lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
Open Source and information security mailing list archives
| ||
|
Date: Thu, 20 Aug 2020 11:18:24 +0200 From: Greg Kroah-Hartman <gregkh@...uxfoundation.org> To: linux-kernel@...r.kernel.org Cc: Greg Kroah-Hartman <gregkh@...uxfoundation.org>, stable@...r.kernel.org, João Henrique <johnnyonflame@...mail.com>, Paul Cercueil <paul@...pouillou.net>, Linus Walleij <linus.walleij@...aro.org> Subject: [PATCH 5.8 053/232] pinctrl: ingenic: Enhance support for IRQ_TYPE_EDGE_BOTH From: Paul Cercueil <paul@...pouillou.net> commit 1c95348ba327fe8621d3680890c2341523d3524a upstream. Ingenic SoCs don't natively support registering an interrupt for both rising and falling edges. This has to be emulated in software. Until now, this was emulated by switching back and forth between IRQ_TYPE_EDGE_RISING and IRQ_TYPE_EDGE_FALLING according to the level of the GPIO. While this worked most of the time, when used with GPIOs that need debouncing, some events would be lost. For instance, between the time a falling-edge interrupt happens and the interrupt handler configures the hardware for rising-edge, the level of the pin may have already risen, and the rising-edge event is lost. To address that issue, instead of switching back and forth between IRQ_TYPE_EDGE_RISING and IRQ_TYPE_EDGE_FALLING, we now switch back and forth between IRQ_TYPE_LEVEL_LOW and IRQ_TYPE_LEVEL_HIGH. Since we always switch in the interrupt handler, they actually permit to detect level changes. In the example above, if the pin level rises before switching the IRQ type from IRQ_TYPE_LEVEL_LOW to IRQ_TYPE_LEVEL_HIGH, a new interrupt will raise as soon as the handler exits, and the rising-edge event will be properly detected. Fixes: e72394e2ea19 ("pinctrl: ingenic: Merge GPIO functionality") Reported-by: João Henrique <johnnyonflame@...mail.com> Signed-off-by: Paul Cercueil <paul@...pouillou.net> Tested-by: João Henrique <johnnyonflame@...mail.com> Cc: stable@...r.kernel.org Link: https://lore.kernel.org/r/20200622214548.265417-1-paul@crapouillou.net Signed-off-by: Linus Walleij <linus.walleij@...aro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@...uxfoundation.org> --- drivers/pinctrl/pinctrl-ingenic.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) --- a/drivers/pinctrl/pinctrl-ingenic.c +++ b/drivers/pinctrl/pinctrl-ingenic.c @@ -1810,9 +1810,9 @@ static void ingenic_gpio_irq_ack(struct */ high = ingenic_gpio_get_value(jzgc, irq); if (high) - irq_set_type(jzgc, irq, IRQ_TYPE_EDGE_FALLING); + irq_set_type(jzgc, irq, IRQ_TYPE_LEVEL_LOW); else - irq_set_type(jzgc, irq, IRQ_TYPE_EDGE_RISING); + irq_set_type(jzgc, irq, IRQ_TYPE_LEVEL_HIGH); } if (jzgc->jzpc->info->version >= ID_JZ4760) @@ -1848,7 +1848,7 @@ static int ingenic_gpio_irq_set_type(str */ bool high = ingenic_gpio_get_value(jzgc, irqd->hwirq); - type = high ? IRQ_TYPE_EDGE_FALLING : IRQ_TYPE_EDGE_RISING; + type = high ? IRQ_TYPE_LEVEL_LOW : IRQ_TYPE_LEVEL_HIGH; } irq_set_type(jzgc, irqd->hwirq, type);
Powered by blists - more mailing lists