linux-kernel - [PATCH 5/5] arm64: dts: imx8mq-thor96: Replace deprecated phy reset properties

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite for Android: free password hash cracker in your pocket

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20200823111508.1165-5-krzk@kernel.org>
Date:   Sun, 23 Aug 2020 13:15:08 +0200
From:   Krzysztof Kozlowski <krzk@...nel.org>
To:     Rob Herring <robh+dt@...nel.org>, Shawn Guo <shawnguo@...nel.org>,
        Sascha Hauer <s.hauer@...gutronix.de>,
        Pengutronix Kernel Team <kernel@...gutronix.de>,
        Fabio Estevam <festevam@...il.com>,
        NXP Linux Team <linux-imx@....com>,
        devicetree@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
        linux-kernel@...r.kernel.org
Cc:     Krzysztof Kozlowski <krzk@...nel.org>
Subject: [PATCH 5/5] arm64: dts: imx8mq-thor96: Replace deprecated phy reset properties

Use preferred properties of phy node instead of deprecated
phy-reset-gpios (and others).  This avoids copying deprecated code into
future DTSes.

Signed-off-by: Krzysztof Kozlowski <krzk@...nel.org>

---

Not tested on HW.
---
 arch/arm64/boot/dts/freescale/imx8mq-thor96.dts | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/freescale/imx8mq-thor96.dts b/arch/arm64/boot/dts/freescale/imx8mq-thor96.dts
index b4795a032fa2..5d5aa6537225 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq-thor96.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mq-thor96.dts
@@ -122,7 +122,6 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_fec1>;
 	phy-mode = "rgmii-id";
-	phy-reset-gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
 	phy-handle = <&ethphy>;
 	fsl,magic-packet;
 	status = "okay";
@@ -134,6 +133,7 @@
 		ethphy: ethernet-phy@3 {
 			compatible = "ethernet-phy-ieee802.3-c22";
 			reg = <3>;
+			reset-gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
 		};
 	};
 };
-- 
2.17.1