lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Date:   Fri, 21 Aug 2020 15:56:16 -0400
From:   Tony Krowiak <akrowiak@...ux.ibm.com>
To:     linux-s390@...r.kernel.org, linux-kernel@...r.kernel.org,
        kvm@...r.kernel.org
Cc:     freude@...ux.ibm.com, borntraeger@...ibm.com, cohuck@...hat.com,
        mjrosato@...ux.ibm.com, pasic@...ux.ibm.com,
        alex.williamson@...hat.com, kwankhede@...dia.com,
        fiuczy@...ux.ibm.com, frankja@...ux.ibm.com, david@...hat.com,
        imbrenda@...ux.ibm.com, hca@...ux.ibm.com, gor@...ux.ibm.com,
        Tony Krowiak <akrowiak@...ux.ibm.com>
Subject: [PATCH v10 16/16] s390/vfio-ap: update docs to include dynamic config support

Update the documentation in vfio-ap.rst to include information about the
AP dynamic configuration support (i.e., hot plug of adapters, domains
and control domains via the matrix mediated device's sysfs assignment
attributes).

Signed-off-by: Tony Krowiak <akrowiak@...ux.ibm.com>
---
 Documentation/s390/vfio-ap.rst | 362 ++++++++++++++++++++++++++-------
 1 file changed, 285 insertions(+), 77 deletions(-)

diff --git a/Documentation/s390/vfio-ap.rst b/Documentation/s390/vfio-ap.rst
index e15436599086..8907aeca8fb7 100644
--- a/Documentation/s390/vfio-ap.rst
+++ b/Documentation/s390/vfio-ap.rst
@@ -253,7 +253,7 @@ The process for reserving an AP queue for use by a KVM guest is:
 1. The administrator loads the vfio_ap device driver
 2. The vfio-ap driver during its initialization will register a single 'matrix'
    device with the device core. This will serve as the parent device for
-   all mediated matrix devices used to configure an AP matrix for a guest.
+   all matrix mediated devices used to configure an AP matrix for a guest.
 3. The /sys/devices/vfio_ap/matrix device is created by the device core
 4. The vfio_ap device driver will register with the AP bus for AP queue devices
    of type 10 and higher (CEX4 and newer). The driver will provide the vfio_ap
@@ -269,7 +269,7 @@ The process for reserving an AP queue for use by a KVM guest is:
    default zcrypt cex4queue driver.
 8. The AP bus probes the vfio_ap device driver to bind the queues reserved for
    it.
-9. The administrator creates a passthrough type mediated matrix device to be
+9. The administrator creates a passthrough type matrix mediated device to be
    used by a guest
 10. The administrator assigns the adapters, usage domains and control domains
     to be exclusively used by a guest.
@@ -279,14 +279,14 @@ Set up the VFIO mediated device interfaces
 The VFIO AP device driver utilizes the common interface of the VFIO mediated
 device core driver to:
 
-* Register an AP mediated bus driver to add a mediated matrix device to and
+* Register an AP mediated bus driver to add a matrix mediated device to and
   remove it from a VFIO group.
-* Create and destroy a mediated matrix device
-* Add a mediated matrix device to and remove it from the AP mediated bus driver
-* Add a mediated matrix device to and remove it from an IOMMU group
+* Create and destroy a matrix mediated device
+* Add a matrix mediated device to and remove it from the AP mediated bus driver
+* Add a matrix mediated device to and remove it from an IOMMU group
 
 The following high-level block diagram shows the main components and interfaces
-of the VFIO AP mediated matrix device driver::
+of the VFIO AP matrix mediated device driver::
 
