) 2017-2020 Intel Corporation
+ */
+
+#ifndef __DLB2_INTR_H
+#define __DLB2_INTR_H
+
+#include <linux/pci.h>
+
+#include "dlb2_main.h"
+
+int dlb2_block_on_cq_interrupt(struct dlb2_dev *dev,
+ struct dlb2_domain *domain,
+ int port_id,
+ bool is_ldb,
+ u64 cq_va,
+ u8 cq_gen,
+ bool arm);
+
+enum dlb2_wake_reason {
+ WAKE_CQ_INTR,
+ WAKE_PORT_DISABLED,
+};
+
+void dlb2_wake_thread(struct dlb2_dev *dev,
+ struct dlb2_cq_intr *intr,
+ enum dlb2_wake_reason reason);
+
+#endif /* __DLB2_INTR_H */
diff --git a/drivers/misc/dlb2/dlb2_ioctl.c b/drivers/misc/dlb2/dlb2_ioctl.c
index 490c380670cc..010e67941cf9 100644
--- a/drivers/misc/dlb2/dlb2_ioctl.c
+++ b/drivers/misc/dlb2/dlb2_ioctl.c
@@ -7,6 +7,7 @@
#include <uapi/linux/dlb2_user.h>
#include "dlb2_file.h"
+#include "dlb2_intr.h"
#include "dlb2_ioctl.h"
#include "dlb2_main.h"
@@ -75,6 +76,10 @@ static int dlb2_domain_ioctl_enable_ldb_port(struct dlb2_dev *dev,
ret = dev->ops->enable_ldb_port(&dev->hw, domain->id, &arg, &response);
+ /* Allow threads to block on this port's CQ interrupt */
+ if (!ret)
+ WRITE_ONCE(dev->intr.ldb_cq_intr[arg.port_id].disabled, false);
+
mutex_unlock(&dev->resource_mutex);
BUILD_BUG_ON(offsetof(typeof(arg), response) != 0);
@@ -100,6 +105,10 @@ static int dlb2_domain_ioctl_enable_dir_port(struct dlb2_dev *dev,
ret = dev->ops->enable_dir_port(&dev->hw, domain->id, &arg, &response);
+ /* Allow threads to block on this port's CQ interrupt */
+ if (!ret)
+ WRITE_ONCE(dev->intr.dir_cq_intr[arg.port_id].disabled, false);
+
mutex_unlock(&dev->resource_mutex);
BUILD_BUG_ON(offsetof(typeof(arg), response) != 0);
@@ -125,6 +134,15 @@ static int dlb2_domain_ioctl_disable_ldb_port(struct dlb2_dev *dev,
ret = dev->ops->disable_ldb_port(&dev->hw, domain->id, &arg, &response);
+ /*
+ * Wake threads blocked on this port's CQ interrupt, and prevent
+ * subsequent attempts to block on it.
+ */
+ if (!ret)
+ dlb2_wake_thread(dev,
+ &dev->intr.ldb_cq_intr[arg.port_id],
+ WAKE_PORT_DISABLED);
+
mutex_unlock(&dev->resource_mutex);
BUILD_BUG_ON(offsetof(typeof(arg), response) != 0);
@@ -150,6 +168,15 @@ static int dlb2_domain_ioctl_disable_dir_port(struct dlb2_dev *dev,
ret = dev->ops->disable_dir_port(&dev->hw, domain->id, &arg, &response);
+ /*
+ * Wake threads blocked on this port's CQ interrupt, and prevent
+ * subsequent attempts to block on it.
+ */
+ if (!ret)
+ dlb2_wake_thread(dev,
+ &dev->intr.dir_cq_intr[arg.port_id],
+ WAKE_PORT_DISABLED);
+
mutex_unlock(&dev->resource_mutex);
BUILD_BUG_ON(offsetof(typeof(arg), response) != 0);
@@ -197,6 +224,13 @@ static int dlb2_domain_ioctl_create_ldb_port(struct dlb2_dev *dev,
if (ret)
goto unlock;
+ ret = dev->ops->enable_ldb_cq_interrupts(dev,
+ domain->id,
+ response.id,
+ arg.cq_depth_threshold);
+ if (ret)
+ goto unlock; /* Internal error, don't unwind port creation */
+
/* Fill out the per-port data structure */
dev->ldb_port[response.id].id = response.id;
dev->ldb_port[response.id].is_ldb = true;
@@ -255,6 +289,13 @@ static int dlb2_domain_ioctl_create_dir_port(struct dlb2_dev *dev,
if (ret)
goto unlock;
+ dev->ops->enable_dir_cq_interrupts(dev,
+ domain->id,
+ response.id,
+ arg.cq_depth_threshold);
+ if (ret)
+ goto unlock; /* Internal error, don't unwind port creation */
+
/* Fill out the per-port data structure */
dev->dir_port[response.id].id = response.id;
dev->dir_port[response.id].is_ldb = false;
@@ -280,6 +321,33 @@ static int dlb2_domain_ioctl_create_dir_port(struct dlb2_dev *dev,
return ret;
}
+static int dlb2_domain_ioctl_block_on_cq_interrupt(struct dlb2_dev *dev,
+ struct dlb2_domain *domain,
+ unsigned long user_arg)
+{
+ struct dlb2_block_on_cq_interrupt_args arg;
+ struct dlb2_cmd_response response = {0};
+ int ret = 0;
+
+ if (copy_from_user(&arg, (void __user *)user_arg, sizeof(arg)))
+ return -EFAULT;
+
+ ret = dlb2_block_on_cq_interrupt(dev,
