| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1598321228-21093-3-git-send-email-cang@codeaurora.org>
Date: Mon, 24 Aug 2020 19:07:06 -0700
From: Can Guo <cang@...eaurora.org>
To: asutoshd@...eaurora.org, nguyenb@...eaurora.org,
hongwus@...eaurora.org, rnayak@...eaurora.org,
linux-scsi@...r.kernel.org, kernel-team@...roid.com,
saravanak@...gle.com, salyzyn@...gle.com, cang@...eaurora.org
Cc: Alim Akhtar <alim.akhtar@...sung.com>,
Avri Altman <avri.altman@....com>,
"James E.J. Bottomley" <jejb@...ux.ibm.com>,
"Martin K. Petersen" <martin.petersen@...cle.com>,
Stanley Chu <stanley.chu@...iatek.com>,
Bean Huo <beanhuo@...ron.com>,
Bart Van Assche <bvanassche@....org>,
Satya Tangirala <satyat@...gle.com>,
Venkat Gopalakrishnan <venkatg@...eaurora.org>,
Kiwoong Kim <kwmad.kim@...sung.com>,
linux-kernel@...r.kernel.org (open list)
Subject: [PATCH v1 2/2] scsi: ufs: Handle LINERESET indication in err handler
PA Layer issues a LINERESET to the PHY at the recovery step in the Power
Mode change operation. If it happens during auto or mannual hibern8 enter,
even if hibern8 enter succeeds, UFS power mode shall be set to PWM-G1 mode
and kept in that mode after exit from hibern8, leading to bad performance.
Handle the LINERESET in the eh_work by restoring power mode to HS mode
after all pending reqs and tasks are cleared from doorbell.
Signed-off-by: Can Guo <cang@...eaurora.org>
---
drivers/scsi/ufs/ufshcd.c | 111 ++++++++++++++++++++++++++++++++++++++++------
drivers/scsi/ufs/ufshcd.h | 2 +
drivers/scsi/ufs/ufshci.h | 1 +
drivers/scsi/ufs/unipro.h | 3 ++
4 files changed, 103 insertions(+), 14 deletions(-)
diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c
index 000895f..8cc127d 100644
--- a/drivers/scsi/ufs/ufshcd.c
+++ b/drivers/scsi/ufs/ufshcd.c
@@ -143,6 +143,7 @@ enum {
UFSHCD_UIC_NL_ERROR = (1 << 3), /* Network layer error */
UFSHCD_UIC_TL_ERROR = (1 << 4), /* Transport Layer error */
UFSHCD_UIC_DME_ERROR = (1 << 5), /* DME error */
+ UFSHCD_UIC_PA_GENERIC_ERROR = (1 << 6), /* Generic PA error */
};
#define ufshcd_set_eh_in_progress(h) \
@@ -4066,7 +4067,8 @@ static int ufshcd_change_power_mode(struct ufs_hba *hba,
int ret;
/* if already configured to the requested pwr_mode */
- if (pwr_mode->gear_rx == hba->pwr_info.gear_rx &&
+ if (!hba->force_pmc &&
+ pwr_mode->gear_rx == hba->pwr_info.gear_rx &&
pwr_mode->gear_tx == hba->pwr_info.gear_tx &&
pwr_mode->lane_rx == hba->pwr_info.lane_rx &&
pwr_mode->lane_tx == hba->pwr_info.lane_tx &&
@@ -4494,6 +4496,8 @@ static int ufshcd_link_startup(struct ufs_hba *hba)
if (ret)
goto out;
+ /* Clear UECPA once due to LINERESET has happened during LINK_STARTUP */
+ ufshcd_readl(hba, REG_UIC_ERROR_CODE_PHY_ADAPTER_LAYER);
ret = ufshcd_make_hba_operational(hba);
out:
if (ret) {
@@ -5650,6 +5654,22 @@ static inline void ufshcd_recover_pm_error(struct ufs_hba *hba)
