| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20200818131024.6918c5ca@coco.lan>
Date: Tue, 18 Aug 2020 13:10:24 +0200
From: Mauro Carvalho Chehab <mchehab+huawei@...nel.org>
To: Rob Herring <robh+dt@...nel.org>
Cc: Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
linuxarm@...wei.com, mauro.chehab@...wei.com,
Lee Jones <lee.jones@...aro.org>,
Stephen Boyd <sboyd@...nel.org>, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, linux-arm-msm@...r.kernel.org
Subject: [PATCH v3.1 43/44] dt: document HiSilicon SPMI controller and
mfd/regulator properties
From e464ec2c38c083403b556e60f189ee8ae2f2c9c6 Mon Sep 17 00:00:00 2001
From: Mauro Carvalho Chehab <mchehab+huawei@...nel.org>
Date: Fri, 31 Jul 2020 09:46:02 +0200
Subject: [PATCH] dt: document HiSilicon SPMI controller and mfd/regulator
properties
Add documentation for the properties needed by the HiSilicon
6421v600 driver, and by the SPMI controller used to access
the chipset.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@...nel.org>
---
v3.1:
- Changed the DT properties to better match upstream requirements
PS.: I opted to submit just this patch, instead of the entire
series, in order to avoid flooding people's ML.
I'll be posting the full series again after DT specs match
upstream requirements.
diff --git a/Documentation/devicetree/bindings/mfd/hisilicon,hi6421-spmi-pmic.yaml b/Documentation/devicetree/bindings/mfd/hisilicon,hi6421-spmi-pmic.yaml
new file mode 100644
index 000000000000..881bbd83df65
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/hisilicon,hi6421-spmi-pmic.yaml
@@ -0,0 +1,159 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/hisilicon,hi6421-spmi-pmic.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: HiSilicon 6421v600 SPMI PMIC
+
+maintainers:
+ - Mauro Carvalho Chehab <mchehab+huawei@...nel.org>
+
+description: |
+ HiSilicon 6421v600 should be connected inside a MIPI System Power Management
+ (SPMI) bus. It provides interrupts and power supply.
+
+ The GPIO and interrupt settings are represented as part of the top-level PMIC
+ node.
+
+ The SPMI controller part is provided by
+ Documentation/devicetree/bindings/spmi/hisilicon,hisi-spmi-controller.yaml.
+
+properties:
+ $nodename:
+ pattern: "pmic@[0-9a-f]"
+
+ compatible:
+ const: hisilicon,hi6421v600-spmi
+
+ reg:
+ maxItems: 1
+
+ '#interrupt-cells':
+ const: 2
+
+ interrupt-controller:
+ description:
+ Identify that the PMIC is capable of behaving as an interrupt controller.
+
+ gpios:
+ maxItems: 1
+
+ regulators:
+ type: object
+
+ properties:
+ '#address-cells':
+ const: 1
+
+ '#size-cells':
+ const: 0
+
+ patternProperties:
+ '^ldo[0-9]+@[0-9a-f]$':
+ type: object
+
+ $ref: "/schemas/regulator/regulator.yaml#"
+
+ properties:
+ reg:
+ description: Enable register.
+
+ '#address-cells':
+ const: 1
+
+ '#size-cells':
+ const: 0
+
+ vsel-reg:
+ description: Voltage selector register.
+
+ enable-mask:
+ description: Bitmask used to enable the regulator.
+
+ voltage-table:
+ description: Table with the selector items for the voltage regulator.
+ minItems: 2
+ maxItems: 16
+
+ off-on-delay-us:
+ description: Time required for changing state to enabled in microseconds.
+
+ startup-delay-us:
+ description: Startup time in microseconds.
+
+ idle-mode-mask:
+ description: Bitmask used to put the regulator on idle mode.
+
+ eco-microamp:
+ description: Maximum current while on idle mode.