+ domain,
+ arg.port_id,
+ arg.is_ldb,
+ arg.cq_va,
+ arg.cq_gen,
+ arg.arm);
+
+ BUILD_BUG_ON(offsetof(typeof(arg), response) != 0);
+
+ if (copy_to_user((void __user *)user_arg, &response, sizeof(response)))
+ return -EFAULT;
+
+ return ret;
+}
+
static int dlb2_create_port_fd(struct dlb2_dev *dev,
struct dlb2_domain *domain,
const char *prefix,
@@ -467,6 +535,8 @@ long dlb2_domain_ioctl(struct file *f, unsigned int cmd, unsigned long arg)
return dlb2_domain_ioctl_disable_ldb_port(dev, dom, arg);
case DLB2_IOC_DISABLE_DIR_PORT:
return dlb2_domain_ioctl_disable_dir_port(dev, dom, arg);
+ case DLB2_IOC_BLOCK_ON_CQ_INTERRUPT:
+ return dlb2_domain_ioctl_block_on_cq_interrupt(dev, dom, arg);
default:
return -ENOTTY;
}
diff --git a/drivers/misc/dlb2/dlb2_main.c b/drivers/misc/dlb2/dlb2_main.c
index 3fe59e99b402..b542c2c081a5 100644
--- a/drivers/misc/dlb2/dlb2_main.c
+++ b/drivers/misc/dlb2/dlb2_main.c
@@ -174,13 +174,20 @@ static void dlb2_release_device_memory(struct dlb2_dev *dev)
static int __dlb2_free_domain(struct dlb2_dev *dev, struct dlb2_domain *domain)
{
- int ret = 0;
+ int i, ret = 0;
ret = dev->ops->reset_domain(&dev->hw, domain->id);
/* Unpin and free all memory pages associated with the domain */
dlb2_release_domain_memory(dev, domain->id);
+ for (i = 0; i < DLB2_MAX_NUM_LDB_PORTS; i++)
+ if (dev->intr.ldb_cq_intr[i].domain_id == domain->id)
+ dev->intr.ldb_cq_intr[i].configured = false;
+ for (i = 0; i < DLB2_MAX_NUM_DIR_PORTS; i++)
+ if (dev->intr.dir_cq_intr[i].domain_id == domain->id)
+ dev->intr.dir_cq_intr[i].configured = false;
+
if (ret) {
dev->domain_reset_failed = true;
dev_err(dev->dlb2_device,
@@ -430,6 +437,10 @@ static int dlb2_probe(struct pci_dev *pdev,
if (ret)
goto dlb2_reset_fail;
+ ret = dlb2_dev->ops->init_interrupts(dlb2_dev, pdev);
+ if (ret)
+ goto init_interrupts_fail;
+
ret = dlb2_resource_init(&dlb2_dev->hw);
if (ret)
goto resource_init_fail;
@@ -458,6 +469,8 @@ static int dlb2_probe(struct pci_dev *pdev,
init_driver_state_fail:
dlb2_resource_free(&dlb2_dev->hw);
resource_init_fail:
+ dlb2_dev->ops->free_interrupts(dlb2_dev, pdev);
+init_interrupts_fail:
dlb2_reset_fail:
wait_for_device_ready_fail:
dma_set_mask_fail:
@@ -497,6 +510,8 @@ static void dlb2_remove(struct pci_dev *pdev)
dlb2_resource_free(&dlb2_dev->hw);
+ dlb2_dev->ops->free_interrupts(dlb2_dev, pdev);
+
dlb2_release_device_memory(dlb2_dev);
dlb2_dev->ops->device_destroy(dlb2_dev, dlb2_class);
@@ -521,6 +536,9 @@ static void dlb2_reset_hardware_state(struct dlb2_dev *dev)
{
dlb2_reset_device(dev->pdev);
+ /* Reinitialize interrupt configuration */
+ dev->ops->reinit_interrupts(dev);
+
/* Reinitialize any other hardware state */
dev->ops->init_hardware(dev);
}
diff --git a/drivers/misc/dlb2/dlb2_main.h b/drivers/misc/dlb2/dlb2_main.h
index 92e182603445..db462209fa6a 100644
--- a/drivers/misc/dlb2/dlb2_main.h
+++ b/drivers/misc/dlb2/dlb2_main.h
@@ -54,6 +54,21 @@ struct dlb2_device_ops {
dev_t base,
const struct file_operations *fops);
void (*cdev_del)(struct dlb2_dev *dlb2_dev);
+ int (*init_interrupts)(struct dlb2_dev *dev, struct pci_dev *pdev);
+ int (*enable_ldb_cq_interrupts)(struct dlb2_dev *dev,
+ int domain_id,
+ int port_id,
+ u16 thresh);
+ int (*enable_dir_cq_interrupts)(struct dlb2_dev *dev,
+ int domain_id,
+ int port_id,
+ u16 thresh);
+ int (*arm_cq_interrupt)(struct dlb2_dev *dev,
+ int domain_id,
+ int port_id,
+ bool is_ldb);
+ void (*reinit_interrupts)(struct dlb2_dev *dev);
+ void (*free_interrupts)(struct dlb2_dev *dev, struct pci_dev *pdev);
void (*enable_pm)(struct dlb2_dev *dev);
int (*wait_for_device_ready)(struct dlb2_dev *dev,
struct pci_dev *pdev);
@@ -152,6 +167,33 @@ struct dlb2_domain {
u8 id;
};
+struct dlb2_cq_intr {
+ wait_queue_head_t wq_head;
+ /*
+ * The CQ interrupt mutex guarantees one thread is blocking on a CQ's
+ * interrupt at a time.
