| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Fri, 14 Aug 2020 15:41:16 +0200
From: Ansuel Smith <ansuelsmth@...il.com>
To: Amit Kucheria <amit.kucheria@...aro.org>
Cc: Ansuel Smith <ansuelsmth@...il.com>,
Andy Gross <agross@...nel.org>,
Bjorn Andersson <bjorn.andersson@...aro.org>,
Amit Kucheria <amitk@...nel.org>,
Zhang Rui <rui.zhang@...el.com>,
Daniel Lezcano <daniel.lezcano@...aro.org>,
Rob Herring <robh+dt@...nel.org>,
linux-arm-msm@...r.kernel.org, linux-pm@...r.kernel.org,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: [RFC PATCH v6 2/8] drivers: thermal: tsens: Add VER_0 tsens version
VER_0 is used to describe device based on tsens version before v0.1.
These device are devices based on msm8960 for example apq8064 or
ipq806x.
Signed-off-by: Ansuel Smith <ansuelsmth@...il.com>
---
drivers/thermal/qcom/tsens.c | 122 +++++++++++++++++++++++++++++++----
drivers/thermal/qcom/tsens.h | 7 +-
2 files changed, 114 insertions(+), 15 deletions(-)
diff --git a/drivers/thermal/qcom/tsens.c b/drivers/thermal/qcom/tsens.c
index 9fe9a2b26705..965c4799918a 100644
--- a/drivers/thermal/qcom/tsens.c
+++ b/drivers/thermal/qcom/tsens.c
@@ -516,6 +516,15 @@ static irqreturn_t tsens_irq_thread(int irq, void *data)
dev_dbg(priv->dev, "[%u] %s: no violation: %d\n",
hw_id, __func__, temp);
}
+
+ if (tsens_version(priv) < VER_0_1) {
+ /* Constraint: There is only 1 interrupt control register for all
+ * 11 temperature sensor. So monitoring more than 1 sensor based
+ * on interrupts will yield inconsistent result. To overcome this
+ * issue we will monitor only sensor 0 which is the master sensor.
+ */
+ break;
+ }
}
return IRQ_HANDLED;
@@ -531,6 +540,13 @@ static int tsens_set_trips(void *_sensor, int low, int high)
int high_val, low_val, cl_high, cl_low;
u32 hw_id = s->hw_id;
+ if (tsens_version(priv) < VER_0_1) {
+ /* Pre v0.1 IP had a single register for each type of interrupt
+ * and thresholds
+ */
+ hw_id = 0;
+ }
+
dev_dbg(dev, "[%u] %s: proposed thresholds: (%d:%d)\n",
hw_id, __func__, low, high);
@@ -584,18 +600,21 @@ int get_temp_tsens_valid(const struct tsens_sensor *s, int *temp)
u32 valid;
int ret;
- ret = regmap_field_read(priv->rf[valid_idx], &valid);
- if (ret)
- return ret;
- while (!valid) {
- /* Valid bit is 0 for 6 AHB clock cycles.
- * At 19.2MHz, 1 AHB clock is ~60ns.
- * We should enter this loop very, very rarely.
- */
- ndelay(400);
+ /* VER_0 doesn't have VALID bit */
+ if (tsens_version(priv) >= VER_0_1) {
ret = regmap_field_read(priv->rf[valid_idx], &valid);
if (ret)
return ret;
+ while (!valid) {
+ /* Valid bit is 0 for 6 AHB clock cycles.
+ * At 19.2MHz, 1 AHB clock is ~60ns.
+ * We should enter this loop very, very rarely.
+ */
+ ndelay(400);
+ ret = regmap_field_read(priv->rf[valid_idx], &valid);
+ if (ret)
+ return ret;
+ }
}
/* Valid bit is set, OK to read the temperature */
@@ -763,6 +782,10 @@ int __init init_common(struct tsens_priv *priv)
goto err_put_device;
}
+ /* VER_0 have only tm_map */
+ if (!priv->srot_map)
+ priv->srot_map = priv->tm_map;
+
if (tsens_version(priv) > VER_0_1) {
for (i = VER_MAJOR; i <= VER_STEP; i++) {
priv->rf[i] = devm_regmap_field_alloc(dev, priv->srot_map,
@@ -781,6 +804,10 @@ int __init init_common(struct tsens_priv *priv)
ret = PTR_ERR(priv->rf[TSENS_EN]);
goto err_put_device;
}
+ /* in VER_0 TSENS need to be explicitly enabled */
+ if (tsens_version(priv) == VER_0)
+ regmap_field_write(priv->rf[TSENS_EN], 1);
+
ret = regmap_field_read(priv->rf[TSENS_EN], &enabled);
