lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20200811024135.GD13513@pendragon.ideasonboard.com>
Date:   Tue, 11 Aug 2020 05:41:35 +0300
From:   Laurent Pinchart <laurent.pinchart@...asonboard.com>
To:     Swapnil Jakhade <sjakhade@...ence.com>
Cc:     airlied@...ux.ie, daniel@...ll.ch, robh+dt@...nel.org,
        a.hajda@...sung.com, narmstrong@...libre.com, jonas@...boo.se,
        jernej.skrabec@...l.net, dri-devel@...ts.freedesktop.org,
        devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
        mparab@...ence.com, yamonkar@...ence.com, tomi.valkeinen@...com,
        jsarha@...com, nsekhar@...com, praneeth@...com
Subject: Re: [PATCH v8 3/3] drm: bridge: cdns-mhdp: Add j721e wrapper

Hi Swapnil,

Thank you for the patch.

On Thu, Aug 06, 2020 at 01:34:32PM +0200, Swapnil Jakhade wrote:
> Add j721e wrapper for mhdp, which sets up the clock and data muxes.
> 
> Signed-off-by: Jyri Sarha <jsarha@...com>
> Signed-off-by: Yuti Amonkar <yamonkar@...ence.com>
> Signed-off-by: Swapnil Jakhade <sjakhade@...ence.com>
> Reviewed-by: Tomi Valkeinen <tomi.valkeinen@...com>
> Reviewed-by: Laurent Pinchart <laurent.pinchart@...asonboard.com>
> ---
>  drivers/gpu/drm/bridge/Kconfig           | 13 +++++
>  drivers/gpu/drm/bridge/Makefile          |  2 +
>  drivers/gpu/drm/bridge/cdns-mhdp-core.c  | 15 +++++
>  drivers/gpu/drm/bridge/cdns-mhdp-core.h  |  1 +
>  drivers/gpu/drm/bridge/cdns-mhdp-j721e.c | 72 ++++++++++++++++++++++++
>  drivers/gpu/drm/bridge/cdns-mhdp-j721e.h | 19 +++++++
>  6 files changed, 122 insertions(+)
>  create mode 100644 drivers/gpu/drm/bridge/cdns-mhdp-j721e.c
>  create mode 100644 drivers/gpu/drm/bridge/cdns-mhdp-j721e.h
> 
> diff --git a/drivers/gpu/drm/bridge/Kconfig b/drivers/gpu/drm/bridge/Kconfig
> index 6a4c324302a8..8c1738653b7e 100644
> --- a/drivers/gpu/drm/bridge/Kconfig
> +++ b/drivers/gpu/drm/bridge/Kconfig
> @@ -38,6 +38,19 @@ config DRM_CDNS_MHDP
>  	  It takes a DPI stream as input and outputs it encoded
>  	  in DP format.
>  
> +if DRM_CDNS_MHDP
> +
> +config DRM_CDNS_MHDP_J721E
> +	depends on ARCH_K3_J721E_SOC

