lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Date:   Tue, 25 Aug 2020 22:30:15 +0530
From:   Faiz Abbas <faiz_abbas@...com>
To:     <linux-kernel@...r.kernel.org>, <linux-mmc@...r.kernel.org>,
        <linux-arm-kernel@...ts.infradead.org>
CC:     <ulf.hansson@...aro.org>, <adrian.hunter@...el.com>,
        <faiz_abbas@...com>
Subject: [PATCH v2] mmc: sdhci_am654: Add workaround for card detect debounce timer

There is a one time delay because of a card detect debounce timer in the
controller IP. This timer runs as soon as power is applied to the module
regardless of whether a card is present or not and any writes to
SDHCI_POWER_ON will return 0 before it expires. This timeout has been
measured to be about 1 second in am654x and j721e.

Write-and-read-back in a loop on SDHCI_POWER_ON for a maximum of
1.5 seconds to make sure that the controller actually powers on.

Signed-off-by: Faiz Abbas <faiz_abbas@...com>
---

v2: Use read_poll_timeout() standard macro

 drivers/mmc/host/sdhci_am654.c | 24 ++++++++++++++++++++++++
 1 file changed, 24 insertions(+)

diff --git a/drivers/mmc/host/sdhci_am654.c b/drivers/mmc/host/sdhci_am654.c
index f9d24af12396..9a048c80dad4 100644
--- a/drivers/mmc/host/sdhci_am654.c
+++ b/drivers/mmc/host/sdhci_am654.c
@@ -6,6 +6,7 @@
  *
  */
 #include <linux/clk.h>
+#include <linux/iopoll.h>
 #include <linux/of.h>
 #include <linux/module.h>
 #include <linux/pm_runtime.h>
@@ -272,9 +273,19 @@ static void sdhci_j721e_4bit_set_clock(struct sdhci_host *host,
 	sdhci_set_clock(host, clock);
 }
 
+static u8 sdhci_am654_write_power_on(struct sdhci_host *host, u8 val, int reg)
+{
+	writeb(val, host->ioaddr + reg);
+	usleep_range(1000, 10000);
+	return readb(host->ioaddr + reg);
+}
+
+#define MAX_POWER_ON_TIMEOUT	1500000 /* us */
 static void sdhci_am654_write_b(struct sdhci_host *host, u8 val, int reg)
 {
 	unsigned char timing = host->mmc->ios.timing;
+	u8 pwr;
+	int ret;
 
 	if (reg == SDHCI_HOST_CONTROL) {
 		switch (timing) {
@@ -291,6 +302,19 @@ static void sdhci_am654_write_b(struct sdhci_host *host, u8 val, int reg)
 	}
 
 	writeb(val, host->ioaddr + reg);
+	if (reg == SDHCI_POWER_CONTROL && (val & SDHCI_POWER_ON)) {
+		/*
+		 * Power on will not happen until the card detect debounce
+		 * timer expires. Wait at least 1.5 seconds for the power on
+		 * bit to be set
+		 */
+		ret = read_poll_timeout(sdhci_am654_write_power_on, pwr,
+					pwr & SDHCI_POWER_ON, 0,
+					MAX_POWER_ON_TIMEOUT, false, host, val,
+					reg);
+		if (ret)
+			dev_warn(mmc_dev(host->mmc), "Power on failed\n");
+	}
 }
 
 static int sdhci_am654_execute_tuning(struct mmc_host *mmc, u32 opcode)
-- 
2.17.1

Powered by blists - more mailing lists