| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20200813074908.889-6-tychang@realtek.com>
Date: Thu, 13 Aug 2020 15:49:04 +0800
From: TY Chang <tychang@...ltek.com>
To: <linux-realtek-soc@...ts.infradead.org>, <afaerber@...e.de>
CC: <linus.walleij@...aro.org>, <linux-gpio@...r.kernel.org>,
<robh+dt@...nel.org>, <devicetree@...r.kernel.org>,
<linux-kernel@...r.kernel.org>
Subject: [PATCH v3 5/9] dt-bindings: pinctrl: realtek: Add Realtek DHC SoC rtd1295
Add device tree binding Documentation for rtd1295
pinctrl driver.
Signed-off-by: TY Chang <tychang@...ltek.com>
---
.../pinctrl/realtek,rtd1295-pinctrl.yaml | 192 ++++++++++++++++++
1 file changed, 192 insertions(+)
create mode 100644 Documentation/devicetree/bindings/pinctrl/realtek,rtd1295-pinctrl.yaml
diff --git a/Documentation/devicetree/bindings/pinctrl/realtek,rtd1295-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/realtek,rtd1295-pinctrl.yaml
new file mode 100644
index 000000000000..20f612017f24
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/realtek,rtd1295-pinctrl.yaml
@@ -0,0 +1,192 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/realtek,rtd1295-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Realtek DHC RTD1295 pin control
+
+maintainers:
+ - Andreas Farber <afaerber@...e.de>
+
+properties:
+ compatible:
+ enum:
+ - realtek,rtd1295-iso-pinctrl
+ - realtek,rtd1295-sb2-pinctrl
+ - realtek,rtd1295-disp-pinctrl
+ - realtek,rtd1295-cr-pinctrl
+ reg:
+ maxItems: 1
+
+#PIN CONFIGURATION NODES
+patternProperties:
+ '(-pin|-pins)$':
+ type: object
+ description:
+ Pinctrl node's client devices use subnodes for desired pin configuration.
+ Client device subnodes use below standard properties.
+ allOf:
+ - $ref: "/schemas/pinctrl/pincfg-node.yaml"
+
+ properties:
+ pins:
+ items:
+ enum: [ iso_gpio_0, iso_gpio_1, iso_gpio_2, iso_gpio_3, iso_gpio_4,
+ iso_gpio_5, hdmi_hpd, iso_gpio_7, ir_rx, ir_tx, ur0_rx,
+ ur0_tx, ur1_rx, ur1_tx, ur1_cts_n, ur1_rts_n, i2c_scl_0,
+ i2c_sda_0, i2c_scl_1, i2c_sda_1, i2c_scl_6, iso_gpio_21,
+ iso_gpio_22, iso_gpio_23, iso_gpio_24, iso_gpio_25,
+ i2c_sda_6, etn_led_link, etn_led_rxtx, nat_led_0,
+ nat_led_1, nat_led_2, nat_led_3, iso_gpio_33,
+ iso_gpio_34, pwm_23_loc0, pwm_01_loc0, pwm_23_loc1,
+ pwm_01_loc1, ejtag_avcpu_loc, ur2_loc, i2c0, i2c1,
+ i2c6, uart0, uart1, uart2_0, uart2_1, gpio_0, gpio_1,
+ gpio_2, gpio_3, gpio_4, gpio_5, gpio_6, gpio_7, gpio_8,
+ gpio_9, tp1_sync, i2c_scl_4, i2c_sda_4, i2c_scl_5,
+ i2c_sda_5, usb_id, sensor_cko_0, sensor_cko_1, sensor_rst,
+ sensor_stb_0, sensor_stb_1, tp0_data, tp0_clk, tp0_valid,
+ tp0_sync, tp1_data, tp1_clk, tp1_valid, rgmii0_txc,
+ rgmii0_tx_ctl,rgmii0_txd_0, rgmii0_txd_1, rgmii0_txd_2,
+ rgmii0_txd_3, rgmii0_rxc, rgmii0_rx_ctl, rgmii0_rxd_0,