+ */
+ struct mutex mutex;
+ u8 wake;
+ u8 configured;
+ u8 domain_id;
+ /*
+ * disabled is true if the port is disabled. In that
+ * case, the driver doesn't allow applications to block on the
+ * port's interrupt.
+ */
+ u8 disabled;
+} ____cacheline_aligned;
+
+struct dlb2_intr {
+ struct dlb2_cq_intr ldb_cq_intr[DLB2_MAX_NUM_LDB_PORTS];
+ struct dlb2_cq_intr dir_cq_intr[DLB2_MAX_NUM_DIR_PORTS];
+ u8 isr_registered[DLB2_PF_NUM_CQ_INTERRUPT_VECTORS];
+ int num_vectors;
+ int base_vector;
+ int mode;
+};
+
struct dlb2_dev {
struct pci_dev *pdev;
struct dlb2_hw hw;
@@ -167,6 +209,7 @@ struct dlb2_dev {
* device file mappings.
*/
struct inode *inode;
+ struct dlb2_intr intr;
/*
* The resource mutex serializes access to driver data structures and
* hardware registers.
diff --git a/drivers/misc/dlb2/dlb2_pf_ops.c b/drivers/misc/dlb2/dlb2_pf_ops.c
index 8b1aac196073..23a1e9ba0226 100644
--- a/drivers/misc/dlb2/dlb2_pf_ops.c
+++ b/drivers/misc/dlb2/dlb2_pf_ops.c
@@ -4,6 +4,7 @@
#include <linux/delay.h>
#include <linux/pm_runtime.h>
+#include "dlb2_intr.h"
#include "dlb2_main.h"
#include "dlb2_regs.h"
#include "dlb2_resource.h"
@@ -77,6 +78,210 @@ dlb2_pf_map_pci_bar_space(struct dlb2_dev *dlb2_dev,
return 0;
}
+/**********************************/
+/****** Interrupt management ******/
+/**********************************/
+
+static irqreturn_t
+dlb2_compressed_cq_intr_handler(int irq, void *hdlr_ptr)
+{
+ struct dlb2_dev *dev = (struct dlb2_dev *)hdlr_ptr;
+ u32 ldb_cq_interrupts[DLB2_MAX_NUM_LDB_PORTS / 32];
+ u32 dir_cq_interrupts[DLB2_MAX_NUM_DIR_PORTS / 32];
+ int i;
+
+ dlb2_read_compressed_cq_intr_status(&dev->hw,
+ ldb_cq_interrupts,
+ dir_cq_interrupts);
+
+ dlb2_ack_compressed_cq_intr(&dev->hw,
+ ldb_cq_interrupts,
+ dir_cq_interrupts);
+
+ for (i = 0; i < DLB2_MAX_NUM_LDB_PORTS; i++) {
+ if (!(ldb_cq_interrupts[i / 32] & (1 << (i % 32))))
+ continue;
+
+ dlb2_wake_thread(dev, &dev->intr.ldb_cq_intr[i], WAKE_CQ_INTR);
+ }
+
+ for (i = 0; i < DLB2_MAX_NUM_DIR_PORTS; i++) {
+ if (!(dir_cq_interrupts[i / 32] & (1 << (i % 32))))
+ continue;
+
+ dlb2_wake_thread(dev, &dev->intr.dir_cq_intr[i], WAKE_CQ_INTR);
+ }
+
+ return IRQ_HANDLED;
+}
+
+static int
+dlb2_init_compressed_mode_interrupts(struct dlb2_dev *dev,
+ struct pci_dev *pdev)
+{
+ int ret, irq;
+
+ irq = pci_irq_vector(pdev, DLB2_PF_COMPRESSED_MODE_CQ_VECTOR_ID);
+
+ ret = devm_request_irq(&pdev->dev,
+ irq,
+ dlb2_compressed_cq_intr_handler,
+ 0,
+ "dlb2_compressed_cq",
+ dev);
+ if (ret)
+ return ret;
+
+ dev->intr.isr_registered[DLB2_PF_COMPRESSED_MODE_CQ_VECTOR_ID] = true;
+
+ dev->intr.mode = DLB2_MSIX_MODE_COMPRESSED;
+
+ dlb2_set_msix_mode(&dev->hw, DLB2_MSIX_MODE_COMPRESSED);
+
+ return 0;
+}
+
+static void
+dlb2_pf_free_interrupts(struct dlb2_dev *dev,
+ struct pci_dev *pdev)
+{
+ int i;
+
+ for (i = 0; i < dev->intr.num_vectors; i++) {
+ if (dev->intr.isr_registered[i])
+ devm_free_irq(&pdev->dev, pci_irq_vector(pdev, i), dev);
+ }
+
+ pci_free_irq_vectors(pdev);
+}
+
+static int
+dlb2_pf_init_interrupts(struct dlb2_dev *dev, struct pci_dev *pdev)
+{
+ int ret, i;
+
+ /*
+ * DLB supports two modes for CQ interrupts:
+ * - "compressed mode": all CQ interrupts are packed into a single
+ * vector. The ISR reads six interrupt status registers to
+ * determine the source(s).
+ * - "packed mode" (unused): the hardware supports up to 64 vectors.
