[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <CA+V-a8sjxL-rbYAti8Djj2ch2+Zf+88_wNjbZHzKVBB66aZJ0g@mail.gmail.com>
Date: Sat, 15 Aug 2020 11:34:33 +0100
From: "Lad, Prabhakar" <prabhakar.csengg@...il.com>
To: Jacopo Mondi <jacopo@...ndi.org>
Cc: Mauro Carvalho Chehab <mchehab@...nel.org>,
Rob Herring <robh+dt@...nel.org>,
Hans Verkuil <hverkuil-cisco@...all.nl>,
Kieran Bingham <kieran.bingham+renesas@...asonboard.com>,
Sakari Ailus <sakari.ailus@...ux.intel.com>,
linux-media <linux-media@...r.kernel.org>,
"open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS"
<devicetree@...r.kernel.org>, LKML <linux-kernel@...r.kernel.org>,
Biju Das <biju.das.jz@...renesas.com>,
Linux-Renesas <linux-renesas-soc@...r.kernel.org>,
Lad Prabhakar <prabhakar.mahadev-lad.rj@...renesas.com>
Subject: Re: [PATCH v2 1/3] dt-bindings: media: ov772x: Document endpoint properties
Hi Jacopo,
On Mon, Aug 3, 2020 at 12:39 PM Lad Prabhakar
<prabhakar.mahadev-lad.rj@...renesas.com> wrote:
>
> Document endpoint properties required for parallel interface
>
> Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@...renesas.com>
> ---
> .../devicetree/bindings/media/i2c/ov772x.txt | 16 ++++++++++++++++
> 1 file changed, 16 insertions(+)
>
I see you already have a patch for YAML conversion for OV772x binding
[1], if you plan to post a v2 would you be OK to pick these changes as
part of your conversion changes ?
[1] https://www.spinics.net/lists/linux-media/msg173201.html
Cheers,
Prabhakar
> diff --git a/Documentation/devicetree/bindings/media/i2c/ov772x.txt b/Documentation/devicetree/bindings/media/i2c/ov772x.txt
> index 0b3ede5b8e6a..1f4153484717 100644
> --- a/Documentation/devicetree/bindings/media/i2c/ov772x.txt
> +++ b/Documentation/devicetree/bindings/media/i2c/ov772x.txt
> @@ -21,6 +21,22 @@ subnode for its digital output video port, in accordance with the video
> interface bindings defined in Documentation/devicetree/bindings/media/
> video-interfaces.txt.
>
> +Endpoint node required properties for parallel connection are:
> +- remote-endpoint: a phandle to the bus receiver's endpoint node.
> +- bus-width: shall be set to <8> for 8 bits parallel bus
> + or <10> for 10 bits parallel bus
> +- data-shift: shall be set to <2> for 8 bits parallel bus
> + (lines 9:2 are used) or <0> for 10 bits parallel bus
> +- hsync-active: active state of the HSYNC signal, 0/1 for LOW/HIGH respectively.
> + (Not required for bus-type equal 6)
> +- vsync-active: active state of the VSYNC signal, 0/1 for LOW/HIGH respectively.
> + (Not required for bus-type equal 6)
> +- pclk-sample: sample data on rising (1) or falling (0) edge of the pixel clock
> + signal. (Not required for bus-type equal 6)
> +- bus-type: data bus type. Possible values are:
> + 5 - Parallel
> + 6 - Bt.656
> +
> Example:
>
> &i2c0 {
> --
> 2.17.1
>
Powered by blists - more mailing lists