    +-------------+
    |             |
@@ -351,29 +351,37 @@ matrix device.
     This attribute group identifies the user-defined sysfs attributes of the
     mediated device. When a device is registered with the VFIO mediated device
     framework, the sysfs attribute files identified in the 'mdev_attr_groups'
-    structure will be created in the mediated matrix device's directory. The
-    sysfs attributes for a mediated matrix device are:
+    structure will be created in the matrix mediated device's directory. The
+    sysfs attributes for a matrix mediated device are:
 
     assign_adapter / unassign_adapter:
       Write-only attributes for assigning/unassigning an AP adapter to/from the
-      mediated matrix device. To assign/unassign an adapter, the APID of the
+      matrix mediated device. To assign/unassign an adapter, the APID of the
       adapter is echoed to the respective attribute file.
     assign_domain / unassign_domain:
       Write-only attributes for assigning/unassigning an AP usage domain to/from
-      the mediated matrix device. To assign/unassign a domain, the domain
+      the matrix mediated device. To assign/unassign a domain, the domain
       number of the usage domain is echoed to the respective attribute
       file.
     matrix:
-      A read-only file for displaying the APQNs derived from the cross product
-      of the adapter and domain numbers assigned to the mediated matrix device.
+      A read-only file for displaying the APQNs derived from the Cartesian
+      product of the adapter and domain numbers assigned to the mediated matrix
+      device.
+    guest_matrix:
+      A read-only file for displaying the APQNs derived from the Cartesian
+      product of the adapter and domain numbers assigned to the APM and AQM
+      fields respectively of the KVM guest's CRYCB. This will differ from the
+      matrix if any APQNs assigned to the matrix mediated device do not
+      reference a queue device bound to the vfio_ap device driver (i.e., the
+      queue is not in the AP configuration).
     assign_control_domain / unassign_control_domain:
       Write-only attributes for assigning/unassigning an AP control domain
-      to/from the mediated matrix device. To assign/unassign a control domain,
+      to/from the matrix mediated device. To assign/unassign a control domain,
       the ID of the domain to be assigned/unassigned is echoed to the respective
       attribute file.
     control_domains:
       A read-only file for displaying the control domain numbers assigned to the
-      mediated matrix device.
+      matrix mediated device.
 
 * functions:
 
@@ -385,7 +393,7 @@ matrix device.
       domains assigned via the corresponding sysfs attributes files
 
   remove:
-    deallocates the mediated matrix device's ap_matrix_mdev structure. This will
+    deallocates the matrix mediated device's ap_matrix_mdev structure. This will
     be allowed only if a running guest is not using the mdev.
 
 * callback interfaces
@@ -397,7 +405,7 @@ matrix device.
     for the mdev matrix device to the MDEV bus. Access to the KVM structure used
     to configure the KVM guest is provided via this callback. The KVM structure,
     is used to configure the guest's access to the AP matrix defined via the
-    mediated matrix device's sysfs attribute files.
+    matrix mediated device's sysfs attribute files.
   release:
     unregisters the VFIO_GROUP_NOTIFY_SET_KVM notifier callback function for the
     mdev matrix device and deconfigures the guest's AP matrix.
@@ -410,11 +418,49 @@ function is called when QEMU connects to KVM. The guest's AP matrix is
 configured via it's CRYCB by:
 
