lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Date:   Fri, 14 Aug 2020 15:11:38 +0800
From:   Xia Jiang <xia.jiang@...iatek.com>
To:     Hans Verkuil <hverkuil-cisco@...all.nl>,
        Mauro Carvalho Chehab <mchehab+samsung@...nel.org>,
        Rob Herring <robh+dt@...nel.org>,
        Matthias Brugger <matthias.bgg@...il.com>,
        Rick Chang <rick.chang@...iatek.com>
CC:     <linux-media@...r.kernel.org>, <devicetree@...r.kernel.org>,
        <linux-kernel@...r.kernel.org>,
        <linux-arm-kernel@...ts.infradead.org>,
        <linux-mediatek@...ts.infradead.org>,
        Marek Szyprowski <m.szyprowski@...sung.com>,
        Tomasz Figa <tfiga@...omium.org>,
        <srv_heupstream@...iatek.com>, <senozhatsky@...omium.org>,
        <mojahsu@...omium.org>, <drinkcat@...omium.org>,
        <maoguang.meng@...iatek.com>, Xia Jiang <xia.jiang@...iatek.com>
Subject: [PATCH v12 05/29] media: platform: Improve power on and power off flow

Call pm_runtime_get_sync() before starting a frame and then
pm_runtime_put() after completing it. This can save power for the time
between processing two frames.

Reviewed-by: Tomasz Figa <tfiga@...omium.org>
Signed-off-by: Xia Jiang <xia.jiang@...iatek.com>
---
v12: no changes
---
 .../media/platform/mtk-jpeg/mtk_jpeg_core.c   | 27 +++++--------------
 1 file changed, 6 insertions(+), 21 deletions(-)

diff --git a/drivers/media/platform/mtk-jpeg/mtk_jpeg_core.c b/drivers/media/platform/mtk-jpeg/mtk_jpeg_core.c
index 12609ca46fd9..fb624385969e 100644
--- a/drivers/media/platform/mtk-jpeg/mtk_jpeg_core.c
+++ b/drivers/media/platform/mtk-jpeg/mtk_jpeg_core.c
@@ -710,23 +710,6 @@ static struct vb2_v4l2_buffer *mtk_jpeg_buf_remove(struct mtk_jpeg_ctx *ctx,
 		return v4l2_m2m_dst_buf_remove(ctx->fh.m2m_ctx);
 }
 
-static int mtk_jpeg_start_streaming(struct vb2_queue *q, unsigned int count)
-{
-	struct mtk_jpeg_ctx *ctx = vb2_get_drv_priv(q);
-	struct vb2_v4l2_buffer *vb;
-	int ret = 0;
-
-	ret = pm_runtime_get_sync(ctx->jpeg->dev);
-	if (ret < 0)
-		goto err;
-
-	return 0;
-err:
-	while ((vb = mtk_jpeg_buf_remove(ctx, q->type)))
-		v4l2_m2m_buf_done(vb, VB2_BUF_STATE_QUEUED);
-	return ret;
-}
-
 static void mtk_jpeg_stop_streaming(struct vb2_queue *q)
 {
 	struct mtk_jpeg_ctx *ctx = vb2_get_drv_priv(q);
@@ -751,8 +734,6 @@ static void mtk_jpeg_stop_streaming(struct vb2_queue *q)
 
 	while ((vb = mtk_jpeg_buf_remove(ctx, q->type)))
 		v4l2_m2m_buf_done(vb, VB2_BUF_STATE_ERROR);
-
-	pm_runtime_put_sync(ctx->jpeg->dev);
 }
 
 static const struct vb2_ops mtk_jpeg_qops = {
@@ -761,7 +742,6 @@ static const struct vb2_ops mtk_jpeg_qops = {
 	.buf_queue          = mtk_jpeg_buf_queue,
 	.wait_prepare       = vb2_ops_wait_prepare,
 	.wait_finish        = vb2_ops_wait_finish,
-	.start_streaming    = mtk_jpeg_start_streaming,
 	.stop_streaming     = mtk_jpeg_stop_streaming,
 };
 
@@ -812,7 +792,7 @@ static void mtk_jpeg_device_run(void *priv)
 	struct mtk_jpeg_src_buf *jpeg_src_buf;
 	struct mtk_jpeg_bs bs;
 	struct mtk_jpeg_fb fb;
-	int i;
+	int i, ret;
 
 	src_buf = v4l2_m2m_next_src_buf(ctx->fh.m2m_ctx);
 	dst_buf = v4l2_m2m_next_dst_buf(ctx->fh.m2m_ctx);
@@ -832,6 +812,10 @@ static void mtk_jpeg_device_run(void *priv)
 		return;
 	}
 
+	ret = pm_runtime_get_sync(jpeg->dev);
+	if (ret < 0)
+		goto dec_end;
+
 	mtk_jpeg_set_dec_src(ctx, &src_buf->vb2_buf, &bs);
 	if (mtk_jpeg_set_dec_dst(ctx, &jpeg_src_buf->dec_param, &dst_buf->vb2_buf, &fb))
 		goto dec_end;
@@ -957,6 +941,7 @@ static irqreturn_t mtk_jpeg_dec_irq(int irq, void *priv)
 	v4l2_m2m_buf_done(src_buf, buf_state);
 	v4l2_m2m_buf_done(dst_buf, buf_state);
 	v4l2_m2m_job_finish(jpeg->m2m_dev, ctx->fh.m2m_ctx);
+	pm_runtime_put(ctx->jpeg->dev);
 	return IRQ_HANDLED;
 }
 
-- 
2.18.0

Powered by blists - more mailing lists