[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <dleftjlfia22ex.fsf%l.stelmach@samsung.com>
Date: Wed, 19 Aug 2020 15:25:26 +0200
From: Lukasz Stelmach <l.stelmach@...sung.com>
To: Krzysztof Kozlowski <krzk@...nel.org>
Cc: Kukjin Kim <kgene@...nel.org>, Andi Shyti <andi@...zian.org>,
Mark Brown <broonie@...nel.org>, linux-spi@...r.kernel.org,
linux-samsung-soc@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
m.szyprowski@...sung.com, b.zolnierkie@...sung.com
Subject: Re: [PATCH 5/8] spi: spi-s3c64xx: Fix doc comment for struct
s3c64xx_spi_driver_data
It was <2020-08-19 śro 14:37>, when Krzysztof Kozlowski wrote:
> On Wed, Aug 19, 2020 at 02:32:05PM +0200, Łukasz Stelmach wrote:
>> Signed-off-by: Łukasz Stelmach <l.stelmach@...sung.com>
>
> Hi,
>
> Missing commit msg - fix what exactly?
>
> You need to rebase your patch as most of these were already fixed by Lee
> Jones.
>
> However he did not remove the @rx_dmach and tx entries...
I will.
>> ---
>> drivers/spi/spi-s3c64xx.c | 10 ++++++----
>> 1 file changed, 6 insertions(+), 4 deletions(-)
>>
>> diff --git a/drivers/spi/spi-s3c64xx.c b/drivers/spi/spi-s3c64xx.c
>> index 6fe896f2be18..505789f91fdf 100644
>> --- a/drivers/spi/spi-s3c64xx.c
>> +++ b/drivers/spi/spi-s3c64xx.c
>> @@ -155,19 +155,21 @@ struct s3c64xx_spi_port_config {
>> * @clk: Pointer to the spi clock.
>> * @src_clk: Pointer to the clock used to generate SPI signals.
>> * @ioclk: Pointer to the i/o clock between master and slave
>> + * @pdev: Pointer to the SPI controller platform device
>> * @master: Pointer to the SPI Protocol master.
>> * @cntrlr_info: Platform specific data for the controller this driver manages.
>> * @lock: Controller specific lock.
>> * @state: Set of FLAGS to indicate status.
>> - * @rx_dmach: Controller's DMA channel for Rx.
>> - * @tx_dmach: Controller's DMA channel for Tx.
>> + * @rx_dma: Controller's DMA channel for Rx.
>> + * @tx_dma: Controller's DMA channel for Tx.
>> * @sfr_start: BUS address of SPI controller regs.
>> * @regs: Pointer to ioremap'ed controller registers.
>> - * @irq: interrupt
>> * @xfer_completion: To indicate completion of xfer task.
>> * @cur_mode: Stores the active configuration of the controller.
>> * @cur_bpw: Stores the active bits per word settings.
>> * @cur_speed: Stores the active xfer clock speed.
>> + * @port_conf: Pointer to the SPI port configuration
>> + * @port_id: SPI port ID number
>> */
>
>
--
Łukasz Stelmach
Samsung R&D Institute Poland
Samsung Electronics
Download attachment "signature.asc" of type "application/pgp-signature" (488 bytes)
Powered by blists - more mailing lists