	depends on ARCH_K3_J721E_SOC || COMPILE_TEST

> +	bool "J721E Cadence DPI/DP wrapper support"
> +	default y
> +	help
> +	  Support J721E Cadence DPI/DP wrapper. This is a wrapper
> +	  which adds support for J721E related platform ops. It
> +	  initializes the J721e Display Port and sets up the
> +	  clock and data muxes.
> +endif
> +
>  config DRM_CHRONTEL_CH7033
>  	tristate "Chrontel CH7033 Video Encoder"
>  	depends on OF
> diff --git a/drivers/gpu/drm/bridge/Makefile b/drivers/gpu/drm/bridge/Makefile
> index 7046bf077603..be92ebf620b6 100644
> --- a/drivers/gpu/drm/bridge/Makefile
> +++ b/drivers/gpu/drm/bridge/Makefile
> @@ -2,6 +2,8 @@
>  obj-$(CONFIG_DRM_CDNS_DSI) += cdns-dsi.o
>  obj-$(CONFIG_DRM_CDNS_MHDP) += cdns-mhdp.o
>  cdns-mhdp-y := cdns-mhdp-core.o
> +cdns-mhdp-$(CONFIG_DRM_CDNS_MHDP_J721E) += cdns-mhdp-j721e.o
> +
>  obj-$(CONFIG_DRM_CHRONTEL_CH7033) += chrontel-ch7033.o
>  obj-$(CONFIG_DRM_DISPLAY_CONNECTOR) += display-connector.o
>  obj-$(CONFIG_DRM_LVDS_CODEC) += lvds-codec.o
> diff --git a/drivers/gpu/drm/bridge/cdns-mhdp-core.c b/drivers/gpu/drm/bridge/cdns-mhdp-core.c
> index d47187ab358b..53c25f6ecddf 100644
> --- a/drivers/gpu/drm/bridge/cdns-mhdp-core.c
> +++ b/drivers/gpu/drm/bridge/cdns-mhdp-core.c
> @@ -42,6 +42,8 @@
>  
>  #include "cdns-mhdp-core.h"
>  
> +#include "cdns-mhdp-j721e.h"
> +
>  static DECLARE_WAIT_QUEUE_HEAD(fw_load_wq);
>  
>  static int cdns_mhdp_mailbox_read(struct cdns_mhdp_device *mhdp)
> @@ -1702,6 +1704,16 @@ static int cdns_mhdp_connector_init(struct cdns_mhdp_device *mhdp)
>  
>  	conn->display_info.bus_flags = DRM_BUS_FLAG_DE_HIGH;
>  
> +	if (of_device_is_compatible(mhdp->dev->of_node, "ti,j721e-mhdp8546"))
> +	/*
> +	 * DP is internal to J7 SoC and we need to use DRIVE_POSEDGE
> +	 * in the display controller. This is achieved for the time being
> +	 * by defining SAMPLE_NEGEDGE here.
> +	 */

The indentation is wrong. You can adjust it or move it before the if (...).

> +		conn->display_info.bus_flags |=
> +					DRM_BUS_FLAG_PIXDATA_SAMPLE_NEGEDGE |
> +					DRM_BUS_FLAG_SYNC_SAMPLE_NEGEDGE;

This should be set in drm_bridge_timings.input_bus_flags instead, and
the tidss should use those when available instead of getting the value
from the connector.

> +
>  	ret = drm_connector_attach_encoder(conn, bridge->encoder);
>  	if (ret) {
>  		DRM_ERROR("Failed to attach connector to encoder\n");
> @@ -2521,6 +2533,9 @@ static int cdns_mhdp_remove(struct platform_device *pdev)
>  
>  static const struct of_device_id mhdp_ids[] = {
>  	{ .compatible = "cdns,mhdp8546", },
> +#ifdef CONFIG_DRM_CDNS_MHDP_J721E
> +	{ .compatible = "ti,j721e-mhdp8546", .data = &mhdp_ti_j721e_ops },
> +#endif
>  	{ /* sentinel */ }
>  };
>  MODULE_DEVICE_TABLE(of, mhdp_ids);
> diff --git a/drivers/gpu/drm/bridge/cdns-mhdp-core.h b/drivers/gpu/drm/bridge/cdns-mhdp-core.h
> index bd97a7aeb28b..d40a0f8615a4 100644
> --- a/drivers/gpu/drm/bridge/cdns-mhdp-core.h
> +++ b/drivers/gpu/drm/bridge/cdns-mhdp-core.h
> @@ -343,6 +343,7 @@ struct cdns_mhdp_bridge_state {
>  
>  struct cdns_mhdp_device {
>  	void __iomem *regs;
> +	void __iomem *j721e_regs;
>  
>  	struct device *dev;
>  	struct clk *clk;
> diff --git a/drivers/gpu/drm/bridge/cdns-mhdp-j721e.c b/drivers/gpu/drm/bridge/cdns-mhdp-j721e.c
> new file mode 100644
> index 000000000000..cc33c9afb5bb
> --- /dev/null
> +++ b/drivers/gpu/drm/bridge/cdns-mhdp-j721e.c
> @@ -0,0 +1,72 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * TI j721e Cadence MHDP DP wrapper
> + *
> + * Copyright (C) 2020 Texas Instruments Incorporated - http://www.ti.com/
> + * Author: Jyri Sarha <jsarha@...com

