lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20200820091609.654487420@linuxfoundation.org>
Date:   Thu, 20 Aug 2020 11:19:25 +0200
From:   Greg Kroah-Hartman <gregkh@...uxfoundation.org>
To:     linux-kernel@...r.kernel.org
Cc:     Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
        stable@...r.kernel.org, Peter Xu <peterx@...hat.com>,
        Andrew Morton <akpm@...ux-foundation.org>,
        Mike Kravetz <mike.kravetz@...cle.com>,
        Andrea Arcangeli <aarcange@...hat.com>,
        Matthew Wilcox <willy@...radead.org>,
        Linus Torvalds <torvalds@...ux-foundation.org>
Subject: [PATCH 5.7 068/204] mm/hugetlb: fix calculation of adjust_range_if_pmd_sharing_possible

From: Peter Xu <peterx@...hat.com>

commit 75802ca66354a39ab8e35822747cd08b3384a99a upstream.

This is found by code observation only.

Firstly, the worst case scenario should assume the whole range was covered
by pmd sharing.  The old algorithm might not work as expected for ranges
like (1g-2m, 1g+2m), where the adjusted range should be (0, 1g+2m) but the
expected range should be (0, 2g).

Since at it, remove the loop since it should not be required.  With that,
the new code should be faster too when the invalidating range is huge.

Mike said:

: With range (1g-2m, 1g+2m) within a vma (0, 2g) the existing code will only
: adjust to (0, 1g+2m) which is incorrect.
:
: We should cc stable.  The original reason for adjusting the range was to
: prevent data corruption (getting wrong page).  Since the range is not
: always adjusted correctly, the potential for corruption still exists.
:
: However, I am fairly confident that adjust_range_if_pmd_sharing_possible
: is only gong to be called in two cases:
:
: 1) for a single page
: 2) for range == entire vma
:
: In those cases, the current code should produce the correct results.
:
: To be safe, let's just cc stable.

Fixes: 017b1660df89 ("mm: migration: fix migration of huge PMD shared pages")
Signed-off-by: Peter Xu <peterx@...hat.com>
Signed-off-by: Andrew Morton <akpm@...ux-foundation.org>
Reviewed-by: Mike Kravetz <mike.kravetz@...cle.com>
Cc: Andrea Arcangeli <aarcange@...hat.com>
Cc: Matthew Wilcox <willy@...radead.org>
Cc: <stable@...r.kernel.org>
Link: http://lkml.kernel.org/r/20200730201636.74778-1-peterx@redhat.com
Signed-off-by: Linus Torvalds <torvalds@...ux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@...uxfoundation.org>

---
 mm/hugetlb.c |   24 ++++++++++--------------
 1 file changed, 10 insertions(+), 14 deletions(-)

--- a/mm/hugetlb.c
+++ b/mm/hugetlb.c
@@ -5201,25 +5201,21 @@ static bool vma_shareable(struct vm_area
 void adjust_range_if_pmd_sharing_possible(struct vm_area_struct *vma,
 				unsigned long *start, unsigned long *end)
 {
-	unsigned long check_addr;
+	unsigned long a_start, a_end;
 
 	if (!(vma->vm_flags & VM_MAYSHARE))
 		return;
 
-	for (check_addr = *start; check_addr < *end; check_addr += PUD_SIZE) {
-		unsigned long a_start = check_addr & PUD_MASK;
-		unsigned long a_end = a_start + PUD_SIZE;
+	/* Extend the range to be PUD aligned for a worst case scenario */
+	a_start = ALIGN_DOWN(*start, PUD_SIZE);
+	a_end = ALIGN(*end, PUD_SIZE);
 
-		/*
-		 * If sharing is possible, adjust start/end if necessary.
-		 */
-		if (range_in_vma(vma, a_start, a_end)) {
-			if (a_start < *start)
-				*start = a_start;
-			if (a_end > *end)
-				*end = a_end;
-		}
-	}
+	/*
+	 * Intersect the range with the vma range, since pmd sharing won't be
+	 * across vma after all
+	 */
+	*start = max(vma->vm_start, a_start);
+	*end = min(vma->vm_end, a_end);
 }
 
 /*


Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