 * Setting the bits in the APM corresponding to the APIDs assigned to the
-  mediated matrix device via its 'assign_adapter' interface.
+  matrix mediated device via its 'assign_adapter' interface.
 * Setting the bits in the AQM corresponding to the domains assigned to the
-  mediated matrix device via its 'assign_domain' interface.
+  matrix mediated device via its 'assign_domain' interface.
 * Setting the bits in the ADM corresponding to the domain dIDs assigned to the
-  mediated matrix device via its 'assign_control_domains' interface.
+  matrix mediated device via its 'assign_control_domains' interface.
+
+The linux device model precludes passing a device through to a KVM guest that
+is not bound to the device driver facilitating its pass-through. Consequently,
+an APQN that does not reference a queue device bound to the vfio_ap device
+driver will not be assigned to a KVM guest's CRYCB. The AP architecture,
+however, does not provide a means to filter individual APQNs from the guest's
+CRYCB, so the following logic is employed to filter them:
+
+* Filter the APQNs assigned to the matrix mediated device by APID.
+
+  To filter APQNs by APID, each APQN derived from the Cartesian product of the
+  adapter numbers (APID) and domain numbers (APQI) assigned to the mdev is
+  examined and if any one of them does not reference a queue device bound to the
+  vfio_ap device driver, the adapter will not be plugged into the guest (i.e.,
+  the bit corresponding to its APID will not be set in the APM of the guest's
+  CRYCB).
+
+  If at least one adapter is plugged into the guest, then all domains assigned
+  to the mdev will also be plugged into the guest (i.e., the bits corresponding
+  to the APQIs of the domains assigned to the mdev will be set in the AQM field
+  of the guest's CRYCB).
+
+* Filter the APQNs assigned to the matrix mediated device by APQI.
+
+  The APQNs will be filtered by APQI if filtering by APID does not result in any
+  adapters or domains getting plugged into the guest.
+
+  To filter APQNs by APQI, each APQN derived from the Cartesian product of the
+  adapter numbers (APID) and domain numbers (APQI) assigned to the mdev is
+  examined and if any one of them does not reference a queue device bound to the
+  vfio_ap device driver, the domain will not be plugged into the guest (i.e.,
+  the bit corresponding to its APQI will not be set in the AQM of the guest's
+  CRYCB).
+
+  If at least one domain is plugged into the guest, then all adapters assigned
+  to the mdev will also be plugged into the guest (i.e., the bits corresponding
+  to the APIDs of the adapters assigned to the mdev will be set in the APM field
+  of the guest's CRYCB).
 
 The CPU model features for AP
 -----------------------------
@@ -435,6 +481,10 @@ available to a KVM guest via the following CPU model features:
    can be made available to the guest only if it is available on the host (i.e.,
    facility bit 12 is set).
 
+4. apqi: Indicates AP queue interrupts are available on the guest. This facility
+   can be made available to the guest only if it is available on the host (i.e.,
+   facility bit 65 is set).
+
 Note: If the user chooses to specify a CPU model different than the 'host'
 model to QEMU, the CPU model features and facilities need to be turned on
 explicitly; for example::
@@ -444,7 +494,7 @@ explicitly; for example::
 A guest can be precluded from using AP features/facilities by turning them off
 explicitly; for example::
 
-     /usr/bin/qemu-system-s390x ... -cpu host,ap=off,apqci=off,apft=off
+     /usr/bin/qemu-system-s390x ... -cpu host,ap=off,apqci=off,apft=off,apqi=off
 
 Note: If the APFT facility is turned off (apft=off) for the guest, the guest
 will not see any AP devices. The zcrypt device drivers that register for type 10
@@ -530,40 +580,56 @@ These are the steps:
 
 2. Secure the AP queues to be used by the three guests so that the host can not
    access them. To secure them, there are two sysfs files that specify
-   bitmasks marking a subset of the APQN range as 'usable by the default AP
-   queue device drivers' or 'not usable by the default device drivers' and thus
-   available for use by the vfio_ap device driver'. The location of the sysfs
-   files containing the masks are::
+   bitmasks marking a subset of the APQN range as usable only by the default AP
+   queue device drivers. All remaining APQNs are available available for use by
+   any other device driver. The vfio_ap device driver is currently the only
+   non-default device driver. The location of the sysfs files containing the
+   masks are::
 
      /sys/bus/ap/apmask
      /sys/bus/ap/aqmask
 
    The 'apmask' is a 256-bit mask that identifies a set of AP adapter IDs
-   (APID). Each bit in the mask, from left to right (i.e., from most significant
-   to least significant bit in big endian order), corresponds to an APID from
-   0-255. If a bit is set, the APID is marked as usable only by the default AP
-   queue device drivers; otherwise, the APID is usable by the vfio_ap
-   device driver.
+   (APID). Each bit in the mask, from left to right corresponds to an APID from
+   0-255. If a bit is set, the APID is marked as available to the default AP
+   queue device drivers.
 
