linux-kernel - [PATCH v3 4/4] dt-bindings: regulator: Convert mp886x to json-schema

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20200820171232.1fede9bc@xhacker.debian>
Date:   Thu, 20 Aug 2020 17:12:32 +0800
From:   Jisheng Zhang <Jisheng.Zhang@...aptics.com>
To:     Liam Girdwood <lgirdwood@...il.com>,
        Mark Brown <broonie@...nel.org>,
        Rob Herring <robh+dt@...nel.org>,
        Saravanan Sekar <sravanhome@...il.com>
Cc:     linux-kernel@...r.kernel.org, devicetree@...r.kernel.org
Subject: [PATCH v3 4/4] dt-bindings: regulator: Convert mp886x to
 json-schema

Convert the mp886x binding to DT schema format using json-schema.

Signed-off-by: Jisheng Zhang <Jisheng.Zhang@...aptics.com>
---
 .../devicetree/bindings/regulator/mp886x.txt  | 31 ----------
 .../bindings/regulator/mps,mp886x.yaml        | 61 +++++++++++++++++++
 2 files changed, 61 insertions(+), 31 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/regulator/mp886x.txt
 create mode 100644 Documentation/devicetree/bindings/regulator/mps,mp886x.yaml

diff --git a/Documentation/devicetree/bindings/regulator/mp886x.txt b/Documentation/devicetree/bindings/regulator/mp886x.txt
deleted file mode 100644
index b05307bbb0d9..000000000000
--- a/Documentation/devicetree/bindings/regulator/mp886x.txt
+++ /dev/null
@@ -1,31 +0,0 @@
-Monolithic Power Systems MP8867/MP8869 voltage regulator
-
-Required properties:
-- compatible: Must be one of the following.
-	"mps,mp8867"
-	"mps,mp8869"
-- reg: I2C slave address.
-- enable-gpios: enable gpios.
-- mps,fb-voltage-divider: An array of two integers containing the resistor
-  values R1 and R2 of the feedback voltage divider in kilo ohms.
-
-Optional properties:
-- mps,switch-frequency-hz: The valid switch frequency in Hertz. Available values
-  are: 500000, 750000, 1000000, 1250000, 1500000
-
-Any property defined as part of the core regulator binding, defined in
-./regulator.txt, can also be used.
-
-Example:
-
-	vcpu: regulator@62 {
-		compatible = "mps,mp8869";
-		regulator-name = "vcpu";
-		regulator-min-microvolt = <700000>;
-		regulator-max-microvolt = <850000>;
-		regulator-always-on;
-		regulator-boot-on;
-		enable-gpios = <&porta 1 GPIO_ACTIVE_LOW>;
-		mps,fb-voltage-divider = <80 240>;
-		reg = <0x62>;
-	};
diff --git a/Documentation/devicetree/bindings/regulator/mps,mp886x.yaml b/Documentation/devicetree/bindings/regulator/mps,mp886x.yaml
new file mode 100644
index 000000000000..ba175b30f468
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/mps,mp886x.yaml
@@ -0,0 +1,61 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/mps,mp886x.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Monolithic Power Systems MP8867/MP8869 voltage regulator
+
+maintainers:
+  - Jisheng Zhang <jszhang@...nel.org>
+
+allOf:
+  - $ref: regulator.yaml#
+
+properties:
+  compatible:
+    enum:
+      - mps,mp8867
+      - mps,mp8869
+
+  reg:
+    maxItems: 1
+
+  enable-gpios:
+    description: GPIO to enable/disable the regulator.
+    maxItems: 1
+
+  mps,fb-voltage-divider:
+    description: An array of two integers containing the resistor
+      values R1 and R2 of the feedback voltage divider in kilo ohms.
+    $ref: "/schemas/types.yaml#/definitions/uint32-array"
+    maxItems: 2
+
+  mps,switch-frequency-hz:
+    description: The valid switch frequency in Hertz.
+    enum: [500000, 750000, 1000000, 1250000, 1500000]
+
+required:
+  - compatible
+  - reg
+  - enable-gpios
+  - mps,fb-voltage-divider
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        regulator@62 {
+          compatible = "mps,mp8869";
+          regulator-name = "vcpu";
+          regulator-min-microvolt = <800000>;
+          regulator-max-microvolt = <1150000>;
+          enable-gpios = <&porta 1 GPIO_ACTIVE_LOW>;
+          mps,fb-voltage-divider = <80 240>;
+          reg = <0x62>;
+        };
+    };
+
+...
-- 
2.28.0