linux-kernel - [PATCH 2/3] ipv4/icmp: l3mdev: Perform icmp error route lookup on source device routing table

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite for Android: free password hash cracker in your pocket

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20200811195003.1812-3-mathieu.desnoyers@efficios.com>
Date:   Tue, 11 Aug 2020 15:50:02 -0400
From:   Mathieu Desnoyers <mathieu.desnoyers@...icios.com>
To:     David Ahern <dsahern@...nel.org>
Cc:     linux-kernel@...r.kernel.org,
        Mathieu Desnoyers <mathieu.desnoyers@...icios.com>,
        "David S . Miller" <davem@...emloft.net>, netdev@...r.kernel.org
Subject: [PATCH 2/3] ipv4/icmp: l3mdev: Perform icmp error route lookup on source device routing table

As per RFC792, ICMP errors should be sent to the source host.

However, in configurations with Virtual Routing and Forwarding tables,
looking up which routing table to use is currently done by using the
destination net_device.

commit 9d1a6c4ea43e ("net: icmp_route_lookup should use rt dev to
determine L3 domain") changes the interface passed to
l3mdev_master_ifindex() and inet_addr_type_dev_table() from skb_in->dev
to skb_dst(skb_in)->dev. This effectively uses the destination device
rather than the source device for choosing which routing table should be
used to lookup where to send the ICMP error.

Therefore, if the source and destination interfaces are within separate
VRFs, or one in the global routing table and the other in a VRF, looking
up the source host in the destination interface's routing table will
fail if the destination interface's routing table contains no route to
the source host.

One observable effect of this issue is that traceroute does not work in
the following cases:

- Route leaking between global routing table and VRF
- Route leaking between VRFs

Preferably use the source device routing table when sending ICMP error
messages. If no source device is set, fall-back on the destination
device routing table.

Fixes: 9d1a6c4ea43e ("net: icmp_route_lookup should use rt dev to determine L3 domain")
Link: https://tools.ietf.org/html/rfc792
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@...icios.com>
Cc: David Ahern <dsahern@...nel.org>
Cc: David S. Miller <davem@...emloft.net>
Cc: netdev@...r.kernel.org
---
 net/ipv4/icmp.c | 15 +++++++++++++--
 1 file changed, 13 insertions(+), 2 deletions(-)

diff --git a/net/ipv4/icmp.c b/net/ipv4/icmp.c
index cf36f955bfe6..1eb83d82ec68 100644
--- a/net/ipv4/icmp.c
+++ b/net/ipv4/icmp.c
@@ -465,6 +465,7 @@ static struct rtable *icmp_route_lookup(struct net *net,
 					int type, int code,
 					struct icmp_bxm *param)
 {
+	struct net_device *route_lookup_dev = NULL;
 	struct rtable *rt, *rt2;
 	struct flowi4 fl4_dec;
 	int err;
@@ -479,7 +480,17 @@ static struct rtable *icmp_route_lookup(struct net *net,
 	fl4->flowi4_proto = IPPROTO_ICMP;
 	fl4->fl4_icmp_type = type;
 	fl4->fl4_icmp_code = code;
-	fl4->flowi4_oif = l3mdev_master_ifindex(skb_dst(skb_in)->dev);
+	/*
+	 * The device used for looking up which routing table to use is
+	 * preferably the source whenever it is set, which should ensure
+	 * the icmp error can be sent to the source host, else fallback
+	 * on the destination device.
+	 */
+	if (skb_in->dev)
+		route_lookup_dev = skb_in->dev;
+	else if (skb_dst(skb_in))
+		route_lookup_dev = skb_dst(skb_in)->dev;
+	fl4->flowi4_oif = l3mdev_master_ifindex(route_lookup_dev);

 	security_skb_classify_flow(skb_in, flowi4_to_flowi(fl4));
 	rt = ip_route_output_key_hash(net, fl4, skb_in);
@@ -503,7 +514,7 @@ static struct rtable *icmp_route_lookup(struct net *net,
 	if (err)
 		goto relookup_failed;

-	if (inet_addr_type_dev_table(net, skb_dst(skb_in)->dev,
+	if (inet_addr_type_dev_table(net, route_lookup_dev,
 				     fl4_dec.saddr) == RTN_LOCAL) {
 		rt2 = __ip_route_output_key(net, &fl4_dec);
 		if (IS_ERR(rt2))
-- 
2.17.1