+ */
+
+ ret = pci_alloc_irq_vectors(pdev,
+ DLB2_PF_NUM_COMPRESSED_MODE_VECTORS,
+ DLB2_PF_NUM_COMPRESSED_MODE_VECTORS,
+ PCI_IRQ_MSIX);
+ if (ret < 0)
+ return ret;
+
+ dev->intr.num_vectors = ret;
+ dev->intr.base_vector = pci_irq_vector(pdev, 0);
+
+ ret = dlb2_init_compressed_mode_interrupts(dev, pdev);
+ if (ret) {
+ dlb2_pf_free_interrupts(dev, pdev);
+ return ret;
+ }
+
+ /*
+ * Initialize per-CQ interrupt structures, such as wait queues that
+ * threads will wait on until the CQ's interrupt fires.
+ */
+ for (i = 0; i < DLB2_MAX_NUM_LDB_PORTS; i++) {
+ init_waitqueue_head(&dev->intr.ldb_cq_intr[i].wq_head);
+ mutex_init(&dev->intr.ldb_cq_intr[i].mutex);
+ }
+
+ for (i = 0; i < DLB2_MAX_NUM_DIR_PORTS; i++) {
+ init_waitqueue_head(&dev->intr.dir_cq_intr[i].wq_head);
+ mutex_init(&dev->intr.dir_cq_intr[i].mutex);
+ }
+
+ return 0;
+}
+
+/*
+ * If the device is reset during use, its interrupt registers need to be
+ * reinitialized.
+ */
+static void
+dlb2_pf_reinit_interrupts(struct dlb2_dev *dev)
+{
+ dlb2_set_msix_mode(&dev->hw, DLB2_MSIX_MODE_COMPRESSED);
+}
+
+static int
+dlb2_pf_enable_ldb_cq_interrupts(struct dlb2_dev *dev,
+ int domain_id,
+ int id,
+ u16 thresh)
+{
+ int mode, vec;
+
+ if (dev->intr.mode == DLB2_MSIX_MODE_COMPRESSED) {
+ mode = DLB2_CQ_ISR_MODE_MSIX;
+ vec = 0;
+ } else {
+ mode = DLB2_CQ_ISR_MODE_MSIX;
+ vec = id % 64;
+ }
+
+ dev->intr.ldb_cq_intr[id].disabled = false;
+ dev->intr.ldb_cq_intr[id].configured = true;
+ dev->intr.ldb_cq_intr[id].domain_id = domain_id;
+
+ return dlb2_configure_ldb_cq_interrupt(&dev->hw, id, vec,
+ mode, 0, 0, thresh);
+}
+
+static int
+dlb2_pf_enable_dir_cq_interrupts(struct dlb2_dev *dev,
+ int domain_id,
+ int id,
+ u16 thresh)
+{
+ int mode, vec;
+
+ if (dev->intr.mode == DLB2_MSIX_MODE_COMPRESSED) {
+ mode = DLB2_CQ_ISR_MODE_MSIX;
+ vec = 0;
+ } else {
+ mode = DLB2_CQ_ISR_MODE_MSIX;
+ vec = id % 64;
+ }
+
+ dev->intr.dir_cq_intr[id].disabled = false;
+ dev->intr.dir_cq_intr[id].configured = true;
+ dev->intr.dir_cq_intr[id].domain_id = domain_id;
+
+ return dlb2_configure_dir_cq_interrupt(&dev->hw, id, vec,
+ mode, 0, 0, thresh);
+}
+
+static int
+dlb2_pf_arm_cq_interrupt(struct dlb2_dev *dev,
+ int domain_id,
+ int port_id,
+ bool is_ldb)
+{
+ int ret;
+
+ if (is_ldb)
+ ret = dev->ops->ldb_port_owned_by_domain(&dev->hw,
+ domain_id,
+ port_id);
+ else
+ ret = dev->ops->dir_port_owned_by_domain(&dev->hw,
+ domain_id,
+ port_id);
+
+ if (ret != 1)
+ return -EINVAL;
+
+ return dlb2_arm_cq_interrupt(&dev->hw, port_id, is_ldb, false, 0);
+}
+
/*******************************/
/****** Driver management ******/
/*******************************/
@@ -414,6 +619,12 @@ struct dlb2_device_ops dlb2_pf_ops = {
.device_destroy = dlb2_pf_device_destroy,
.cdev_add = dlb2_pf_cdev_add,
.cdev_del = dlb2_pf_cdev_del,
+ .init_interrupts = dlb2_pf_init_interrupts,
+ .enable_ldb_cq_interrupts = dlb2_pf_enable_ldb_cq_interrupts,
+ .enable_dir_cq_interrupts = dlb2_pf_enable_dir_cq_interrupts,
+ .arm_cq_interrupt = dlb2_pf_arm_cq_interrupt,
+ .reinit_interrupts = dlb2_pf_reinit_interrupts,
+ .free_interrupts = dlb2_pf_free_interrupts,
.enable_pm = dlb2_pf_enable_pm,
.wait_for_device_ready = dlb2_pf_wait_for_device_ready,
.create_sched_domain = dlb2_pf_create_sched_domain,
diff --git a/drivers/misc/dlb2/dlb2_resource.c b/drivers/misc/dlb2/dlb2_resource.c
