[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <68f20a2b2bb0feee80bc3348619c2ee98aa69963.1598263539.git.michal.simek@xilinx.com>
Date: Mon, 24 Aug 2020 12:05:42 +0200
From: Michal Simek <michal.simek@...inx.com>
To: linux-kernel@...r.kernel.org, monstr@...str.eu,
michal.simek@...inx.com, git@...inx.com
Cc: Kalyani Akula <kalyani.akula@...inx.com>,
Krzysztof Kozlowski <krzk@...nel.org>,
Laurent Pinchart <laurent.pinchart@...asonboard.com>,
Manish Narani <manish.narani@...inx.com>,
Michael Tretter <m.tretter@...gutronix.de>,
Nava kishore Manne <nava.manne@...inx.com>,
Rajan Vaja <rajan.vaja@...inx.com>,
Rob Herring <robh+dt@...nel.org>, devicetree@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org
Subject: [PATCH] arm64: dts: zynqmp: Rename buses to be align with simple-bus yaml
Rename amba-apu and amba to AXI. Based on Xilinx ZynqMP TRM (Chapter 15)
chip is "using the advanced eXtensible interface (AXI) point-to-point
channels for communicating addresses, data, and response transactions
between master and slave clients."
Issues are reported as:
...: amba: $nodename:0: 'amba' does not match
'^([a-z][a-z0-9\\-]+-bus|bus|soc|axi|ahb|apb)(@[0-9a-f]+)?$'
From schema: .../dt-schema/dtschema/schemas/simple-bus.yaml
...: amba-apu@0: $nodename:0: 'amba-apu@0' does not match
'^([a-z][a-z0-9\\-]+-bus|bus|soc|axi|ahb|apb)(@[0-9a-f]+)?$'
From schema: .../dt-schema/dtschema/schemas/simple-bus.yaml
Signed-off-by: Michal Simek <michal.simek@...inx.com>
---
The only one problem with this patch is that it breaks paths in
/proc/device-tree/.
---
arch/arm64/boot/dts/xilinx/zynqmp.dtsi | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp.dtsi b/arch/arm64/boot/dts/xilinx/zynqmp.dtsi
index 165a95a106c8..98073f3223e5 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp.dtsi
+++ b/arch/arm64/boot/dts/xilinx/zynqmp.dtsi
@@ -182,7 +182,7 @@ fpga_full: fpga-full {
ranges;
};
- amba_apu: amba-apu@0 {
+ amba_apu: axi@0 {
compatible = "simple-bus";
#address-cells = <2>;
#size-cells = <1>;
@@ -201,7 +201,7 @@ gic: interrupt-controller@...10000 {
};
};
- amba: amba {
+ amba: axi {
compatible = "simple-bus";
#address-cells = <2>;
#size-cells = <2>;
--
2.28.0
Powered by blists - more mailing lists