[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20200824190701.8447-6-krzk@kernel.org>
Date: Mon, 24 Aug 2020 21:06:51 +0200
From: Krzysztof Kozlowski <krzk@...nel.org>
To: Lee Jones <lee.jones@...aro.org>, Rob Herring <robh+dt@...nel.org>,
Miquel Raynal <miquel.raynal@...tlin.com>,
Richard Weinberger <richard@....at>,
Vignesh Raghavendra <vigneshr@...com>,
Shawn Guo <shawnguo@...nel.org>,
Sascha Hauer <s.hauer@...gutronix.de>,
Pengutronix Kernel Team <kernel@...gutronix.de>,
Fabio Estevam <festevam@...il.com>,
NXP Linux Team <linux-imx@....com>,
Adam Ford <aford173@...il.com>,
Daniel Baluta <daniel.baluta@....com>,
Anson Huang <Anson.Huang@....com>,
Robin Gong <yibin.gong@....com>, Li Jun <jun.li@....com>,
Matti Vaittinen <matti.vaittinen@...rohmeurope.com>,
Han Xu <han.xu@....com>, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, linux-mtd@...ts.infradead.org,
linux-arm-kernel@...ts.infradead.org
Cc: Krzysztof Kozlowski <krzk@...nel.org>
Subject: [PATCH 06/16] arm64: dts: imx8mm-evk: Add 32.768 kHz clock to PMIC
The ROHM BD71847 PMIC has a 32.768 kHz clock. Adding necessary parent
allows to probe the bd718x7 clock driver fixing boot errors:
bd718xx-clk bd71847-clk.1.auto: No parent clk found
bd718xx-clk: probe of bd71847-clk.1.auto failed with error -22
Signed-off-by: Krzysztof Kozlowski <krzk@...nel.org>
---
arch/arm64/boot/dts/freescale/imx8mm-evk.dts | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-evk.dts b/arch/arm64/boot/dts/freescale/imx8mm-evk.dts
index 3cb8b6bcb657..0115f07bbc9d 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-evk.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mm-evk.dts
@@ -149,6 +149,10 @@
interrupts = <3 GPIO_ACTIVE_LOW>;
rohm,reset-snvs-powered;
+ #clock-cells = <0>;
+ clocks = <&osc_32k 0>;
+ clock-output-names = "clk-32k-out";
+
regulators {
buck1_reg: BUCK1 {
regulator-name = "buck1";
--
2.17.1
Powered by blists - more mailing lists