index 665841ca7919..bfe20864515d 100644
--- a/drivers/misc/dlb2/dlb2_resource.c
+++ b/drivers/misc/dlb2/dlb2_resource.c
@@ -237,6 +237,41 @@ static struct dlb2_hw_domain *dlb2_get_domain_from_id(struct dlb2_hw *hw,
return NULL;
}
+static struct dlb2_ldb_port *dlb2_get_ldb_port_from_id(struct dlb2_hw *hw,
+ u32 id,
+ bool vdev_req,
+ unsigned int vdev_id)
+{
+ struct dlb2_function_resources *rsrcs;
+ struct dlb2_hw_domain *domain;
+ struct dlb2_ldb_port *port;
+ int i;
+
+ if (id >= DLB2_MAX_NUM_LDB_PORTS)
+ return NULL;
+
+ rsrcs = (vdev_req) ? &hw->vdev[vdev_id] : &hw->pf;
+
+ if (!vdev_req)
+ return &hw->rsrcs.ldb_ports[id];
+
+ DLB2_FUNC_LIST_FOR(rsrcs->used_domains, domain) {
+ for (i = 0; i < DLB2_NUM_COS_DOMAINS; i++) {
+ DLB2_DOM_LIST_FOR(domain->used_ldb_ports[i], port)
+ if (port->id.virt_id == id)
+ return port;
+ }
+ }
+
+ for (i = 0; i < DLB2_NUM_COS_DOMAINS; i++) {
+ DLB2_FUNC_LIST_FOR(rsrcs->avail_ldb_ports[i], port)
+ if (port->id.virt_id == id)
+ return port;
+ }
+
+ return NULL;
+}
+
static struct dlb2_ldb_port *
dlb2_get_domain_used_ldb_port(u32 id,
bool vdev_req,
@@ -289,6 +324,36 @@ dlb2_get_domain_ldb_port(u32 id,
return NULL;
}
+static struct dlb2_dir_pq_pair *dlb2_get_dir_pq_from_id(struct dlb2_hw *hw,
+ u32 id,
+ bool vdev_req,
+ unsigned int vdev_id)
+{
+ struct dlb2_function_resources *rsrcs;
+ struct dlb2_dir_pq_pair *port;
+ struct dlb2_hw_domain *domain;
+
+ if (id >= DLB2_MAX_NUM_DIR_PORTS)
+ return NULL;
+
+ rsrcs = (vdev_req) ? &hw->vdev[vdev_id] : &hw->pf;
+
+ if (!vdev_req)
+ return &hw->rsrcs.dir_pq_pairs[id];
+
+ DLB2_FUNC_LIST_FOR(rsrcs->used_domains, domain) {
+ DLB2_DOM_LIST_FOR(domain->used_dir_pq_pairs, port)
+ if (port->id.virt_id == id)
+ return port;
+ }
+
+ DLB2_FUNC_LIST_FOR(rsrcs->avail_dir_pq_pairs, port)
+ if (port->id.virt_id == id)
+ return port;
+
+ return NULL;
+}
+
static struct dlb2_dir_pq_pair *
dlb2_get_domain_used_dir_pq(u32 id,
bool vdev_req,
@@ -4685,6 +4750,247 @@ int dlb2_hw_disable_dir_port(struct dlb2_hw *hw,
return 0;
}
+void dlb2_set_msix_mode(struct dlb2_hw *hw, int mode)
+{
+ union dlb2_sys_msix_mode r0 = { {0} };
+
+ r0.field.mode = mode;
+
+ DLB2_CSR_WR(hw, DLB2_SYS_MSIX_MODE, r0.val);
+}
+
+int dlb2_configure_ldb_cq_interrupt(struct dlb2_hw *hw,
+ int port_id,
+ int vector,
+ int mode,
+ unsigned int vf,
+ unsigned int owner_vf,
+ u16 threshold)
+{
+ union dlb2_chp_ldb_cq_int_depth_thrsh r0 = { {0} };
+ union dlb2_chp_ldb_cq_int_enb r1 = { {0} };
+ union dlb2_sys_ldb_cq_isr r2 = { {0} };
+ struct dlb2_ldb_port *port;
+ bool vdev_req;
+
+ vdev_req = (mode == DLB2_CQ_ISR_MODE_MSI ||
+ mode == DLB2_CQ_ISR_MODE_ADI);
+
+ port = dlb2_get_ldb_port_from_id(hw, port_id, vdev_req, vf);
+ if (!port) {
+ DLB2_HW_ERR(hw,
+ "[%s()]: Internal error: failed to enable LDB CQ int\n\tport_id: %u, vdev_req: %u, vdev: %u\n",
+ __func__, port_id, vdev_req, vf);
+ return -EINVAL;
+ }
+
+ /* Trigger the interrupt when threshold or more QEs arrive in the CQ */
+ r0.field.depth_threshold = threshold - 1;
+
+ DLB2_CSR_WR(hw,
+ DLB2_CHP_LDB_CQ_INT_DEPTH_THRSH(port->id.phys_id),
+ r0.val);
+
+ r1.field.en_depth = 1;
+
+ DLB2_CSR_WR(hw, DLB2_CHP_LDB_CQ_INT_ENB(port->id.phys_id), r1.val);
+
+ r2.field.vector = vector;
+ r2.field.vf = owner_vf;
+ r2.field.en_code = mode;
+
+ DLB2_CSR_WR(hw, DLB2_SYS_LDB_CQ_ISR(port->id.phys_id), r2.val);
+
+ return 0;
+}
+
