[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20200821161401.11307-5-l.stelmach@samsung.com>
Date: Fri, 21 Aug 2020 18:13:56 +0200
From: Łukasz Stelmach <l.stelmach@...sung.com>
To: Kukjin Kim <kgene@...nel.org>,
Krzysztof Kozlowski <krzk@...nel.org>,
Andi Shyti <andi@...zian.org>, Mark Brown <broonie@...nel.org>,
linux-spi@...r.kernel.org, linux-samsung-soc@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org
Cc: m.szyprowski@...sung.com, b.zolnierkie@...sung.com,
Łukasz Stelmach <l.stelmach@...sung.com>
Subject: [PATCH v2 4/9] spi: spi-s3c64xx: Rename S3C64XX_SPI_SLAVE_* to
S3C64XX_SPI_CS_*
Rename S3C64XX_SPI_SLAVE_* to S3C64XX_SPI_CS_* to match documentation.
Signed-off-by: Łukasz Stelmach <l.stelmach@...sung.com>
Reviewed-by: Krzysztof Kozlowski <krzk@...nel.org>
---
drivers/spi/spi-s3c64xx.c | 26 +++++++++++++-------------
1 file changed, 13 insertions(+), 13 deletions(-)
diff --git a/drivers/spi/spi-s3c64xx.c b/drivers/spi/spi-s3c64xx.c
index 3364d362ed21..433b9d77b914 100644
--- a/drivers/spi/spi-s3c64xx.c
+++ b/drivers/spi/spi-s3c64xx.c
@@ -29,7 +29,7 @@
#define S3C64XX_SPI_CH_CFG 0x00
#define S3C64XX_SPI_CLK_CFG 0x04
#define S3C64XX_SPI_MODE_CFG 0x08
-#define S3C64XX_SPI_SLAVE_SEL 0x0C
+#define S3C64XX_SPI_CS_REG 0x0C
#define S3C64XX_SPI_INT_EN 0x10
#define S3C64XX_SPI_STATUS 0x14
#define S3C64XX_SPI_TX_DATA 0x18
@@ -64,9 +64,9 @@
#define S3C64XX_SPI_MODE_TXDMA_ON (1<<1)
#define S3C64XX_SPI_MODE_4BURST (1<<0)
-#define S3C64XX_SPI_SLAVE_AUTO (1<<1)
-#define S3C64XX_SPI_SLAVE_SIG_INACT (1<<0)
-#define S3C64XX_SPI_SLAVE_NSC_CNT_2 (2<<4)
+#define S3C64XX_SPI_CS_NSC_CNT_2 (2<<4)
+#define S3C64XX_SPI_CS_AUTO (1<<1)
+#define S3C64XX_SPI_CS_SIG_INACT (1<<0)
#define S3C64XX_SPI_INT_TRAILING_EN (1<<6)
#define S3C64XX_SPI_INT_RX_OVERRUN_EN (1<<5)
@@ -319,18 +319,18 @@ static void s3c64xx_spi_set_cs(struct spi_device *spi, bool enable)
if (enable) {
if (!(sdd->port_conf->quirks & S3C64XX_SPI_QUIRK_CS_AUTO)) {
- writel(0, sdd->regs + S3C64XX_SPI_SLAVE_SEL);
+ writel(0, sdd->regs + S3C64XX_SPI_CS_REG);
} else {
- u32 ssel = readl(sdd->regs + S3C64XX_SPI_SLAVE_SEL);
+ u32 ssel = readl(sdd->regs + S3C64XX_SPI_CS_REG);
- ssel |= (S3C64XX_SPI_SLAVE_AUTO |
- S3C64XX_SPI_SLAVE_NSC_CNT_2);
- writel(ssel, sdd->regs + S3C64XX_SPI_SLAVE_SEL);
+ ssel |= (S3C64XX_SPI_CS_AUTO |
+ S3C64XX_SPI_CS_NSC_CNT_2);
+ writel(ssel, sdd->regs + S3C64XX_SPI_CS_REG);
}
} else {
if (!(sdd->port_conf->quirks & S3C64XX_SPI_QUIRK_CS_AUTO))
- writel(S3C64XX_SPI_SLAVE_SIG_INACT,
- sdd->regs + S3C64XX_SPI_SLAVE_SEL);
+ writel(S3C64XX_SPI_CS_SIG_INACT,
+ sdd->regs + S3C64XX_SPI_CS_REG);
}
}
@@ -951,9 +951,9 @@ static void s3c64xx_spi_hwinit(struct s3c64xx_spi_driver_data *sdd)
sdd->cur_speed = 0;
if (sci->no_cs)
- writel(0, sdd->regs + S3C64XX_SPI_SLAVE_SEL);
+ writel(0, sdd->regs + S3C64XX_SPI_CS_REG);
else if (!(sdd->port_conf->quirks & S3C64XX_SPI_QUIRK_CS_AUTO))
- writel(S3C64XX_SPI_SLAVE_SIG_INACT, sdd->regs + S3C64XX_SPI_SLAVE_SEL);
+ writel(S3C64XX_SPI_CS_SIG_INACT, sdd->regs + S3C64XX_SPI_CS_REG);
/* Disable Interrupts - we use Polling if not DMA mode */
writel(0, regs + S3C64XX_SPI_INT_EN);
--
2.26.2
Powered by blists - more mailing lists