| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20200821161401.11307-7-l.stelmach@samsung.com>
Date: Fri, 21 Aug 2020 18:13:58 +0200
From: Łukasz Stelmach <l.stelmach@...sung.com>
To: Kukjin Kim <kgene@...nel.org>,
Krzysztof Kozlowski <krzk@...nel.org>,
Andi Shyti <andi@...zian.org>, Mark Brown <broonie@...nel.org>,
linux-spi@...r.kernel.org, linux-samsung-soc@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org
Cc: m.szyprowski@...sung.com, b.zolnierkie@...sung.com,
Łukasz Stelmach <l.stelmach@...sung.com>
Subject: [PATCH v2 6/9] spi: spi-s3c64xx: Check return values
Check return values in prepare_dma() and s3c64xx_spi_config() and
propagate errors upwards.
Signed-off-by: Łukasz Stelmach <l.stelmach@...sung.com>
---
drivers/spi/spi-s3c64xx.c | 47 ++++++++++++++++++++++++++++++++-------
1 file changed, 39 insertions(+), 8 deletions(-)
diff --git a/drivers/spi/spi-s3c64xx.c b/drivers/spi/spi-s3c64xx.c
index 6381a7557def..02de734b8ab1 100644
--- a/drivers/spi/spi-s3c64xx.c
+++ b/drivers/spi/spi-s3c64xx.c
@@ -269,12 +269,13 @@ static void s3c64xx_spi_dmacb(void *data)
spin_unlock_irqrestore(&sdd->lock, flags);
}
-static void prepare_dma(struct s3c64xx_spi_dma_data *dma,
+static int prepare_dma(struct s3c64xx_spi_dma_data *dma,
struct sg_table *sgt)
{
struct s3c64xx_spi_driver_data *sdd;
struct dma_slave_config config;
struct dma_async_tx_descriptor *desc;
+ int ret;
memset(&config, 0, sizeof(config));
@@ -298,12 +299,24 @@ static void prepare_dma(struct s3c64xx_spi_dma_data *dma,
desc = dmaengine_prep_slave_sg(dma->ch, sgt->sgl, sgt->nents,
dma->direction, DMA_PREP_INTERRUPT);
+ if (!desc) {
+ dev_err(&sdd->pdev->dev, "unable to prepare %s scatterlist",
+ dma->direction == DMA_DEV_TO_MEM ? "rx" : "tx");
+ return -ENOMEM;
+ }
desc->callback = s3c64xx_spi_dmacb;
desc->callback_param = dma;
dma->cookie = dmaengine_submit(desc);
+ ret = dma_submit_error(dma->cookie);
+ if (ret) {
+ dev_err(&sdd->pdev->dev, "DMA submission failed");
+ return -EIO;
+ }
+
dma_async_issue_pending(dma->ch);
+ return 0;
}
static void s3c64xx_spi_set_cs(struct spi_device *spi, bool enable)
@@ -353,11 +366,12 @@ static bool s3c64xx_spi_can_dma(struct spi_master *master,
return xfer->len > (FIFO_LVL_MASK(sdd) >> 1) + 1;
}
-static void s3c64xx_enable_datapath(struct s3c64xx_spi_driver_data *sdd,
+static int s3c64xx_enable_datapath(struct s3c64xx_spi_driver_data *sdd,
struct spi_transfer *xfer, int dma_mode)
{
void __iomem *regs = sdd->regs;
u32 modecfg, chcfg;
+ int ret = 0;
modecfg = readl(regs + S3C64XX_SPI_MODE_CFG);
modecfg &= ~(S3C64XX_SPI_MODE_TXDMA_ON | S3C64XX_SPI_MODE_RXDMA_ON);
@@ -383,7 +397,7 @@ static void s3c64xx_enable_datapath(struct s3c64xx_spi_driver_data *sdd,
chcfg |= S3C64XX_SPI_CH_TXCH_ON;
if (dma_mode) {
modecfg |= S3C64XX_SPI_MODE_TXDMA_ON;
- prepare_dma(&sdd->tx_dma, &xfer->tx_sg);
+ ret = prepare_dma(&sdd->tx_dma, &xfer->tx_sg);
} else {
switch (sdd->cur_bpw) {
case 32:
@@ -415,12 +429,17 @@ static void s3c64xx_enable_datapath(struct s3c64xx_spi_driver_data *sdd,
writel(((xfer->len * 8 / sdd->cur_bpw) & 0xffff)
| S3C64XX_SPI_PACKET_CNT_EN,
regs + S3C64XX_SPI_PACKET_CNT);
- prepare_dma(&sdd->rx_dma, &xfer->rx_sg);
+ ret = prepare_dma(&sdd->rx_dma, &xfer->rx_sg);
}
}
+ if (ret)
+ return ret;
+
writel(modecfg, regs + S3C64XX_SPI_MODE_CFG);
writel(chcfg, regs + S3C64XX_SPI_CH_CFG);
+
+ return 0;
}
static u32 s3c64xx_spi_wait_for_timeout(struct s3c64xx_spi_driver_data *sdd,
@@ -553,9 +572,10 @@ static int s3c64xx_wait_for_pio(struct s3c64xx_spi_driver_data *sdd,
return 0;
}
-static void s3c64xx_spi_config(struct s3c64xx_spi_driver_data *sdd)
+static int s3c64xx_spi_config(struct s3c64xx_spi_driver_data *sdd)
{
void __iomem *regs = sdd->regs;
+ int ret;
u32 val;
/* Disable Clock */
@@ -603,7 +623,9 @@ static void s3c64xx_spi_config(struct s3c64xx_spi_driver_data *sdd)
if (sdd->port_conf->clk_from_cmu) {
/* The src_clk clock is divided internally by 2 */
- clk_set_rate(sdd->src_clk, sdd->cur_speed * 2);
+ ret = clk_set_rate(sdd->src_clk, sdd->cur_speed * 2);
+ if (ret)
+ return ret;
} else {
/* Configure Clock */
val = readl(regs + S3C64XX_SPI_CLK_CFG);
@@ -617,6 +639,8 @@ static void s3c64xx_spi_config(struct s3c64xx_spi_driver_data *sdd)
val |= S3C64XX_SPI_ENCLK_ENABLE;
writel(val, regs + S3C64XX_SPI_CLK_CFG);
}
+
+ return 0;
}
#define XFER_DMAADDR_INVALID DMA_BIT_MASK(32)
@@ -659,7 +683,9 @@ static int s3c64xx_spi_transfer_one(struct spi_master *master,
sdd->cur_bpw = bpw;
sdd->cur_speed = speed;
sdd->cur_mode = spi->mode;
- s3c64xx_spi_config(sdd);
+ status = s3c64xx_spi_config(sdd);
+ if (status)
+ return status;
}
if (!is_polling(sdd) && (xfer->len > fifo_len) &&
@@ -686,10 +712,15 @@ static int s3c64xx_spi_transfer_one(struct spi_master *master,
/* Start the signals */
s3c64xx_spi_set_cs(spi, true);
- s3c64xx_enable_datapath(sdd, xfer, use_dma);
+ status = s3c64xx_enable_datapath(sdd, xfer, use_dma);
spin_unlock_irqrestore(&sdd->lock, flags);
+ if (status) {
+ dev_err(&spi->dev, "failed to enable data path for transfer: %d\n", status);
+ break;
+ }
+
if (use_dma)
status = s3c64xx_wait_for_dma(sdd, xfer);
else
--
2.26.2
Powered by blists - more mailing lists