[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20200817143834.677465860@linuxfoundation.org>
Date: Mon, 17 Aug 2020 17:09:32 +0200
From: Greg Kroah-Hartman <gregkh@...uxfoundation.org>
To: linux-kernel@...r.kernel.org
Cc: Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
stable@...r.kernel.org,
Srinivas Kandagatla <srinivas.kandagatla@...aro.org>,
Stephan Gerhold <stephan@...hold.net>,
Bjorn Andersson <bjorn.andersson@...aro.org>,
Sasha Levin <sashal@...nel.org>
Subject: [PATCH 5.8 019/464] arm64: dts: qcom: msm8916: Replace invalid bias-pull-none property
From: Stephan Gerhold <stephan@...hold.net>
[ Upstream commit 1b6a1a162defe649c5599d661b58ac64bb6f31b6 ]
msm8916-pins.dtsi specifies "bias-pull-none" for most of the audio
pin configurations. This was likely copied from the qcom kernel fork
where the same property was used for these audio pins.
However, "bias-pull-none" actually does not exist at all - not in
mainline and not in downstream. I can only guess that the original
intention was to configure "no pull", i.e. bias-disable.
Change it to that instead.
Fixes: 143bb9ad85b7 ("arm64: dts: qcom: add audio pinctrls")
Cc: Srinivas Kandagatla <srinivas.kandagatla@...aro.org>
Signed-off-by: Stephan Gerhold <stephan@...hold.net>
Link: https://lore.kernel.org/r/20200605185916.318494-2-stephan@gerhold.net
Signed-off-by: Bjorn Andersson <bjorn.andersson@...aro.org>
Signed-off-by: Sasha Levin <sashal@...nel.org>
---
arch/arm64/boot/dts/qcom/msm8916-pins.dtsi | 10 +++++-----
1 file changed, 5 insertions(+), 5 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/msm8916-pins.dtsi b/arch/arm64/boot/dts/qcom/msm8916-pins.dtsi
index e9c00367f7fd0..5785bf0a807ce 100644
--- a/arch/arm64/boot/dts/qcom/msm8916-pins.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8916-pins.dtsi
@@ -556,7 +556,7 @@ pinconf {
pins = "gpio63", "gpio64", "gpio65", "gpio66",
"gpio67", "gpio68";
drive-strength = <8>;
- bias-pull-none;
+ bias-disable;
};
};
cdc_pdm_lines_sus: pdm-lines-off {
@@ -585,7 +585,7 @@ pinconf {
pins = "gpio113", "gpio114", "gpio115",
"gpio116";
drive-strength = <8>;
- bias-pull-none;
+ bias-disable;
};
};
@@ -613,7 +613,7 @@ pinmux {
pinconf {
pins = "gpio110";
drive-strength = <8>;
- bias-pull-none;
+ bias-disable;
};
};
@@ -639,7 +639,7 @@ pinmux {
pinconf {
pins = "gpio116";
drive-strength = <8>;
- bias-pull-none;
+ bias-disable;
};
};
ext_mclk_tlmm_lines_sus: mclk-lines-off {
@@ -667,7 +667,7 @@ pinconf {
pins = "gpio112", "gpio117", "gpio118",
"gpio119";
drive-strength = <8>;
- bias-pull-none;
+ bias-disable;
};
};
ext_sec_tlmm_lines_sus: tlmm-lines-off {
--
2.25.1
Powered by blists - more mailing lists