linux-kernel - [PATCH 4/6] phy: phy-qcom-apq8064-sata: convert to readl_relaxed_poll

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:   Tue, 25 Aug 2020 10:03:05 +0800
From:   Chunfeng Yun <chunfeng.yun@...iatek.com>
To:     Kishon Vijay Abraham I <kishon@...com>
CC:     Vinod Koul <vkoul@...nel.org>, Andy Gross <agross@...nel.org>,
        Bjorn Andersson <bjorn.andersson@...aro.org>,
        Matthias Brugger <matthias.bgg@...il.com>,
        Chunfeng Yun <chunfeng.yun@...iatek.com>,
        Rikard Falkeborn <rikard.falkeborn@...il.com>,
        Bharat Gooty <bharat.gooty@...adcom.com>,
        Rayagonda Kokatanur <rayagonda.kokatanur@...adcom.com>,
        <linux-kernel@...r.kernel.org>, <linux-arm-msm@...r.kernel.org>,
        <linux-arm-kernel@...ts.infradead.org>,
        <linux-mediatek@...ts.infradead.org>
Subject: [PATCH 4/6] phy: phy-qcom-apq8064-sata: convert to readl_relaxed_poll_timeout()

Use readl_relaxed_poll_timeout() to simplify code, rename local function
read_poll_timeout() as poll_timeout() to avoid repeated definition

Signed-off-by: Chunfeng Yun <chunfeng.yun@...iatek.com>
---
 drivers/phy/qualcomm/phy-qcom-apq8064-sata.c | 21 ++++++++-------------
 1 file changed, 8 insertions(+), 13 deletions(-)

diff --git a/drivers/phy/qualcomm/phy-qcom-apq8064-sata.c b/drivers/phy/qualcomm/phy-qcom-apq8064-sata.c
index febe0ae..ce91ae7 100644
--- a/drivers/phy/qualcomm/phy-qcom-apq8064-sata.c
+++ b/drivers/phy/qualcomm/phy-qcom-apq8064-sata.c
@@ -4,6 +4,7 @@
  */
 
 #include <linux/io.h>
+#include <linux/iopoll.h>
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/of.h>
@@ -72,18 +73,12 @@ struct qcom_apq8064_sata_phy {
 };
 
 /* Helper function to do poll and timeout */
-static int read_poll_timeout(void __iomem *addr, u32 mask)
+static int poll_timeout(void __iomem *addr, u32 mask)
 {
-	unsigned long timeout = jiffies + msecs_to_jiffies(TIMEOUT_MS);
+	u32 val;
 
-	do {
-		if (readl_relaxed(addr) & mask)
-			return 0;
-
-		usleep_range(DELAY_INTERVAL_US, DELAY_INTERVAL_US + 50);
-	} while (!time_after(jiffies, timeout));
-
-	return (readl_relaxed(addr) & mask) ? 0 : -ETIMEDOUT;
+	return readl_relaxed_poll_timeout(addr, val, (val & mask),
+					DELAY_INTERVAL_US, TIMEOUT_MS * 1000);
 }
 
 static int qcom_apq8064_sata_phy_init(struct phy *generic_phy)
@@ -137,21 +132,21 @@ static int qcom_apq8064_sata_phy_init(struct phy *generic_phy)
 	writel_relaxed(0x05, base + UNIPHY_PLL_LKDET_CFG2);
 
 	/* PLL Lock wait */
-	ret = read_poll_timeout(base + UNIPHY_PLL_STATUS, UNIPHY_PLL_LOCK);
+	ret = poll_timeout(base + UNIPHY_PLL_STATUS, UNIPHY_PLL_LOCK);
 	if (ret) {
 		dev_err(phy->dev, "poll timeout UNIPHY_PLL_STATUS\n");
 		return ret;
 	}
 
 	/* TX Calibration */
-	ret = read_poll_timeout(base + SATA_PHY_TX_IMCAL_STAT, SATA_PHY_TX_CAL);
+	ret = poll_timeout(base + SATA_PHY_TX_IMCAL_STAT, SATA_PHY_TX_CAL);
 	if (ret) {
 		dev_err(phy->dev, "poll timeout SATA_PHY_TX_IMCAL_STAT\n");
 		return ret;
 	}
 
 	/* RX Calibration */
-	ret = read_poll_timeout(base + SATA_PHY_RX_IMCAL_STAT, SATA_PHY_RX_CAL);
+	ret = poll_timeout(base + SATA_PHY_RX_IMCAL_STAT, SATA_PHY_RX_CAL);
 	if (ret) {
 		dev_err(phy->dev, "poll timeout SATA_PHY_RX_IMCAL_STAT\n");
 		return ret;
-- 
1.9.1