if (ret)
goto err_put_device;
@@ -803,6 +830,61 @@ int __init init_common(struct tsens_priv *priv)
goto err_put_device;
}
+ priv->rf[TSENS_EN] = devm_regmap_field_alloc(dev, priv->tm_map,
+ priv->fields[TSENS_EN]);
+ if (IS_ERR(priv->rf[TSENS_EN])) {
+ ret = PTR_ERR(priv->rf[TSENS_EN]);
+ goto err_put_device;
+ }
+
+ priv->rf[TSENS_SW_RST] = devm_regmap_field_alloc(
+ dev, priv->tm_map, priv->fields[TSENS_EN]);
+ if (IS_ERR(priv->rf[TSENS_EN])) {
+ ret = PTR_ERR(priv->rf[TSENS_EN]);
+ goto err_put_device;
+ }
+
+ priv->rf[LOW_INT_CLEAR_0] = devm_regmap_field_alloc(
+ dev, priv->tm_map, priv->fields[LOW_INT_CLEAR_0]);
+ if (IS_ERR(priv->rf[LOW_INT_CLEAR_0])) {
+ ret = PTR_ERR(priv->rf[LOW_INT_CLEAR_0]);
+ goto err_put_device;
+ }
+
+ priv->rf[UP_INT_CLEAR_0] = devm_regmap_field_alloc(
+ dev, priv->tm_map, priv->fields[UP_INT_CLEAR_0]);
+ if (IS_ERR(priv->rf[UP_INT_CLEAR_0])) {
+ ret = PTR_ERR(priv->rf[UP_INT_CLEAR_0]);
+ goto err_put_device;
+ }
+
+ /* VER_0 require to set MIN and MAX THRESH */
+ if (tsens_version(priv) < VER_0_1) {
+ priv->rf[MIN_THRESH_0] = devm_regmap_field_alloc(
+ dev, priv->tm_map, priv->fields[MIN_THRESH_0]);
+ if (IS_ERR(priv->rf[MIN_THRESH_0])) {
+ ret = PTR_ERR(priv->rf[MIN_THRESH_0]);
+ goto err_put_device;
+ }
+
+ priv->rf[MAX_THRESH_0] = devm_regmap_field_alloc(
+ dev, priv->tm_map, priv->fields[MAX_THRESH_0]);
+ if (IS_ERR(priv->rf[MAX_THRESH_0])) {
+ ret = PTR_ERR(priv->rf[MAX_THRESH_0]);
+ goto err_put_device;
+ }
+
+ regmap_field_write(priv->rf[MIN_THRESH_0], 0);
+ regmap_field_write(priv->rf[MAX_THRESH_0], 120000);
+ }
+
+ priv->rf[TRDY] =
+ devm_regmap_field_alloc(dev, priv->tm_map, priv->fields[TRDY]);
+ if (IS_ERR(priv->rf[TRDY])) {
+ ret = PTR_ERR(priv->rf[TRDY]);
+ goto err_put_device;
+ }
+
/* This loop might need changes if enum regfield_ids is reordered */
for (j = LAST_TEMP_0; j <= UP_THRESH_15; j += 16) {
for (i = 0; i < priv->feat->max_sensors; i++) {
@@ -856,7 +938,11 @@ int __init init_common(struct tsens_priv *priv)
}
spin_lock_init(&priv->ul_lock);
- tsens_enable_irq(priv);
+
+ /* VER_0 interrupt doesn't need to be enabled */
+ if (tsens_version(priv) >= VER_0_1)
+ tsens_enable_irq(priv);
+
tsens_debug_init(op);
err_put_device:
@@ -952,10 +1038,18 @@ static int tsens_register_irq(struct tsens_priv *priv, char *irqname,
if (irq == -ENXIO)
ret = 0;
} else {
- ret = devm_request_threaded_irq(&pdev->dev, irq,
- NULL, thread_fn,
- IRQF_ONESHOT,
- dev_name(&pdev->dev), priv);
+ /* VER_0 interrupt is TRIGGER_RISING, VER_0_1 and up is ONESHOT */
+ if (tsens_version(priv) > VER_0)
+ ret = devm_request_threaded_irq(&pdev->dev, irq, NULL,
+ thread_fn, IRQF_ONESHOT,
+ dev_name(&pdev->dev),
+ priv);
+ else
+ ret = devm_request_threaded_irq(&pdev->dev, irq,
+ thread_fn, NULL,
+ IRQF_TRIGGER_RISING,
+ dev_name(&pdev->dev),
+ priv);
if (ret)
dev_err(&pdev->dev, "%s: failed to get irq\n",
__func__);
diff --git a/drivers/thermal/qcom/tsens.h b/drivers/thermal/qcom/tsens.h
index 59d01162c66a..f1120791737c 100644
--- a/drivers/thermal/qcom/tsens.h
+++ b/drivers/thermal/qcom/tsens.h
@@ -25,7 +25,8 @@ struct tsens_priv;
/* IP version numbers in ascending order */
enum tsens_ver {
- VER_0_1 = 0,
+ VER_0 = 0,
+ VER_0_1,
VER_1_X,
VER_2_X,
};
@@ -441,6 +442,10 @@ enum regfield_ids {
CRIT_THRESH_14,
CRIT_THRESH_15,
+ /* VER_0 MIN MAX THRESH */
+ MIN_THRESH_0,
+ MAX_THRESH_0,
+
/* WATCHDOG */
WDOG_BARK_STATUS,
WDOG_BARK_CLEAR,
--
2.27.0
Powered by blists - more mailing lists