+ rgmii0_rxd_1, rgmii0_rxd_2, rgmii0_rxd_3, rgmii0_mdio,
+ rgmii0_mdc, rgmii1_txc, rgmii1_tx_ctl, rgmii1_txd_0,
+ rgmii1_txd_1, rgmii1_txd_2, rgmii1_txd_3, rgmii1_rxc,
+ rgmii1_rx_ctl, rgmii1_rxd_0, rgmii1_rxd_1, rgmii1_rxd_2,
+ rgmii1_rxd_3, hif_loc, ejtag_scpu_loc, sf_en, tp0_loc,
+ tp1_loc, spdif, dmic_clk, dmic_data, ao_lrck, ao_bck,
+ aock, ao_sd_0, ao_sd_1, ao_sd_2, ao_sd_3, nf_cle,
+ nf_ale, nf_rd_n, nf_wr_n, nf_rdy, nf_dd_7, nf_dd_6,
+ nf_dd_5, nf_dd_4, nf_dd_3, nf_dd_2, nf_dd_1, nf_dd_0,
+ nf_dqs, nf_ce_n_0, nf_ce_n_1, emmc_dd_sb, mmc_cmd,
+ mmc_clk, mmc_wp, mmc_cd, mmc_data_0, mmc_data_1,
+ mmc_data_2, mmc_data_3, sdio_cmd, sdio_clk, sdio_data_0,
+ sdio_data_1, sdio_data_2, sdio_data_3, pcie_clkreq_0,
+ pcie_clkreq_1, prob_0, prob_1, prob_2, prob_3, sdio_loc ]
+ minItems: 1
+
+ groups:
+ items:
+ enum: [ iso_gpio_0, iso_gpio_1, iso_gpio_2, iso_gpio_3, iso_gpio_4,
+ iso_gpio_5, hdmi_hpd, iso_gpio_7, ir_rx, ir_tx, ur0_rx,
+ ur0_tx, ur1_rx, ur1_tx, ur1_cts_n, ur1_rts_n, i2c_scl_0,
+ i2c_sda_0, i2c_scl_1, i2c_sda_1, i2c_scl_6, iso_gpio_21,
+ iso_gpio_22, iso_gpio_23, iso_gpio_24, iso_gpio_25,
+ i2c_sda_6, etn_led_link, etn_led_rxtx, nat_led_0,
+ nat_led_1, nat_led_2, nat_led_3, iso_gpio_33,
+ iso_gpio_34, pwm_23_loc0, pwm_01_loc0, pwm_23_loc1,
+ pwm_01_loc1, ejtag_avcpu_loc, ur2_loc, i2c0, i2c1,
+ i2c6, uart0, uart1, uart2_0, uart2_1, gpio_0, gpio_1,
+ gpio_2, gpio_3, gpio_4, gpio_5, gpio_6, gpio_7, gpio_8,
+ gpio_9, tp1_sync, i2c_scl_4, i2c_sda_4, i2c_scl_5,
+ i2c_sda_5, usb_id, sensor_cko_0, sensor_cko_1, sensor_rst,
+ sensor_stb_0, sensor_stb_1, tp0_data, tp0_clk, tp0_valid,
+ tp0_sync, tp1_data, tp1_clk, tp1_valid, rgmii0_txc,
+ rgmii0_tx_ctl,rgmii0_txd_0, rgmii0_txd_1, rgmii0_txd_2,
+ rgmii0_txd_3, rgmii0_rxc, rgmii0_rx_ctl, rgmii0_rxd_0,
+ rgmii0_rxd_1, rgmii0_rxd_2, rgmii0_rxd_3, rgmii0_mdio,
+ rgmii0_mdc, rgmii1_txc, rgmii1_tx_ctl, rgmii1_txd_0,
+ rgmii1_txd_1, rgmii1_txd_2, rgmii1_txd_3, rgmii1_rxc,
+ rgmii1_rx_ctl, rgmii1_rxd_0, rgmii1_rxd_1, rgmii1_rxd_2,
+ rgmii1_rxd_3, hif_loc, ejtag_scpu_loc, sf_en, tp0_loc,
+ tp1_loc, spdif, dmic_clk, dmic_data, ao_lrck, ao_bck,
+ aock, ao_sd_0, ao_sd_1, ao_sd_2, ao_sd_3, nf_cle,
+ nf_ale, nf_rd_n, nf_wr_n, nf_rdy, nf_dd_7, nf_dd_6,
+ nf_dd_5, nf_dd_4, nf_dd_3, nf_dd_2, nf_dd_1, nf_dd_0,
+ nf_dqs, nf_ce_n_0, nf_ce_n_1, emmc_dd_sb, mmc_cmd,
+ mmc_clk, mmc_wp, mmc_cd, mmc_data_0, mmc_data_1,
+ mmc_data_2, mmc_data_3, sdio_cmd, sdio_clk, sdio_data_0,
+ sdio_data_1, sdio_data_2, sdio_data_3, pcie_clkreq_0,
+ pcie_clkreq_1, prob_0, prob_1, prob_2, prob_3, sdio_loc ]
+ minItems: 1
+
+ function:
+ enum: [ gpio, acpu_ejtag_loc_iso, edp_hpd, etn_led, i2c0, i2c1, i2c6,
+ ir_rx, ir_tx, nat_led, pwm_0, pwm_1, rtc, sc, standby_dbg,
+ uart0, uart1, uart2_0, uart2_1, pwm_01_loc0_normal,
