| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1597721685-9280-4-git-send-email-Anson.Huang@nxp.com>
Date: Tue, 18 Aug 2020 11:34:44 +0800
From: Anson Huang <Anson.Huang@....com>
To: mturquette@...libre.com, sboyd@...nel.org, robh+dt@...nel.org,
shawnguo@...nel.org, s.hauer@...gutronix.de, kernel@...gutronix.de,
festevam@...il.com, gregkh@...uxfoundation.org,
fugang.duan@....com, linux-clk@...r.kernel.org,
devicetree@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
linux-kernel@...r.kernel.org, linux-serial@...r.kernel.org
Cc: Linux-imx@....com
Subject: [PATCH V3 4/5] dt-bindings: serial: Convert MXS auart to json-schema
Convert the MXS auart binding to DT schema format using json-schema.
Signed-off-by: Anson Huang <Anson.Huang@....com>
---
changes since V2:
- update maintainer.
---
.../devicetree/bindings/serial/fsl-mxs-auart.txt | 53 -------------
.../devicetree/bindings/serial/fsl-mxs-auart.yaml | 91 ++++++++++++++++++++++
2 files changed, 91 insertions(+), 53 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/serial/fsl-mxs-auart.txt
create mode 100644 Documentation/devicetree/bindings/serial/fsl-mxs-auart.yaml
diff --git a/Documentation/devicetree/bindings/serial/fsl-mxs-auart.txt b/Documentation/devicetree/bindings/serial/fsl-mxs-auart.txt
deleted file mode 100644
index 5c96d41..0000000
--- a/Documentation/devicetree/bindings/serial/fsl-mxs-auart.txt
+++ /dev/null
@@ -1,53 +0,0 @@
-* Freescale MXS Application UART (AUART)
-
-Required properties for all SoCs:
-- compatible : Should be one of fallowing variants:
- "fsl,imx23-auart" - Freescale i.MX23
- "fsl,imx28-auart" - Freescale i.MX28
- "alphascale,asm9260-auart" - Alphascale ASM9260
-- reg : Address and length of the register set for the device
-- interrupts : Should contain the auart interrupt numbers
-- dmas: DMA specifier, consisting of a phandle to DMA controller node
- and AUART DMA channel ID.
- Refer to dma.txt and fsl-mxs-dma.txt for details.
-- dma-names: "rx" for RX channel, "tx" for TX channel.
-
-Required properties for "alphascale,asm9260-auart":
-- clocks : the clocks feeding the watchdog timer. See clock-bindings.txt
-- clock-names : should be set to
- "mod" - source for tick counter.
- "ahb" - ahb gate.
-
-Optional properties:
-- uart-has-rtscts : Indicate the UART has RTS and CTS lines
- for hardware flow control,
- it also means you enable the DMA support for this UART.
-- {rts,cts,dtr,dsr,rng,dcd}-gpios: specify a GPIO for RTS/CTS/DTR/DSR/RI/DCD
- line respectively. It will use specified PIO instead of the peripheral
- function pin for the USART feature.
- If unsure, don't specify this property.
-
-Example:
-auart0: serial@...6a000 {
- compatible = "fsl,imx28-auart", "fsl,imx23-auart";
- reg = <0x8006a000 0x2000>;
- interrupts = <112>;
- dmas = <&dma_apbx 8>, <&dma_apbx 9>;
- dma-names = "rx", "tx";
- cts-gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
- dsr-gpios = <&gpio1 16 GPIO_ACTIVE_LOW>;
- dcd-gpios = <&gpio1 17 GPIO_ACTIVE_LOW>;
-};
-
-Note: Each auart port should have an alias correctly numbered in "aliases"
-node.
-
-Example:
-
-aliases {
- serial0 = &auart0;
- serial1 = &auart1;
- serial2 = &auart2;
- serial3 = &auart3;
- serial4 = &auart4;
-};
diff --git a/Documentation/devicetree/bindings/serial/fsl-mxs-auart.yaml b/Documentation/devicetree/bindings/serial/fsl-mxs-auart.yaml
new file mode 100644
index 0000000..ce1d894
--- /dev/null
+++ b/Documentation/devicetree/bindings/serial/fsl-mxs-auart.yaml
@@ -0,0 +1,91 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/serial/fsl-mxs-auart.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale MXS Application UART (AUART)
+
+maintainers:
+ - Fabio Estevam <fabio.estevam@....com>
+
+allOf:
+ - $ref: "serial.yaml"
+
+properties:
+ compatible:
+ enum:
+ - fsl,imx23-auart
+ - fsl,imx28-auart
+ - alphascale,asm9260-auart
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ dmas:
+ items:
+ - description: DMA controller phandle and request line for RX
+ - description: DMA controller phandle and request line for TX
+
+ dma-names:
+ items:
+ - const: rx
+ - const: tx
+
+ clocks:
+ items:
+ - description: mod clock
+ - description: ahb clock
+ minItems: 1
+
+ clock-names:
+ items:
+ - const: mod
+ - const: ahb
+ minItems: 1
+
+ uart-has-rtscts: true
+ rts-gpios: true
+ cts-gpios: true
+ dtr-gpios: true
+ dsr-gpios: true
+ rng-gpios: true
+ dcd-gpios: true
+
+if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - alphascale,asm9260-auart
+then:
+ required:
+ - clocks
+ - clock-names
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - dmas
+ - dma-names
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ aliases {
+ serial0 = &auart0;
+ };
+
+ auart0: serial@...6a000 {
+ compatible = "fsl,imx28-auart";
+ reg = <0x8006a000 0x2000>;
+ interrupts = <112>;
+ dmas = <&dma_apbx 8>, <&dma_apbx 9>;
+ dma-names = "rx", "tx";
+ clocks = <&clks 45>;
+ };
--
2.7.4
Powered by blists - more mailing lists