linux-kernel - Re: [PATCH v6 5/6] PCI: uniphier: Add iATU register support

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <ab0f7338-045c-8565-134b-757769c9235f@socionext.com>
Date:   Fri, 21 Aug 2020 16:05:16 +0900
From:   Kunihiko Hayashi <hayashi.kunihiko@...ionext.com>
To:     Rob Herring <robh+dt@...nel.org>
Cc:     Lorenzo Pieralisi <lorenzo.pieralisi@....com>,
        Bjorn Helgaas <bhelgaas@...gle.com>,
        Jingoo Han <jingoohan1@...il.com>,
        Gustavo Pimentel <gustavo.pimentel@...opsys.com>,
        Masahiro Yamada <yamada.masahiro@...ionext.com>,
        Marc Zyngier <maz@...nel.org>, PCI <linux-pci@...r.kernel.org>,
        devicetree@...r.kernel.org,
        "moderated list:ARM/FREESCALE IMX / MXC ARM ARCHITECTURE" 
        <linux-arm-kernel@...ts.infradead.org>,
        "linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
        Masami Hiramatsu <masami.hiramatsu@...aro.org>,
        Jassi Brar <jaswinder.singh@...aro.org>
Subject: Re: [PATCH v6 5/6] PCI: uniphier: Add iATU register support

On 2020/08/18 1:48, Rob Herring wrote:
> On Fri, Aug 7, 2020 at 4:25 AM Kunihiko Hayashi
> <hayashi.kunihiko@...ionext.com> wrote:
>>
>> This gets iATU register area from reg property. In Synopsys DWC version
>> 4.80 or later, since iATU register area is separated from core register
>> area, this area is necessary to get from DT independently.
>>
>> Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@...ionext.com>
>> ---
>>   drivers/pci/controller/dwc/pcie-uniphier.c | 5 +++++
>>   1 file changed, 5 insertions(+)
>>
>> diff --git a/drivers/pci/controller/dwc/pcie-uniphier.c b/drivers/pci/controller/dwc/pcie-uniphier.c
>> index 55a7166..93ef608 100644
>> --- a/drivers/pci/controller/dwc/pcie-uniphier.c
>> +++ b/drivers/pci/controller/dwc/pcie-uniphier.c
>> @@ -471,6 +471,11 @@ static int uniphier_pcie_probe(struct platform_device *pdev)
>>          if (IS_ERR(priv->pci.dbi_base))
>>                  return PTR_ERR(priv->pci.dbi_base);
>>
>> +       priv->pci.atu_base =
>> +               devm_platform_ioremap_resource_byname(pdev, "atu");
>> +       if (IS_ERR(priv->pci.atu_base))
>> +               priv->pci.atu_base = NULL;
> 
> Keystone has the same 'atu' resource setup. Please move its code to
> the DW core and use that.

There are some platforms that pci.atu_base is set by other way.
The 'atu' code shouldn't be conflicted with the following existing code.

   drivers/pci/controller/dwc/pci-keystone.c:              atu_base = devm_platform_ioremap_resource_byname(pdev, "atu");
   drivers/pci/controller/dwc/pci-keystone.c:              pci->atu_base = atu_base;
   drivers/pci/controller/dwc/pcie-designware.c:                   pci->atu_base = pci->dbi_base + DEFAULT_DBI_ATU_OFFSET;
   drivers/pci/controller/dwc/pcie-intel-gw.c:     pci->atu_base = pci->dbi_base + data->pcie_atu_offset;
   drivers/pci/controller/dwc/pcie-tegra194.c:     pci->atu_base = devm_ioremap_resource(dev, atu_dma_res);

So I'm not sure where to move the code in the DW core.
Is there any idea?

Thank you,

---
Best Regards
Kunihiko Hayashi