Missing >

> + */
> +
> +#include <linux/io.h>
> +#include <linux/platform_device.h>
> +
> +#include "cdns-mhdp-j721e.h"
> +
> +#define	REVISION			0x00
> +#define	DPTX_IPCFG			0x04
> +#define	ECC_MEM_CFG			0x08
> +#define	DPTX_DSC_CFG			0x0c
> +#define	DPTX_SRC_CFG			0x10
> +#define	DPTX_VIF_SECURE_MODE_CFG	0x14
> +#define	DPTX_VIF_CONN_STATUS		0x18
> +#define	PHY_CLK_STATUS			0x1c
> +
> +#define DPTX_SRC_AIF_EN			BIT(16)
> +#define DPTX_SRC_VIF_3_IN30B		BIT(11)
> +#define DPTX_SRC_VIF_2_IN30B		BIT(10)
> +#define DPTX_SRC_VIF_1_IN30B		BIT(9)
> +#define DPTX_SRC_VIF_0_IN30B		BIT(8)
> +#define DPTX_SRC_VIF_3_SEL_DPI5		BIT(7)
> +#define DPTX_SRC_VIF_3_SEL_DPI3		0
> +#define DPTX_SRC_VIF_2_SEL_DPI4		BIT(6)
> +#define DPTX_SRC_VIF_2_SEL_DPI2		0
> +#define DPTX_SRC_VIF_1_SEL_DPI3		BIT(5)
> +#define DPTX_SRC_VIF_1_SEL_DPI1		0
> +#define DPTX_SRC_VIF_0_SEL_DPI2		BIT(4)
> +#define DPTX_SRC_VIF_0_SEL_DPI0		0
> +#define DPTX_SRC_VIF_3_EN		BIT(3)
> +#define DPTX_SRC_VIF_2_EN		BIT(2)
> +#define DPTX_SRC_VIF_1_EN		BIT(1)
> +#define DPTX_SRC_VIF_0_EN		BIT(0)
> +
> +/* TODO turn DPTX_IPCFG fw_mem_clk_en at pm_runtime_suspend. */
> +
> +static int cdns_mhdp_j721e_init(struct cdns_mhdp_device *mhdp)
> +{
> +	struct platform_device *pdev = to_platform_device(mhdp->dev);
> +
> +	mhdp->j721e_regs = devm_platform_ioremap_resource(pdev, 1);
> +	return PTR_ERR_OR_ZERO(mhdp->j721e_regs);
> +}
> +
> +static void cdns_mhdp_j721e_enable(struct cdns_mhdp_device *mhdp)
> +{
> +	/*
> +	 * Eneble VIF_0 and select DPI2 as its input. DSS0 DPI0 is connected

s/Eneble/Enable/

> +	 * to eDP DPI2. This is the only supported SST configuration on
> +	 * J721E.
> +	 */
> +	writel(DPTX_SRC_VIF_0_EN | DPTX_SRC_VIF_0_SEL_DPI2,
> +	       mhdp->j721e_regs + DPTX_SRC_CFG);
> +}
> +
> +static void cdns_mhdp_j721e_disable(struct cdns_mhdp_device *mhdp)
> +{
> +	/* Put everything to defaults  */
> +	writel(0, mhdp->j721e_regs + DPTX_DSC_CFG);
> +}
> +
> +const struct mhdp_platform_ops mhdp_ti_j721e_ops = {
> +	.init = cdns_mhdp_j721e_init,
> +	.enable = cdns_mhdp_j721e_enable,
> +	.disable = cdns_mhdp_j721e_disable,
> +};
> diff --git a/drivers/gpu/drm/bridge/cdns-mhdp-j721e.h b/drivers/gpu/drm/bridge/cdns-mhdp-j721e.h
> new file mode 100644
> index 000000000000..7a4a1a269b5e
> --- /dev/null
> +++ b/drivers/gpu/drm/bridge/cdns-mhdp-j721e.h
> @@ -0,0 +1,19 @@
> +/* SPDX-License-Identifier: GPL-2.0 */
> +/*
> + * TI j721e Cadence MHDP DP wrapper
> + *
> + * Copyright (C) 2020 Texas Instruments Incorporated - http://www.ti.com/
> + * Author: Jyri Sarha <jsarha@...com

Missing >

> + */
> +
> +#ifndef CDNS_MHDP_J721E_H
> +#define CDNS_MHDP_J721E_H
> +
> +#include <linux/platform_device.h>
> +#include "cdns-mhdp-core.h"

I don't think you need any of those two headers.

> +
> +struct mhdp_platform_ops;
> +
> +extern const struct mhdp_platform_ops mhdp_ti_j721e_ops;
> +
> +#endif /* !CDNS_MHDP_J721E_H */

-- 
Regards,

Laurent Pinchart

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