+
+ required:
+ - reg
+ - vsel-reg
+ - enable-mask
+ - voltage-table
+ - off-on-delay-us
+ - startup-delay-us
+
+required:
+ - compatible
+ - reg
+ - regulators
+
+examples:
+ - |
+ /* pmic properties */
+
+ pmic: pmic@0 {
+ compatible = "hisilicon,hi6421-spmi";
+ reg = <0 0>;
+
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ gpios = <&gpio28 0 0>;
+
+ regulators {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ldo3: ldo3@16 {
+ reg = <0x16>;
+ vsel-reg = <0x51>;
+
+ regulator-name = "ldo3";
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <2000000>;
+ regulator-boot-on;
+
+ enable-mask = <0x01>;
+
+ voltage-table = <1500000>, <1550000>, <1600000>, <1650000>,
+ <1700000>, <1725000>, <1750000>, <1775000>,
+ <1800000>, <1825000>, <1850000>, <1875000>,
+ <1900000>, <1925000>, <1950000>, <2000000>;
+ off-on-delay-us = <20000>;
+ startup-delay-us = <120>;
+ };
+
+ ldo4: ldo4@17 { /* 40 PIN */
+ reg = <0x17>;
+ vsel-reg = <0x52>;
+
+ regulator-name = "ldo4";
+ regulator-min-microvolt = <1725000>;
+ regulator-max-microvolt = <1900000>;
+ regulator-boot-on;
+
+ enable-mask = <0x01>;
+ idle-mode-mask = <0x10>;
+ eco-microamp = <10000>;
+
+ hi6421-vsel = <0x52 0x07>;
+ voltage-table = <1725000>, <1750000>, <1775000>, <1800000>,
+ <1825000>, <1850000>, <1875000>, <1900000>;
+ off-on-delay-us = <20000>;
+ startup-delay-us = <120>;
+ };
+ };
+ };
diff --git a/Documentation/devicetree/bindings/spmi/hisilicon,hisi-spmi-controller.yaml b/Documentation/devicetree/bindings/spmi/hisilicon,hisi-spmi-controller.yaml
new file mode 100644
index 000000000000..b1cfa9c3aca6
--- /dev/null
+++ b/Documentation/devicetree/bindings/spmi/hisilicon,hisi-spmi-controller.yaml
@@ -0,0 +1,62 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/spmi/hisilicon,hisi-spmi-controller.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: HiSilicon SPMI controller
+
+maintainers:
+ - Mauro Carvalho Chehab <mchehab+huawei@...nel.org>
+
+description: |
+ The HiSilicon SPMI BUS controller is found on some Kirin-based designs.
+ It is a MIPI System Power Management (SPMI) controller.
+
+ The PMIC part is provided by
+ Documentation/devicetree/bindings/mfd/hisilicon,hi6421-spmi-pmic.yaml.
+
+properties:
+ $nodename:
+ pattern: "spmi@[0-9a-f]"
+
+ compatible:
+ const: hisilicon,kirin970-spmi-controller
+
+ reg:
+ maxItems: 1
+
+ spmi-channel:
+ description: |
+ number of the Kirin 970 SPMI channel where the SPMI devices are connected.
+
+required:
+ - compatible
+ - reg
+ - spmi-channel
+
+patternProperties:
+ "^pmic@[0-9a-f]$":
+ description: |
+ PMIC properties, which are specific to the used SPMI PMIC device(s).
+ When used in combination with HiSilicon 6421v600, the properties
+ are documented at
+ Documentation/devicetree/bindings/mfd/hisilicon,hi6421-spmi-pmic.yaml.
+
+examples:
+ - |
+ bus {
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ spmi: spmi@...24000 {
+ compatible = "hisilicon,kirin970-spmi-controller";
+ status = "ok";
+ reg = <0x0 0xfff24000 0x0 0x1000>;
+ spmi-channel = <2>;
+
+ pmic@0 {
+ /* pmic properties */
+ };
+ };
+ };
Powered by blists - more mailing lists