+ pwm_23_loc0_normal, pwm_01_loc0_open_drain, pwm_23_loc0_open_drain,
+ pwm_01_loc1_normal, pwm_23_loc1_normal, pwm_01_loc1_open_drain,
+ pwm_23_loc1_open_drain, acpu_ejtag_loc_nf, ai, dc_fan_sensor,
+ eth_gpy, gspi, i2c2, i2c3, i2c4, i2c5, nand, rgmii, scpu_ejtag_loc_gpio,
+ sensor_cko_output, spi, test_loop_dis, tp0_loc_rgmii0_tx, tp0_loc_tp0,
+ tp0_loc_tp1, tp1_loc_rgmii0_rx, tp1_loc_tp0, tp1_loc_tp1,
+ usb_clock_output, hif_loc_misc, hif_loc_nf, scpu_ejtag_loc_cr, ao,
+ dmic, spdif_out, avcpu_ej, emmc, hif, nand, p2s, pcie, pll_test,
+ scpu_ejtag_loc_cr, sd_card, sdio_0, sdio_1 ]
+
+ drive-strength:
+ enum: [2, 4, 8]
+
+ bias-pull-down: true
+
+ bias-pull-up: true
+
+ bias-disable: true
+
+ input-schmitt-disable: true
+
+ input-schmitt-enable: true
+
+ rtk,pdrive:
+ $ref: "/schemas/types.yaml#/definitions/uint32"
+ minimum: 0
+ maximum: 0xf
+ description:
+ For nand flash, emmc, sdio, sdmmc and emmc pins, there exists specific
+ driving setup. We can adjust the postive drive or negative drive individually.
+ "rtk,pdrive = <XXXX>" and "rtk,ndrive = <XXXX>" are used to describe the specific
+ driving setup property. XXXX means the value of E5E4E3E2. They are the driving capability
+ of the pins. "rtk,pdrive" use to adjust the positive drive; "rtk,ndrive" use to
+ adjust the negative drive.
+ E2, E3, E4 and E5 have different driving capability. There is also an EN which is always
+ enabled and has basic driving capability. The driving capability of the pin is the sum
+ of En, E2, E3, E4 and E5.
+ The driving capability is corresponded to the driving current. It should be noted that the
+ positive drive and the negative drive with the same driving capability value is corresponded
+ to different driving current.
+ The following is the pad driving mapping table.
+ EN E2 E3 E4 E5 driving_capability negative_drive(mA) positive_drive(mA)
+ 1 0.125 1.3 1.1
+ 1 0.125 1.3 1.1
+ 1 0.25 2.6 2.2
+ 1 0.5 5.2 4.4
+ 1 0.5 5.2 4.4
+ rtk,ndrive:
+ $ref: "/schemas/types.yaml#/definitions/uint32"
+ minimum: 0
+ maximum: 0xf
+ description:
+ It used to setup negative drive of nand flash, emmc, sdio or emmc pins. It has
+ been described in the description of the property "rtk,pdrive" above.
+
+ oneOf:
+ - required:
+ - pins
+ - required:
+ - groups
+
+ additionalProperties: false
+
+required:
+ - compatible
+ - reg
+
+additionalProperties: false
+
+examples:
+ - |
+ iso_pinctrl: pinctrl@300 {
+ compatible = "realtek,rtd1295-iso-pinctrl";
+ reg = <0x300 0x24>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&etn_led_pins>;
+
+ etn_led_pins: etn-led-pins {
+ function = "etn_led";
+ groups = "etn_led_link", "etn_led_rxtx";
+ bias-pull-up;
+ drive-strength = <4>;
+ };
+ };
+
--
2.28.0
Powered by blists - more mailing lists