    The 'aqmask' is a 256-bit mask that identifies a set of AP queue indexes
-   (APQI). Each bit in the mask, from left to right (i.e., from most significant
-   to least significant bit in big endian order), corresponds to an APQI from
-   0-255. If a bit is set, the APQI is marked as usable only by the default AP
-   queue device drivers; otherwise, the APQI is usable by the vfio_ap device
-   driver.
+   (APQI). Each bit in the mask, from left to right corresponds to an APQI from
+   0-255. If a bit is set, the APQI is marked as available to the default AP
+   queue device drivers.
+
+   The Cartesian product of the APIDs corresponding to the bits set in the
+   apmask and the APQIs corresponding to the bits set in the aqmask comprise
+   the subset of APQNs that can be used only by the host default device drivers.
+   All other APQNs are available to the non-default device drivers such as the
+   vfio_ap driver.
+
+   Take, for example, the following masks::
+
+      apmask:
+      0x7d00000000000000000000000000000000000000000000000000000000000000
+
+      aqmask:
+      0x8000000000000000000000000000000000000000000000000000000000000000
+
+   The masks indicate:
 
-   Take, for example, the following mask::
+   * Adapters 1, 2, 3, 4, 5, and 7 are available for use by the host default
+     device drivers.
 
-      0x7dffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff
+   * Domain 0 is available for use by the host default device drivers
 
-    It indicates:
+   * The subset of APQNs available for use only by the default host device
+     drivers are:
 
-      1, 2, 3, 4, 5, and 7-255 belong to the default drivers' pool, and 0 and 6
-      belong to the vfio_ap device driver's pool.
+     (1,0), (2,0), (3,0), (4.0), (5,0) and (7,0)
+
+   * All other APQNs are available for use by the non-default device drivers.
 
    The APQN of each AP queue device assigned to the linux host is checked by the
-   AP bus against the set of APQNs derived from the cross product of APIDs
-   and APQIs marked as usable only by the default AP queue device drivers. If a
+   AP bus against the set of APQNs derived from the Cartesian product of APIDs
+   and APQIs marked as available to the default AP queue device drivers. If a
    match is detected,  only the default AP queue device drivers will be probed;
    otherwise, the vfio_ap device driver will be probed.
 
@@ -627,6 +693,16 @@ These are the steps:
 	    default drivers pool:    adapter 0-15, domain 1
 	    alternate drivers pool:  adapter 16-255, domains 0, 2-255
 
+   Note ***:
+   Changing a mask such that one or more APQNs will be taken from a matrix
+   mediated device (see below) will fail with an error (EADDRINUSE). The error
+   is logged to the kernel ring buffer which can be viewed with the 'dmesg'
+   command. The output identifies each APQN flagged as 'in use' and the matrix
+   mediated device to which it is assigned; for example:
+
+   Userspace may not re-assign queue 05.0054 already assigned to 62177883-f1bb-47f0-914d-32a22e3a8804
+   Userspace may not re-assign queue 04.0054 already assigned to cef03c3c-903d-4ecc-9a83-40694cb8aee4
+
 Securing the APQNs for our example
 ----------------------------------
    To secure the AP queues 05.0004, 05.0047, 05.00ab, 05.00ff, 06.0004, 06.0047,
@@ -684,7 +760,7 @@ Securing the APQNs for our example
 
      /sys/devices/vfio_ap/matrix/
      --- [mdev_supported_types]
-     ------ [vfio_ap-passthrough] (passthrough mediated matrix device type)
+     ------ [vfio_ap-passthrough] (passthrough matrix mediated device type)
      --------- create
      --------- [devices]
 
@@ -775,17 +851,18 @@ Securing the APQNs for our example
      higher than the maximum is specified, the operation will terminate with
      an error (ENODEV).
 
