Message-ID: <20200821173718.000028fc@Huawei.com>
Date:   Fri, 21 Aug 2020 17:37:18 +0100
From:   Jonathan Cameron <Jonathan.Cameron@...wei.com>
To:     Bjorn Helgaas <helgaas@...nel.org>
CC:     <linux-mm@...ck.org>, <linux-acpi@...r.kernel.org>,
        <linux-arm-kernel@...ts.infradead.org>, <x86@...nel.org>,
        Lorenzo Pieralisi <lorenzo.pieralisi@....com>,
        Bjorn Helgaas <bhelgaas@...gle.com>, <rafael@...nel.org>,
        <linux-kernel@...r.kernel.org>, Ingo Molnar <mingo@...hat.com>,
        Thomas Gleixner <tglx@...utronix.de>, <linuxarm@...wei.com>,
        Dan Williams <dan.j.williams@...el.com>,
        "Brice Goglin" <Brice.Goglin@...ia.fr>,
        Sean V Kelley <sean.v.kelley@...ux.intel.com>,
        <linux-api@...r.kernel.org>, Keith Busch <kbusch@...nel.org>
Subject: Re: [PATCH v9 4/6] ACPI: HMAT: Fix handling of changes from ACPI
 6.2 to ACPI 6.3

On Fri, 21 Aug 2020 08:46:22 -0500
Bjorn Helgaas <helgaas@...nel.org> wrote:

> On Fri, Aug 21, 2020 at 01:59:01PM +0100, Jonathan Cameron wrote:
> > On Fri, 21 Aug 2020 07:13:56 -0500
> > Bjorn Helgaas <helgaas@...nel.org> wrote:
> >   
> > > [+cc Keith, author of 3accf7ae37a9 ("acpi/hmat: Parse and report
> > > heterogeneous memory")]
> > > 
> > > On Fri, Aug 21, 2020 at 09:42:58AM +0100, Jonathan Cameron wrote:  
> > > > On Thu, 20 Aug 2020 17:21:29 -0500
> > > > Bjorn Helgaas <helgaas@...nel.org> wrote:
> > > >     
> > > > > On Wed, Aug 19, 2020 at 10:51:09PM +0800, Jonathan Cameron wrote:    
> > > > > > In ACPI 6.3, the Memory Proximity Domain Attributes Structure
> > > > > > changed substantially.  One of those changes was that the flag
> > > > > > for "Memory Proximity Domain field is valid" was deprecated.
> > > > > > 
> > > > > > This was because the field "Proximity Domain for the Memory"
> > > > > > became a required field and hence having a validity flag makes
> > > > > > no sense.
> > > > > > 
> > > > > > So the correct logic is to always assume the field is there.
> > > > > > Current code assumes it never is.
> > > > > > 
> > > > > > Signed-off-by: Jonathan Cameron <Jonathan.Cameron@...wei.com>
> > > > > > ---
> > > > > >  drivers/acpi/numa/hmat.c | 2 +-
> > > > > >  1 file changed, 1 insertion(+), 1 deletion(-)
> > > > > > 
> > > > > > diff --git a/drivers/acpi/numa/hmat.c b/drivers/acpi/numa/hmat.c
> > > > > > index 2c32cfb72370..07cfe50136e0 100644
> > > > > > --- a/drivers/acpi/numa/hmat.c
> > > > > > +++ b/drivers/acpi/numa/hmat.c
> > > > > > @@ -424,7 +424,7 @@ static int __init hmat_parse_proximity_domain(union acpi_subtable_headers *heade
> > > > > >  		pr_info("HMAT: Memory Flags:%04x Processor Domain:%u Memory Domain:%u\n",
> > > > > >  			p->flags, p->processor_PD, p->memory_PD);
> > > > > >  
> > > > > > -	if (p->flags & ACPI_HMAT_MEMORY_PD_VALID && hmat_revision == 1) {
> > > > > > +	if ((p->flags & ACPI_HMAT_MEMORY_PD_VALID && hmat_revision == 1) || hmat_revision == 2) {      
> > > > > 
> > > > > I hope/assume the spec is written in such a way that p->memory_PD is
> > > > > required for any revision > 1?  So maybe this should be:
> > > > > 
> > > > >   if ((p->flags & ACPI_HMAT_MEMORY_PD_VALID && hmat_revision == 1) ||
> > > > >       hmat_revision > 1) {    
> > > 
> > > I should have said simply:
> > > 
> > >   if (hmat_revision == 1 && p->flags & ACPI_HMAT_MEMORY_PD_VALID)
> > > 
> > > We shouldn't even test p->flags for ACPI_HMAT_MEMORY_PD_VALID unless
> > > we already know it's revision 1.
> > > 
> > > And unless there was a revision 0 of HMAT, there's no need to look for
> > > hmat_revison > 1.  
> > 
> > It needs to stay as an or statement as you had the first time.
> > The field is always valid for hmat_revision > 1, and valid for
> > hmat_revision == 1 with the flag set.  You could express it as
> > 
> > if ((p->flags & ACPI_HMAT_MEMORY_PD_VALID) || (hmat_revision != 1))
> > 
> > but that seems more confusing to me.  
> 
> Oh, you're right, sorry!  There are two questions here:
> 
> 1) In what order should we test "p->flags & ACPI_HMAT_MEMORY_PD_VALID"
>    and "hmat_revision == 1"?  ACPI_HMAT_MEMORY_PD_VALID is defined
>    only when "hmat_revision == 1", so I think we should test the
>    revision first.
> 
>    When "hmat_revision == 2", ACPI_HMAT_MEMORY_PD_VALID is reserved,
>    so we shouldn't test it, even if we later check the revision and
>    discard the result of the flag test.  This is a tiny thing,
>    admittedly, but I think it follows the spec more clearly.

