| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1597648720-13649-3-git-send-email-kathirav@codeaurora.org>
Date: Mon, 17 Aug 2020 12:48:40 +0530
From: Kathiravan T <kathirav@...eaurora.org>
To: agross@...nel.org, bjorn.andersson@...aro.org,
linux-arm-msm@...r.kernel.org, linux-kernel@...r.kernel.org,
robh+dt@...nel.org, sivaprak@...eaurora.org,
devicetree@...r.kernel.org
Cc: kathirav@...eaurora.org
Subject: [PATCH V2 2/2] arm64: dts: ipq6018: enable DVFS support
Add A53 PLL, APCS clock, RPM Glink, RPM message RAM, cpu-opp-table,
SMPA2 regulator to enable the cpu frequency on IPQ6018.
Co-developed-by: Sivaprakash Murugesan <sivaprak@...eaurora.org>
Signed-off-by: Sivaprakash Murugesan <sivaprak@...eaurora.org>
Signed-off-by: Kathiravan T <kathirav@...eaurora.org>
---
arch/arm64/boot/dts/qcom/ipq6018.dtsi | 96 +++++++++++++++++++++++++++++++++--
1 file changed, 93 insertions(+), 3 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/ipq6018.dtsi b/arch/arm64/boot/dts/qcom/ipq6018.dtsi
index 1aa8d8579463..a94dac76bf3f 100644
--- a/arch/arm64/boot/dts/qcom/ipq6018.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq6018.dtsi
@@ -8,6 +8,7 @@
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/clock/qcom,gcc-ipq6018.h>
#include <dt-bindings/reset/qcom,gcc-ipq6018.h>
+#include <dt-bindings/clock/qcom,apss-ipq.h>
/ {
#address-cells = <2>;
@@ -38,6 +39,10 @@
reg = <0x0>;
enable-method = "psci";
next-level-cache = <&L2_0>;
+ clocks = <&apcs_glb APCS_ALIAS0_CORE_CLK>;
+ clock-names = "cpu";
+ operating-points-v2 = <&cpu_opp_table>;
+ cpu-supply = <&ipq6018_s2>;
};
CPU1: cpu@1 {
@@ -46,6 +51,10 @@
enable-method = "psci";
reg = <0x1>;
next-level-cache = <&L2_0>;
+ clocks = <&apcs_glb APCS_ALIAS0_CORE_CLK>;
+ clock-names = "cpu";
+ operating-points-v2 = <&cpu_opp_table>;
+ cpu-supply = <&ipq6018_s2>;
};
CPU2: cpu@2 {
@@ -54,6 +63,10 @@
enable-method = "psci";
reg = <0x2>;
next-level-cache = <&L2_0>;
+ clocks = <&apcs_glb APCS_ALIAS0_CORE_CLK>;
+ clock-names = "cpu";
+ operating-points-v2 = <&cpu_opp_table>;
+ cpu-supply = <&ipq6018_s2>;
};
CPU3: cpu@3 {
@@ -62,6 +75,10 @@
enable-method = "psci";
reg = <0x3>;
next-level-cache = <&L2_0>;
+ clocks = <&apcs_glb APCS_ALIAS0_CORE_CLK>;
+ clock-names = "cpu";
+ operating-points-v2 = <&cpu_opp_table>;
+ cpu-supply = <&ipq6018_s2>;
};
L2_0: l2-cache {
@@ -70,6 +87,42 @@
};
};
+ cpu_opp_table: cpu_opp_table {
+ compatible = "operating-points-v2";
+ opp-shared;
+
+ opp-864000000 {
+ opp-hz = /bits/ 64 <864000000>;
+ opp-microvolt = <725000>;
+ clock-latency-ns = <200000>;
+ };
+ opp-1056000000 {
+ opp-hz = /bits/ 64 <1056000000>;
+ opp-microvolt = <787500>;
+ clock-latency-ns = <200000>;
+ };
+ opp-1320000000 {
+ opp-hz = /bits/ 64 <1320000000>;
+ opp-microvolt = <862500>;
+ clock-latency-ns = <200000>;
+ };
+ opp-1440000000 {
+ opp-hz = /bits/ 64 <1440000000>;
+ opp-microvolt = <925000>;
+ clock-latency-ns = <200000>;
+ };
+ opp-1608000000 {
+ opp-hz = /bits/ 64 <1608000000>;
+ opp-microvolt = <987500>;
+ clock-latency-ns = <200000>;
+ };
+ opp-1800000000 {
+ opp-hz = /bits/ 64 <1800000000>;
+ opp-microvolt = <1062500>;
+ clock-latency-ns = <200000>;
+ };
+ };
+
firmware {
scm {
compatible = "qcom,scm";
@@ -98,6 +151,11 @@
#size-cells = <2>;
ranges;
+ rpm_msg_ram: memory@...0000 {
+ reg = <0x0 0x60000 0x0 0x6000>;
+ no-map;
+ };
+
tz: tz@...00000 {
reg = <0x0 0x48500000 0x0 0x00200000>;
no-map;
@@ -294,12 +352,22 @@
};
apcs_glb: mailbox@...1000 {
- compatible = "qcom,ipq8074-apcs-apps-global";
- reg = <0x0b111000 0xc>;
-
+ compatible = "qcom,ipq6018-apcs-apps-global";
+ reg = <0x0b111000 0x1000>;
+ #clock-cells = <1>;
+ clocks = <&a53pll>, <&xo>;
+ clock-names = "pll", "xo";
#mbox-cells = <1>;
};
+ a53pll: clock@...6000 {
+ compatible = "qcom,ipq6018-a53pll";
+ reg = <0x0b116000 0x40>;
+ #clock-cells = <0>;
+ clocks = <&xo>;
+ clock-names = "xo";
+ };
+
timer {
compatible = "arm,armv8-timer";
interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
@@ -440,4 +508,26 @@
#interrupt-cells = <2>;
};
};
+
+ rpm-glink {
+ compatible = "qcom,glink-rpm";
+ interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
+ qcom,rpm-msg-ram = <&rpm_msg_ram>;
+ mboxes = <&apcs_glb 0>;
+
+ rpm_requests: glink-channel {
+ compatible = "qcom,rpm-ipq6018";
+ qcom,glink-channels = "rpm_requests";
+
+ regulators {
+ compatible = "qcom,rpm-mp5496-regulators";
+
+ ipq6018_s2: s2 {
+ regulator-min-microvolt = <725000>;
+ regulator-max-microvolt = <1062500>;
+ regulator-always-on;
+ };
+ };
+ };
+ };
};
--
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation
Powered by blists - more mailing lists