| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Wed, 19 Aug 2020 15:43:44 +0200
From: Geert Uytterhoeven <geert+renesas@...der.be>
To: "David S . Miller" <davem@...emloft.net>,
Jakub Kicinski <kuba@...nel.org>,
Rob Herring <robh+dt@...nel.org>,
Sergei Shtylyov <sergei.shtylyov@...il.com>
Cc: Andrew Lunn <andrew@...n.ch>,
Oleksij Rempel <linux@...pel-privat.de>,
Philippe Schenker <philippe.schenker@...adex.com>,
Florian Fainelli <f.fainelli@...il.com>,
Heiner Kallweit <hkallweit1@...il.com>,
Dan Murphy <dmurphy@...com>,
Kazuya Mizuguchi <kazuya.mizuguchi.ks@...esas.com>,
Wolfram Sang <wsa+renesas@...g-engineering.com>,
Magnus Damm <magnus.damm@...il.com>, netdev@...r.kernel.org,
devicetree@...r.kernel.org, linux-renesas-soc@...r.kernel.org,
linux-kernel@...r.kernel.org,
Geert Uytterhoeven <geert+renesas@...der.be>
Subject: [PATCH v3 7/7] arm64: dts: renesas: rzg2: Convert EtherAVB to explicit delay handling
Some EtherAVB variants support internal clock delay configuration, which
can add larger delays than the delays that are typically supported by
the PHY (using an "rgmii-*id" PHY mode, and/or "[rt]xc-skew-ps"
properties).
Historically, the EtherAVB driver configured these delays based on the
"rgmii-*id" PHY mode. This was wrong, as these are meant solely for the
PHY, not for the MAC. Hence properties were introduced for explicit
configuration of these delays.
Convert the RZ/G2 DTS files from the old to the new scheme:
- Add default "rx-internal-delay-ps" and "tx-internal-delay-ps"
properties to the SoC .dtsi files, to be overridden by board files
where needed,
- Convert board files from "rgmii-*id" PHY modes to "rgmii", adding
the appropriate "rx-internal-delay-ps" and/or "tx-internal-delay-ps"
overrides.
Notes:
- RZ/G2E does not support TX internal delay handling.
Signed-off-by: Geert Uytterhoeven <geert+renesas@...der.be>
---
This depends on "[PATCH v3 5/7] ravb: Add support for explicit internal
clock delay configuration", and thus must not be applied before its
dependency has hit upstream.
v3:
- Update new beacon-renesom-som.dtsi and r8a774e1.dtsi,
v2:
- Replace "renesas,[rt]xc-delay-ps" by "[rt]x-internal-delay-ps".
---
arch/arm64/boot/dts/renesas/beacon-renesom-som.dtsi | 3 ++-
arch/arm64/boot/dts/renesas/hihope-rzg2-ex.dtsi | 2 +-
arch/arm64/boot/dts/renesas/r8a774a1.dtsi | 2 ++
arch/arm64/boot/dts/renesas/r8a774b1.dtsi | 2 ++
arch/arm64/boot/dts/renesas/r8a774c0.dtsi | 1 +
arch/arm64/boot/dts/renesas/r8a774e1.dtsi | 2 ++
6 files changed, 10 insertions(+), 2 deletions(-)
diff --git a/arch/arm64/boot/dts/renesas/beacon-renesom-som.dtsi b/arch/arm64/boot/dts/renesas/beacon-renesom-som.dtsi
index 97272f5fa0abf92e..8ac167aa18f04743 100644
--- a/arch/arm64/boot/dts/renesas/beacon-renesom-som.dtsi
+++ b/arch/arm64/boot/dts/renesas/beacon-renesom-som.dtsi
@@ -55,7 +55,8 @@
pinctrl-0 = <&avb_pins>;
pinctrl-names = "default";
phy-handle = <&phy0>;
- phy-mode = "rgmii-id";
+ rx-internal-delay-ps = <1800>;
+ tx-internal-delay-ps = <2000>;
status = "okay";
phy0: ethernet-phy@0 {
diff --git a/arch/arm64/boot/dts/renesas/hihope-rzg2-ex.dtsi b/arch/arm64/boot/dts/renesas/hihope-rzg2-ex.dtsi
index 178401a34cbf8d38..46f1ca0b7ef5e7c2 100644
--- a/arch/arm64/boot/dts/renesas/hihope-rzg2-ex.dtsi
+++ b/arch/arm64/boot/dts/renesas/hihope-rzg2-ex.dtsi
@@ -19,7 +19,7 @@
pinctrl-0 = <&avb_pins>;
pinctrl-names = "default";
phy-handle = <&phy0>;
- phy-mode = "rgmii-txid";
+ tx-internal-delay-ps = <2000>;
status = "okay";
phy0: ethernet-phy@0 {
diff --git a/arch/arm64/boot/dts/renesas/r8a774a1.dtsi b/arch/arm64/boot/dts/renesas/r8a774a1.dtsi
index 8e80f50132ad55f5..ed99863f1dd09fd0 100644
--- a/arch/arm64/boot/dts/renesas/r8a774a1.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a774a1.dtsi
@@ -1115,6 +1115,8 @@
power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
resets = <&cpg 812>;
phy-mode = "rgmii";
+ rx-internal-delay-ps = <0>;
+ tx-internal-delay-ps = <0>;
iommus = <&ipmmu_ds0 16>;
#address-cells = <1>;
#size-cells = <0>;
diff --git a/arch/arm64/boot/dts/renesas/r8a774b1.dtsi b/arch/arm64/boot/dts/renesas/r8a774b1.dtsi
index 49e5addcfd97af01..1c76de24d3ea4844 100644
--- a/arch/arm64/boot/dts/renesas/r8a774b1.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a774b1.dtsi
@@ -989,6 +989,8 @@
power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
resets = <&cpg 812>;
phy-mode = "rgmii";
+ rx-internal-delay-ps = <0>;
+ tx-internal-delay-ps = <0>;
iommus = <&ipmmu_ds0 16>;
#address-cells = <1>;
#size-cells = <0>;
diff --git a/arch/arm64/boot/dts/renesas/r8a774c0.dtsi b/arch/arm64/boot/dts/renesas/r8a774c0.dtsi
index 42171190cce4602d..9fdca4c55ba95608 100644
--- a/arch/arm64/boot/dts/renesas/r8a774c0.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a774c0.dtsi
@@ -960,6 +960,7 @@
power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
resets = <&cpg 812>;
phy-mode = "rgmii";
+ rx-internal-delay-ps = <0>;
iommus = <&ipmmu_ds0 16>;
#address-cells = <1>;
#size-cells = <0>;
diff --git a/arch/arm64/boot/dts/renesas/r8a774e1.dtsi b/arch/arm64/boot/dts/renesas/r8a774e1.dtsi
index 0f86cfd524258353..0975bcbc3c502535 100644
--- a/arch/arm64/boot/dts/renesas/r8a774e1.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a774e1.dtsi
@@ -1139,6 +1139,8 @@
power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
resets = <&cpg 812>;
phy-mode = "rgmii";
+ rx-internal-delay-ps = <0>;
+ tx-internal-delay-ps = <0>;
iommus = <&ipmmu_ds0 16>;
#address-cells = <1>;
#size-cells = <0>;
--
2.17.1
Powered by blists - more mailing lists