[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20200815104651.GA1005928@ravnborg.org>
Date: Sat, 15 Aug 2020 12:46:51 +0200
From: Sam Ravnborg <sam@...nborg.org>
To: Guido Günther <agx@...xcpu.org>
Cc: Thierry Reding <thierry.reding@...il.com>,
David Airlie <airlied@...ux.ie>,
Daniel Vetter <daniel@...ll.ch>,
Rob Herring <robh+dt@...nel.org>,
Arnd Bergmann <arnd@...db.de>,
Linus Walleij <linus.walleij@...aro.org>,
Heiko Stuebner <heiko.stuebner@...obroma-systems.com>,
Daniel Palmer <daniel@...f.com>,
Lubomir Rintel <lkundrak@...sk>,
Mark Brown <broonie@...nel.org>,
Kuninori Morimoto <kuninori.morimoto.gx@...esas.com>,
allen <allen.chen@....com.tw>,
Mauro Carvalho Chehab <mchehab+huawei@...nel.org>,
"David S. Miller" <davem@...emloft.net>,
dri-devel@...ts.freedesktop.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org
Subject: Re: [PATCH 3/3] drm/panel: Add panel driver for the Mantix
MLAF057WE51-X DSI panel
On Sat, Aug 15, 2020 at 12:40:22PM +0200, Guido Günther wrote:
> Hi Sam,
> On Sat, Aug 15, 2020 at 12:02:30PM +0200, Sam Ravnborg wrote:
> > Hi Guido.
> >
> > > +static int mantix_probe(struct mipi_dsi_device *dsi)
> > > +{
> > > + struct device *dev = &dsi->dev;
> > > + struct mantix *ctx;
> > > + int ret;
> > > +
> > > + ctx = devm_kzalloc(dev, sizeof(*ctx), GFP_KERNEL);
> > > + if (!ctx)
> > > + return -ENOMEM;
> > > +
> > > + ctx->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_LOW);
> > > + if (IS_ERR(ctx->reset_gpio)) {
> > > + DRM_DEV_ERROR(dev, "cannot get reset gpio\n");
> > > + return PTR_ERR(ctx->reset_gpio);
> > > + }
> > > +
> > > + mipi_dsi_set_drvdata(dsi, ctx);
> > > + ctx->dev = dev;
> > > +
> > > + dsi->lanes = 4;
> > > + dsi->format = MIPI_DSI_FMT_RGB888;
> > > + dsi->mode_flags = MIPI_DSI_MODE_VIDEO |
> > > + MIPI_DSI_MODE_VIDEO_BURST | MIPI_DSI_MODE_VIDEO_SYNC_PULSE;
> > > +
> > > + ctx->avdd = devm_regulator_get(dev, "avdd");
> > > + if (IS_ERR(ctx->avdd)) {
> > > + ret = PTR_ERR(ctx->avdd);
> > > + if (ret != -EPROBE_DEFER)
> > > + DRM_DEV_ERROR(dev,
> > > + "Failed to request avdd regulator: %d\n",
> > > + ret);
> > > + return ret;
> > > + }
> >
> > Consider to use the recently added dev_err_probe() here and below.
> > Note: Not part of drm-misc-next yet - but hopefully after -rc1
> > when a backmerge is done.
>
> In fact I did decided against it since i was told that missing dev_* and
> DRM_* logging shouldn't be done. So is that o.k. nowadays?
s/missing/mixing/
I often request that logging is consistent - so I recognize the
argument.
For panel/* I have not made up my mind what I think is the best
approach. The DRM_DEV_* and DRM_* logging do not add much value.
So I have been tempted several times to convert all logging in
panel/ to dev_* and pr_* (when no struct device * is available).
That would also avoid that we mix up logging.
We have drm_* logging - but they require a valid drm_device * which we
do not have in the the panel drivers. So they are ruled out here.
Do you have any opinions/comments on this?
Sam
Powered by blists - more mailing lists