-   * All APQNs that can be derived from the adapter ID and the IDs of
-     the previously assigned domains must be bound to the vfio_ap device
-     driver. If no domains have yet been assigned, then there must be at least
-     one APQN with the specified APID bound to the vfio_ap driver. If no such
-     APQNs are bound to the driver, the operation will terminate with an
-     error (EADDRNOTAVAIL).
+   * All APQNs that can be derived from the Cartesian product of the APID of the
+     adapter being assigned and the APQIs of the previously assigned domains
+     must be available to the vfio_ap device driver as specified in the sysfs
+     /sys/bus/ap/apmask and /sys/bus/ap/aqmask attribute files. If even one APQN
+     is reserved for use by the host device driver, the operation will terminate
+     with an error (EADDRNOTAVAIL).
 
-     No APQN that can be derived from the adapter ID and the IDs of the
-     previously assigned domains can be assigned to another mediated matrix
-     device. If an APQN is assigned to another mediated matrix device, the
-     operation will terminate with an error (EADDRINUSE).
+   * No APQN that can be derived from the Cartesian product of the APID of the
+     adapter being assigned and the APQIs of the previously assigned domains can
+     be assigned to another matrix mediated device. If even one APQN is assigned
+     to another matrix mediated device, the operation will terminate with an
+     error (EADDRINUSE).
 
    In order to successfully assign a domain:
 
@@ -794,17 +871,18 @@ Securing the APQNs for our example
      higher than the maximum is specified, the operation will terminate with
      an error (ENODEV).
 
-   * All APQNs that can be derived from the domain ID and the IDs of
-     the previously assigned adapters must be bound to the vfio_ap device
-     driver. If no domains have yet been assigned, then there must be at least
-     one APQN with the specified APQI bound to the vfio_ap driver. If no such
-     APQNs are bound to the driver, the operation will terminate with an
-     error (EADDRNOTAVAIL).
+   * All APQNs that can be derived from the Cartesian product of the APQI of the
+     domain being assigned and the APIDs of the previously assigned adapters
+     must be available to the vfio_ap device driver as specified in the sysfs
+     /sys/bus/ap/apmask and /sys/bus/ap/aqmask attribute files. If even one APQN
+     is reserved for use by the host device driver, the operation will terminate
+     with an error (EADDRNOTAVAIL).
 
-     No APQN that can be derived from the domain ID and the IDs of the
-     previously assigned adapters can be assigned to another mediated matrix
-     device. If an APQN is assigned to another mediated matrix device, the
-     operation will terminate with an error (EADDRINUSE).
+   * No APQN that can be derived from the Cartesian product of the APQI of the
+     domain being assigned and the APIDs of the previously assigned adapters can
+     be assigned to another matrix mediated device. If even one APQN is assigned
+     to another matrix mediated device, the operation will terminate with an
+     error (EADDRINUSE).
 
    In order to successfully assign a control domain, the domain number
    specified must represent a value from 0 up to the maximum domain number
@@ -813,22 +891,22 @@ Securing the APQNs for our example
 
 5. Start Guest1::
 
-     /usr/bin/qemu-system-s390x ... -cpu host,ap=on,apqci=on,apft=on \
+     /usr/bin/qemu-system-s390x ... -cpu host,ap=on,apqci=on,apft=on,apqi=on \
 	-device vfio-ap,sysfsdev=/sys/devices/vfio_ap/matrix/$uuid1 ...
 
 7. Start Guest2::
 
-     /usr/bin/qemu-system-s390x ... -cpu host,ap=on,apqci=on,apft=on \
+     /usr/bin/qemu-system-s390x ... -cpu host,ap=on,apqci=on,apft=on,apqi=on \
 	-device vfio-ap,sysfsdev=/sys/devices/vfio_ap/matrix/$uuid2 ...
 