+int dlb2_configure_dir_cq_interrupt(struct dlb2_hw *hw,
+ int port_id,
+ int vector,
+ int mode,
+ unsigned int vf,
+ unsigned int owner_vf,
+ u16 threshold)
+{
+ union dlb2_chp_dir_cq_int_depth_thrsh r0 = { {0} };
+ union dlb2_chp_dir_cq_int_enb r1 = { {0} };
+ union dlb2_sys_dir_cq_isr r2 = { {0} };
+ struct dlb2_dir_pq_pair *port;
+ bool vdev_req;
+
+ vdev_req = (mode == DLB2_CQ_ISR_MODE_MSI ||
+ mode == DLB2_CQ_ISR_MODE_ADI);
+
+ port = dlb2_get_dir_pq_from_id(hw, port_id, vdev_req, vf);
+ if (!port) {
+ DLB2_HW_ERR(hw,
+ "[%s()]: Internal error: failed to enable DIR CQ int\n\tport_id: %u, vdev_req: %u, vdev: %u\n",
+ __func__, port_id, vdev_req, vf);
+ return -EINVAL;
+ }
+
+ /* Trigger the interrupt when threshold or more QEs arrive in the CQ */
+ r0.field.depth_threshold = threshold - 1;
+
+ DLB2_CSR_WR(hw,
+ DLB2_CHP_DIR_CQ_INT_DEPTH_THRSH(port->id.phys_id),
+ r0.val);
+
+ r1.field.en_depth = 1;
+
+ DLB2_CSR_WR(hw, DLB2_CHP_DIR_CQ_INT_ENB(port->id.phys_id), r1.val);
+
+ r2.field.vector = vector;
+ r2.field.vf = owner_vf;
+ r2.field.en_code = mode;
+
+ DLB2_CSR_WR(hw, DLB2_SYS_DIR_CQ_ISR(port->id.phys_id), r2.val);
+
+ return 0;
+}
+
+int dlb2_arm_cq_interrupt(struct dlb2_hw *hw,
+ int port_id,
+ bool is_ldb,
+ bool vdev_req,
+ unsigned int vdev_id)
+{
+ u32 val;
+ u32 reg;
+
+ if (vdev_req && is_ldb) {
+ struct dlb2_ldb_port *ldb_port;
+
+ ldb_port = dlb2_get_ldb_port_from_id(hw, port_id,
+ true, vdev_id);
+
+ if (!ldb_port || !ldb_port->configured)
+ return -EINVAL;
+
+ port_id = ldb_port->id.phys_id;
+ } else if (vdev_req && !is_ldb) {
+ struct dlb2_dir_pq_pair *dir_port;
+
+ dir_port = dlb2_get_dir_pq_from_id(hw, port_id, true, vdev_id);
+
+ if (!dir_port || !dir_port->port_configured)
+ return -EINVAL;
+
+ port_id = dir_port->id.phys_id;
+ }
+
+ val = 1 << (port_id % 32);
+
+ if (is_ldb && port_id < 32)
+ reg = DLB2_CHP_LDB_CQ_INTR_ARMED0;
+ else if (is_ldb && port_id < 64)
+ reg = DLB2_CHP_LDB_CQ_INTR_ARMED1;
+ else if (!is_ldb && port_id < 32)
+ reg = DLB2_CHP_DIR_CQ_INTR_ARMED0;
+ else
+ reg = DLB2_CHP_DIR_CQ_INTR_ARMED1;
+
+ DLB2_CSR_WR(hw, reg, val);
+
+ dlb2_flush_csr(hw);
+
+ return 0;
+}
+
+void dlb2_read_compressed_cq_intr_status(struct dlb2_hw *hw,
+ u32 *ldb_interrupts,
+ u32 *dir_interrupts)
+{
+ /* Read every CQ's interrupt status */
+
+ ldb_interrupts[0] = DLB2_CSR_RD(hw,
+ DLB2_SYS_LDB_CQ_31_0_OCC_INT_STS);
+ ldb_interrupts[1] = DLB2_CSR_RD(hw,
+ DLB2_SYS_LDB_CQ_63_32_OCC_INT_STS);
+
+ dir_interrupts[0] = DLB2_CSR_RD(hw,
+ DLB2_SYS_DIR_CQ_31_0_OCC_INT_STS);
+ dir_interrupts[1] = DLB2_CSR_RD(hw,
+ DLB2_SYS_DIR_CQ_63_32_OCC_INT_STS);
+}
+
+static void dlb2_ack_msix_interrupt(struct dlb2_hw *hw, int vector)
+{
+ union dlb2_sys_msix_ack r0 = { {0} };
+
+ switch (vector) {
+ case 0:
+ r0.field.msix_0_ack = 1;
+ break;
+ case 1:
+ r0.field.msix_1_ack = 1;
+ /*
+ * CSSY-1650
+ * workaround h/w bug for lost MSI-X interrupts
+ *
+ * The recommended workaround for acknowledging
+ * vector 1 interrupts is :
+ * 1: set MSI-X mask
+ * 2: set MSIX_PASSTHROUGH
+ * 3: clear MSIX_ACK
+ * 4: clear MSIX_PASSTHROUGH
+ * 5: clear MSI-X mask
+ *
+ * The MSIX-ACK (step 3) is cleared for all vectors
+ * below. We handle steps 1 & 2 for vector 1 here.
+ *
+ * The bitfields for MSIX_ACK and MSIX_PASSTHRU are
+ * defined the same, so we just use the MSIX_ACK
+ * value when writing to PASSTHRU.