Agreed.

> 
> 2) Do we need to test hmat_revision for anything other than 1?  Yes,
>    you're right, see below.
> 
> > > > Good point.  We have existing protections elsewhere against
> > > > hmat_revision being anything other than 1 or 2, so we should aim to
> > > > keep that in only one place.    
> > > 
> > > I think the "Ignoring HMAT: Unknown revision" test in hmat_init(),
> > > added by 3accf7ae37a9 ("acpi/hmat: Parse and report heterogeneous
> > > memory"), is a mistake.
> > > 
> > > And I think hmat_normalize() has a similar mistake in that it tests
> > > explicitly for hmat_revision == 2 when it should accept 2 AND anything
> > > later.
> > > 
> > > We should assume that future spec revisions will be backwards
> > > compatible.  Otherwise we're forced to make kernel changes when we
> > > otherwise would not have to.  
> > 
> > I disagree with this. There is no rule in ACPI about maintaining
> > backwards compatibility. The assumption is that the version number
> > will always be checked.  The meaning of fields changed between
> > version 1 and version 2 so it would be bold to assume that won't
> > happen in the future!  
> 
> There *is* a rule about maintaining backwards compatibility.  ACPI
> v6.3, sec 5.2.2, says:
> 
>   All versions of the ACPI tables must maintain backward
>   compatibility. To accomplish this, modifications of the tables
>   consist of redefinition of previously reserved fields and values
>   plus appending data to the 1.0 tables. Modifications of the ACPI
>   tables require that the version numbers of the modified tables be
>   incremented.

Fair point.  Unfortunately it's not true here...  The field we
are talking about here is probably fine, but the latency units
changed between v1 and v2.  

> 
> > HMAT is an optional table, so if someone boots up an old kernel
> > they are probably better off failing to use it at all than
> > misinterpreting it.   
> 
> An old kernel tests:
> 
>   if (p->flags & ACPI_HMAT_MEMORY_PD_VALID && hmat_revision == 1)
>     target = find_mem_target(p->memory_PD);
> 
> which is fine on old firmware.  On new firmware (hmat_revision == 2),
> it will ignore p->memory_PD.  That is probably a problem, but I think
> we should check for that at the place where we need a memory_PD and
> don't find one.  That's more general than sanity checking a revision.
> 
> A new kernel that tests:
> 
>   if ((hmat_revision == 1 && p->flags & ACPI_HMAT_MEMORY_PD_VALID) ||
>        hmat_revision > 1)
>     target = find_mem_target(p->memory_PD);
> 
> will do the right thing on both old and new firmware.
> 

For the case here we are fine, but as mentioned above, it's not the
only version dependent part.

Jonathan


> Bjorn

Powered by blists - more mailing lists