 7. Start Guest3::
 
-     /usr/bin/qemu-system-s390x ... -cpu host,ap=on,apqci=on,apft=on \
+     /usr/bin/qemu-system-s390x ... -cpu host,ap=on,apqci=on,apft=on,apqi=on \
 	-device vfio-ap,sysfsdev=/sys/devices/vfio_ap/matrix/$uuid3 ...
 
-When the guest is shut down, the mediated matrix devices may be removed.
+When the guest is shut down, the matrix mediated devices may be removed.
 
-Using our example again, to remove the mediated matrix device $uuid1::
+Using our example again, to remove the matrix mediated device $uuid1::
 
    /sys/devices/vfio_ap/matrix/
       --- [mdev_supported_types]
@@ -851,16 +929,146 @@ remove it if no guest will use it during the remaining lifetime of the linux
 host. If the mdev matrix device is removed, one may want to also reconfigure
 the pool of adapters and queues reserved for use by the default drivers.
 
+Hot plug support:
+================
+An adapter, domain or control domain may be hot plugged into a running KVM
+guest by assigning it to the matrix mediated device being used by the guest.
+Control domains will always be hot plugged; however, an adapter or domain will
+be hot plugged only if each new APQN resulting from its assignment
+references a queue device bound to the vfio_ap device driver as described
+below.
+
+When an adapter is assigned to a matrix mediated device in use by a KVM guest:
+
+* If no domains have yet been plugged into the KVM guest:
+
+  Hot plug the adapter and every domain previously assigned to the mdev if each
+  APQN derived from the Cartesian product of the APID of the adapter being
+  assigned and the APQIs of the domains previously assigned references a queue
+  device bound to the vfio_ap device driver.
+
+* If one or more domains have previously been plugged into the guest:
+
+  Hot plug the adapter if each APQN derived from the Cartesian product of the
+  APID of the adapter being assigned and the APQIs of the domains already
+  plugged into the guest references a queue device bound to the vfio_ap device
+  driver.
+
+When a domain is assigned to a matrix mediated device in use by a KVM guest:
+
+* If no adapters have yet been plugged into the KVM guest:
+
+  Hot plug the domain and every adapter previously assigned to the mdev if each
+  APQN derived from the Cartesian product of the APIDs of the adapters
+  previously assigned and the APQI of the domain being assigned references a
+  queue device bound to the vfio_ap device driver.
+
+* If one or more adapters have previously been plugged into the guest:
+
+  Hot plug the domain if each APQN derived from the Cartesian product of the
+  APIDs of the adapters already plugged into the guest and the APQI of the
+  domain being assigned references a queue device bound to the vfio_ap device
+  driver.
+
+Over-provisioning of AP queues for a KVM guest:
+==============================================
+Over-provisioning is defined herein as the assignment of adapters or domains to
+a matrix mediated device that do not reference AP devices in the host's AP
+configuration. The idea here is that when the adapter or domain becomes
+available, it will be automatically hot-plugged into the KVM guest using
+the matrix mediated device to which it is assigned as long as each new APQN
+resulting from plugging it in references a queue device bound to the vfio_ap
+device driver.
+
 Limitations
 ===========
-* The KVM/kernel interfaces do not provide a way to prevent restoring an APQN
-  to the default drivers pool of a queue that is still assigned to a mediated
-  device in use by a guest. It is incumbent upon the administrator to
-  ensure there is no mediated device in use by a guest to which the APQN is
-  assigned lest the host be given access to the private data of the AP queue
-  device such as a private key configured specifically for the guest.
+Live guest migration is not supported for guests using AP devices without