+ */
+
+ /* set MSI-X mask and passthrough for vector 1 */
+ DLB2_FUNC_WR(hw, DLB2_MSIX_MEM_VECTOR_CTRL(1), 1);
+ DLB2_CSR_WR(hw, DLB2_SYS_MSIX_PASSTHRU, r0.val);
+ break;
+ }
+
+ /* clear MSIX_ACK (write one to clear) */
+ DLB2_CSR_WR(hw, DLB2_SYS_MSIX_ACK, r0.val);
+
+ if (vector == 1) {
+ /*
+ * finish up steps 4 & 5 of the workaround -
+ * clear pasthrough and mask
+ */
+ DLB2_CSR_WR(hw, DLB2_SYS_MSIX_PASSTHRU, 0);
+ DLB2_FUNC_WR(hw, DLB2_MSIX_MEM_VECTOR_CTRL(1), 0);
+ }
+
+ dlb2_flush_csr(hw);
+}
+
+void dlb2_ack_compressed_cq_intr(struct dlb2_hw *hw,
+ u32 *ldb_interrupts,
+ u32 *dir_interrupts)
+{
+ /* Write back the status regs to ack the interrupts */
+ if (ldb_interrupts[0])
+ DLB2_CSR_WR(hw,
+ DLB2_SYS_LDB_CQ_31_0_OCC_INT_STS,
+ ldb_interrupts[0]);
+ if (ldb_interrupts[1])
+ DLB2_CSR_WR(hw,
+ DLB2_SYS_LDB_CQ_63_32_OCC_INT_STS,
+ ldb_interrupts[1]);
+
+ if (dir_interrupts[0])
+ DLB2_CSR_WR(hw,
+ DLB2_SYS_DIR_CQ_31_0_OCC_INT_STS,
+ dir_interrupts[0]);
+ if (dir_interrupts[1])
+ DLB2_CSR_WR(hw,
+ DLB2_SYS_DIR_CQ_63_32_OCC_INT_STS,
+ dir_interrupts[1]);
+
+ dlb2_ack_msix_interrupt(hw, DLB2_PF_COMPRESSED_MODE_CQ_VECTOR_ID);
+}
+
static u32 dlb2_ldb_cq_inflight_count(struct dlb2_hw *hw,
struct dlb2_ldb_port *port)
{
diff --git a/drivers/misc/dlb2/dlb2_resource.h b/drivers/misc/dlb2/dlb2_resource.h
index a78a8664eabc..5fd7a30a1c1b 100644
--- a/drivers/misc/dlb2/dlb2_resource.h
+++ b/drivers/misc/dlb2/dlb2_resource.h
@@ -445,6 +445,134 @@ int dlb2_hw_disable_dir_port(struct dlb2_hw *hw,
unsigned int vdev_id);
/**
+ * dlb2_configure_ldb_cq_interrupt() - configure load-balanced CQ for
+ * interrupts
+ * @hw: dlb2_hw handle for a particular device.
+ * @port_id: load-balanced port ID.
+ * @vector: interrupt vector ID. Should be 0 for MSI or compressed MSI-X mode,
+ * else a value up to 64.
+ * @mode: interrupt type (DLB2_CQ_ISR_MODE_MSI or DLB2_CQ_ISR_MODE_MSIX)
+ * @vf: If the port is VF-owned, the VF's ID. This is used for translating the
+ * virtual port ID to a physical port ID. Ignored if mode is not MSI.
+ * @owner_vf: the VF to route the interrupt to. Ignore if mode is not MSI.
+ * @threshold: the minimum CQ depth at which the interrupt can fire. Must be
+ * greater than 0.
+ *
+ * This function configures the DLB registers for load-balanced CQ's
+ * interrupts. This doesn't enable the CQ's interrupt; that can be done with
+ * dlb2_arm_cq_interrupt() or through an interrupt arm QE.
+ *
+ * Return:
+ * Returns 0 upon success, < 0 otherwise.
+ *
+ * Errors:
+ * EINVAL - The port ID is invalid.
+ */
+int dlb2_configure_ldb_cq_interrupt(struct dlb2_hw *hw,
+ int port_id,
+ int vector,
+ int mode,
+ unsigned int vf,
+ unsigned int owner_vf,
+ u16 threshold);
+
+/**
+ * dlb2_configure_dir_cq_interrupt() - configure directed CQ for interrupts
+ * @hw: dlb2_hw handle for a particular device.
+ * @port_id: load-balanced port ID.
+ * @vector: interrupt vector ID. Should be 0 for MSI or compressed MSI-X mode,
+ * else a value up to 64.
+ * @mode: interrupt type (DLB2_CQ_ISR_MODE_MSI or DLB2_CQ_ISR_MODE_MSIX)
+ * @vf: If the port is VF-owned, the VF's ID. This is used for translating the
+ * virtual port ID to a physical port ID. Ignored if mode is not MSI.
+ * @owner_vf: the VF to route the interrupt to. Ignore if mode is not MSI.
+ * @threshold: the minimum CQ depth at which the interrupt can fire. Must be
+ * greater than 0.
+ *
+ * This function configures the DLB registers for directed CQ's interrupts.
+ * This doesn't enable the CQ's interrupt; that can be done with
+ * dlb2_arm_cq_interrupt() or through an interrupt arm QE.
+ *
+ * Return:
+ * Returns 0 upon success, < 0 otherwise.
+ *
+ * Errors:
+ * EINVAL - The port ID is invalid.
+ */
+int dlb2_configure_dir_cq_interrupt(struct dlb2_hw *hw,
+ int port_id,
+ int vector,
+ int mode,
+ unsigned int vf,
+ unsigned int owner_vf,
+ u16 threshold);
+
+/**
+ * dlb2_set_msix_mode() - enable certain hardware alarm interrupts
+ * @hw: dlb2_hw handle for a particular device.
+ * @mode: MSI-X mode (DLB2_MSIX_MODE_PACKED or DLB2_MSIX_MODE_COMPRESSED)
+ *
+ * This function configures the hardware to use either packed or compressed
+ * mode. This function should not be called if using MSI interrupts.
+ */
+void dlb2_set_msix_mode(struct dlb2_hw *hw, int mode);
+
+/**
+ * dlb2_arm_cq_interrupt() - arm a CQ's interrupt
+ * @hw: dlb2_hw handle for a particular device.
