[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <CAPDyKFq79ZdseQkgP9XxwdmQTBzMsfRPz54663njXrbzKgsFxg@mail.gmail.com>
Date: Fri, 21 Aug 2020 15:03:19 +0200
From: Ulf Hansson <ulf.hansson@...aro.org>
To: Faiz Abbas <faiz_abbas@...com>
Cc: Linux Kernel Mailing List <linux-kernel@...r.kernel.org>,
DTML <devicetree@...r.kernel.org>,
"linux-mmc@...r.kernel.org" <linux-mmc@...r.kernel.org>,
Rob Herring <robh+dt@...nel.org>
Subject: Re: [PATCH] dt-bindings: mmc: sdhci-am654: Document bindings for the
host controllers on TI's J7200 devices
On Sun, 2 Aug 2020 at 09:01, Faiz Abbas <faiz_abbas@...com> wrote:
>
> Add binding documentation for mmc host controllers present on
> TI's J7200 SOC
>
> Signed-off-by: Faiz Abbas <faiz_abbas@...com>
Applied for next, thanks!
Kind regards
Uffe
> ---
> Documentation/devicetree/bindings/mmc/sdhci-am654.txt | 6 +++++-
> 1 file changed, 5 insertions(+), 1 deletion(-)
>
> diff --git a/Documentation/devicetree/bindings/mmc/sdhci-am654.txt b/Documentation/devicetree/bindings/mmc/sdhci-am654.txt
> index 6d202f4d9249..b49cbfdd679f 100644
> --- a/Documentation/devicetree/bindings/mmc/sdhci-am654.txt
> +++ b/Documentation/devicetree/bindings/mmc/sdhci-am654.txt
> @@ -12,6 +12,8 @@ Required Properties:
> "ti,am654-sdhci-5.1": SDHCI on AM654 device.
> "ti,j721e-sdhci-8bit": 8 bit SDHCI on J721E device.
> "ti,j721e-sdhci-4bit": 4 bit SDHCI on J721E device.
> + "ti,j7200-sdhci-8bit": 8 bit SDHCI on J7200 device.
> + "ti,j7200-sdhci-4bit": 4 bit SDHCI on J7200 device.
> - reg: Must be two entries.
> - The first should be the sdhci register space
> - The second should the subsystem/phy register space
> @@ -33,7 +35,9 @@ Required Properties:
> These bindings must be provided otherwise the driver will disable the
> corresponding speed mode (i.e. all nodes must provide at least -legacy)
>
> -Optional Properties (Required for ti,am654-sdhci-5.1 and ti,j721e-sdhci-8bit):
> +Optional Properties (Required for ti,am654-sdhci-5.1,
> + ti,j721e-sdhci-8bit,
> + ti,j7200-sdhci-8bit):
> - ti,trm-icp: DLL trim select
> - ti,driver-strength-ohm: driver strength in ohms.
> Valid values are 33, 40, 50, 66 and 100 ohms.
> --
> 2.17.1
>
Powered by blists - more mailing lists