+intervention by a system administrator. Before a KVM guest can be migrated,
+the matrix mediated device must be removed. Unfortunately, it can not be
+removed manually (i.e., echo 1 > /sys/devices/vfio_ap/matrix/$UUID/remove) while
+the mdev is in use by a KVM guest. If the guest is being emulated by QEMU,
+its mdev can be hot unplugged from the guest in one of two ways:
+
+1. If the KVM guest was started with libvirt, you can hot unplug the mdev via
+   the following commands:
+
+      virsh detach-device <guestname> <path-to-device-xml>
+
+      For example, to hot unplug mdev 62177883-f1bb-47f0-914d-32a22e3a8804 from
+      the guest named 'my-guest':
+
+         virsh detach-device my-guest ~/config/my-guest-hostdev.xml
+
+            The contents of my-guest-hostdev.xml:
+
+            <hostdev mode='subsystem' type='mdev' managed='no' model='vfio-ap'>
+              <source>
+                <address uuid='62177883-f1bb-47f0-914d-32a22e3a8804'/>
+              </source>
+            </hostdev>
+
+
+      virsh qemu-monitor-command <guest-name> --hmp "device-del <device-id>"
+
+      For example, to hot unplug the matrix mediated device identified on the
+      qemu command line with 'id=hostdev0' from the guest named 'my-guest':
+
+         virsh qemu-monitor-command my-guest --hmp "device_del hostdev0"
+
+2. A matrix mediated device can be hot unplugged by attaching the qemu monitor
+   to the guest and using the following qemu monitor command:
+
+      (QEMU) device-del id=<device-id>
+
+      For example, to hot unplug the matrix mediated device that was specified
+      on the qemu command line with 'id=hostdev0' when the guest was started:
+
+         (QEMU) device-del id=hostdev0
+
+After live migration of the KVM guest completes, an AP configuration can be
+restored to the KVM guest by hot plugging a matrix mediated device on the target
+system into the guest in one of two ways:
+
+1. If the KVM guest was started with libvirt, you can hot plug a matrix mediated
+   device into the guest via the following virsh commands:
+
+   virsh attach-device <guestname> <path-to-device-xml>
+
+      For example, to hot plug mdev 62177883-f1bb-47f0-914d-32a22e3a8804 into
+      the guest named 'my-guest':
+
+         virsh attach-device my-guest ~/config/my-guest-hostdev.xml
+
+            The contents of my-guest-hostdev.xml:
+
+            <hostdev mode='subsystem' type='mdev' managed='no' model='vfio-ap'>
+              <source>
+                <address uuid='62177883-f1bb-47f0-914d-32a22e3a8804'/>
+              </source>
+            </hostdev>
+
+
+   virsh qemu-monitor-command <guest-name> --hmp \
+   "device_add vfio-ap,sysfsdev=<path-to-mdev>,id=<device-id>"
+
+      For example, to hot plug the matrix mediated device
+      62177883-f1bb-47f0-914d-32a22e3a8804 into the guest named 'my-guest' with
+      device-id hostdev0:
+
+      virsh qemu-monitor-command my-guest --hmp \
+      "device_add vfio-ap,\
+      sysfsdev=/sys/devices/vfio_ap/matrix/62177883-f1bb-47f0-914d-32a22e3a8804,\
+      id=hostdev0"
+
+2. A matrix mediated device can be hot plugged by attaching the qemu monitor
+   to the guest and using the following qemu monitor command:
+
+      (qemu) device_add "vfio-ap,sysfsdev=<path-to-mdev>,id=<device-id>"
 
-* Dynamically modifying the AP matrix for a running guest (which would amount to
-  hot(un)plug of AP devices for the guest) is currently not supported
+      For example, to plug the matrix mediated device 
+      62177883-f1bb-47f0-914d-32a22e3a8804 into the guest with the device-id
+      hostdev0:
 
-* Live guest migration is not supported for guests using AP devices.
+         (QEMU) device-add "vfio-ap,\
+         sysfsdev=/sys/devices/vfio_ap/matrix/62177883-f1bb-47f0-914d-32a22e3a8804,\
+         id=hostdev0"
\ No newline at end of file
-- 
2.21.1

Powered by blists - more mailing lists