+ * @port_id: port ID
+ * @is_ldb: true for load-balanced port, false for a directed port
+ * @vdev_request: indicates whether this request came from a vdev.
+ * @vdev_id: If vdev_request is true, this contains the vdev's ID.
+ *
+ * This function arms the CQ's interrupt. The CQ must be configured prior to
+ * calling this function.
+ *
+ * The function does no parameter validation; that is the caller's
+ * responsibility.
+ *
+ * A vdev can be either an SR-IOV virtual function or a Scalable IOV virtual
+ * device.
+ *
+ * Return: returns 0 upon success, <0 otherwise.
+ *
+ * EINVAL - Invalid port ID.
+ */
+int dlb2_arm_cq_interrupt(struct dlb2_hw *hw,
+ int port_id,
+ bool is_ldb,
+ bool vdev_request,
+ unsigned int vdev_id);
+
+/**
+ * dlb2_read_compressed_cq_intr_status() - read compressed CQ interrupt status
+ * @hw: dlb2_hw handle for a particular device.
+ * @ldb_interrupts: 2-entry array of u32 bitmaps
+ * @dir_interrupts: 4-entry array of u32 bitmaps
+ *
+ * This function can be called from a compressed CQ interrupt handler to
+ * determine which CQ interrupts have fired. The caller should take appropriate
+ * (such as waking threads blocked on a CQ's interrupt) then ack the interrupts
+ * with dlb2_ack_compressed_cq_intr().
+ */
+void dlb2_read_compressed_cq_intr_status(struct dlb2_hw *hw,
+ u32 *ldb_interrupts,
+ u32 *dir_interrupts);
+
+/**
+ * dlb2_ack_compressed_cq_intr_status() - ack compressed CQ interrupts
+ * @hw: dlb2_hw handle for a particular device.
+ * @ldb_interrupts: 2-entry array of u32 bitmaps
+ * @dir_interrupts: 4-entry array of u32 bitmaps
+ *
+ * This function ACKs compressed CQ interrupts. Its arguments should be the
+ * same ones passed to dlb2_read_compressed_cq_intr_status().
+ */
+void dlb2_ack_compressed_cq_intr(struct dlb2_hw *hw,
+ u32 *ldb_interrupts,
+ u32 *dir_interrupts);
+
+/**
* dlb2_reset_domain() - reset a scheduling domain
* @hw: dlb2_hw handle for a particular device.
* @domain_id: domain ID.
diff --git a/include/uapi/linux/dlb2_user.h b/include/uapi/linux/dlb2_user.h
index 00e9833bae1b..9edeff826e15 100644
--- a/include/uapi/linux/dlb2_user.h
+++ b/include/uapi/linux/dlb2_user.h
@@ -609,6 +609,38 @@ struct dlb2_disable_dir_port_args {
__u32 padding0;
};
+/*
+ * DLB2_DOMAIN_CMD_BLOCK_ON_CQ_INTERRUPT: Block on a CQ interrupt until a QE
+ * arrives for the specified port. If a QE is already present, the ioctl
+ * will immediately return.
+ *
+ * Note: Only one thread can block on a CQ's interrupt at a time. Doing
+ * otherwise can result in hung threads.
+ *
+ * Input parameters:
+ * - port_id: Port ID.
+ * - is_ldb: True if the port is load-balanced, false otherwise.
+ * - arm: Tell the driver to arm the interrupt.
+ * - cq_gen: Current CQ generation bit.
+ * - padding0: Reserved for future use.
+ * - cq_va: VA of the CQ entry where the next QE will be placed.
+ *
+ * Output parameters:
+ * - response.status: Detailed error code. In certain cases, such as if the
+ * ioctl request arg is invalid, the driver won't set status.
+ */
+struct dlb2_block_on_cq_interrupt_args {
+ /* Output parameters */
+ struct dlb2_cmd_response response;
+ /* Input parameters */
+ __u32 port_id;
+ __u8 is_ldb;
+ __u8 arm;
+ __u8 cq_gen;
+ __u8 padding0;
+ __u64 cq_va;
+};
+
enum dlb2_domain_user_interface_commands {
DLB2_DOMAIN_CMD_CREATE_LDB_QUEUE,
DLB2_DOMAIN_CMD_CREATE_DIR_QUEUE,
@@ -628,6 +660,7 @@ enum dlb2_domain_user_interface_commands {
DLB2_DOMAIN_CMD_ENABLE_DIR_PORT,
DLB2_DOMAIN_CMD_DISABLE_LDB_PORT,
DLB2_DOMAIN_CMD_DISABLE_DIR_PORT,
+ DLB2_DOMAIN_CMD_BLOCK_ON_CQ_INTERRUPT,
/* NUM_DLB2_DOMAIN_CMD must be last */
NUM_DLB2_DOMAIN_CMD,
@@ -734,5 +767,9 @@ enum dlb2_domain_user_interface_commands {
_IOWR(DLB2_IOC_MAGIC, \
DLB2_DOMAIN_CMD_DISABLE_DIR_PORT, \
struct dlb2_disable_dir_port_args)
+#define DLB2_IOC_BLOCK_ON_CQ_INTERRUPT \
+ _IOWR(DLB2_IOC_MAGIC, \
+ DLB2_DOMAIN_CMD_BLOCK_ON_CQ_INTERRUPT, \
+ struct dlb2_block_on_cq_interrupt_args)
#endif /* __DLB2_USER_H */
--
2.13.6
Powered by blists - more mailing lists