lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <20200812202018.49046-1-alcooperx@gmail.com>
Date:   Wed, 12 Aug 2020 16:20:15 -0400
From:   Al Cooper <alcooperx@...il.com>
To:     linux-kernel@...r.kernel.org
Cc:     Al Cooper <alcooperx@...il.com>,
        bcm-kernel-feedback-list@...adcom.com, devicetree@...r.kernel.org,
        Florian Fainelli <f.fainelli@...il.com>,
        Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
        linux-arm-kernel@...ts.infradead.org, linux-usb@...r.kernel.org,
        Rob Herring <robh+dt@...nel.org>
Subject: [PATCH 0/3] usb: Add driver for USB signal re-mapper

The Broadcom 7211 has new functionality that allows some USB low
speed side band signals, that go from the XHCI host controller to
pins on the chip, to be remapped to use any GPIO pin instead of the
limited set selectable by hardware. This can be done without changing
the standard driver for the host controller. There is currently
support for three USB signals, PWRON, VBUS_PRESENT and PWRFLT. This
driver will allow the remapping of any of these three signals based
on settings in the Device Tree node for the driver. The driver was
written so that it could handle additional signals added in the
future by just adding the correct properties to the DT node.

Al Cooper (3):
  dt-bindings: Add support for Broadcom USB pin map driver
  usb: Add driver to allow any GPIO to be used for 7211 USB signals
  usb: Add Kconfig and Makefile changes to build brcmstb-usb-pinmap

 .../bindings/usb/brcm,usb-pinmap.yaml         |  63 ++++
 MAINTAINERS                                   |   8 +
 drivers/usb/host/Kconfig                      |   4 +
 drivers/usb/host/Makefile                     |   1 +
 drivers/usb/host/brcmstb-usb-pinmap.c         | 348 ++++++++++++++++++
 5 files changed, 424 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/usb/brcm,usb-pinmap.yaml
 create mode 100644 drivers/usb/host/brcmstb-usb-pinmap.c

-- 
2.17.1

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