}
#endif
+static bool ufshcd_is_pwr_mode_restore_needed(struct ufs_hba *hba)
+{
+ struct ufs_pa_layer_attr *pwr_info = &hba->pwr_info;
+ u32 mode;
+
+ ufshcd_dme_get(hba, UIC_ARG_MIB(PA_PWRMODE), &mode);
+
+ if (pwr_info->pwr_rx != ((mode >> PWRMODE_RX_OFFSET) & PWRMODE_MASK))
+ return true;
+
+ if (pwr_info->pwr_tx != (mode & PWRMODE_MASK))
+ return true;
+
+ return false;
+}
+
/**
* ufshcd_err_handler - handle UFS errors that require s/w attention
* @work: pointer to work structure
@@ -5660,9 +5680,9 @@ static void ufshcd_err_handler(struct work_struct *work)
unsigned long flags;
bool err_xfer = false;
bool err_tm = false;
- int err = 0;
+ int err = 0, pmc_err;
int tag;
- bool needs_reset = false;
+ bool needs_reset = false, needs_restore = false;
hba = container_of(work, struct ufs_hba, eh_work);
@@ -5710,8 +5730,9 @@ static void ufshcd_err_handler(struct work_struct *work)
UFSHCD_UIC_DL_TCx_REPLAY_ERROR))))
needs_reset = true;
- if (hba->saved_err & (INT_FATAL_ERRORS | UIC_ERROR |
- UFSHCD_UIC_HIBERN8_MASK)) {
+ if ((hba->saved_err & (INT_FATAL_ERRORS | UFSHCD_UIC_HIBERN8_MASK)) ||
+ (hba->saved_uic_err &&
+ (hba->saved_uic_err != UFSHCD_UIC_PA_GENERIC_ERROR))) {
bool pr_prdt = !!(hba->saved_err & SYSTEM_BUS_FATAL_ERROR);
spin_unlock_irqrestore(hba->host->host_lock, flags);
@@ -5729,8 +5750,25 @@ static void ufshcd_err_handler(struct work_struct *work)
* host reset and restore
*/
if (needs_reset)
- goto skip_pending_xfer_clear;
+ goto do_reset;
+ /*
+ * If LINERESET was caught, UFS might have been put to PWM mode,
+ * check if power mode restore is needed.
+ */
+ if (hba->saved_uic_err & UFSHCD_UIC_PA_GENERIC_ERROR) {
+ hba->saved_uic_err &= ~UFSHCD_UIC_PA_GENERIC_ERROR;
+ if (!hba->saved_uic_err)
+ hba->saved_err &= ~UIC_ERROR;
+ spin_unlock_irqrestore(hba->host->host_lock, flags);
+ if (ufshcd_is_pwr_mode_restore_needed(hba))
+ needs_restore = true;
+ spin_lock_irqsave(hba->host->host_lock, flags);
+ if (!hba->saved_err && !needs_restore)
+ goto skip_err_handling;
+ }
+
+ hba->silence_err_logs = true;
/* release lock as clear command might sleep */
spin_unlock_irqrestore(hba->host->host_lock, flags);
/* Clear pending transfer requests */
@@ -5754,11 +5792,38 @@ static void ufshcd_err_handler(struct work_struct *work)
/* Complete the requests that are cleared by s/w */
ufshcd_complete_requests(hba);
+ hba->silence_err_logs = false;
- if (err_xfer || err_tm)
+ if (err_xfer || err_tm) {
needs_reset = true;
+ goto do_reset;
+ }
-skip_pending_xfer_clear:
+ /*
+ * After all reqs and tasks are cleared from doorbell,
+ * now it is safe to retore power mode.
+ */
+ if (needs_restore) {
+ spin_unlock_irqrestore(hba->host->host_lock, flags);
+ /*
+ * Hold the scaling lock just in case dev cmds
+ * are sent via bsg and/or sysfs.
+ */
+ down_write(&hba->clk_scaling_lock);
+ hba->force_pmc = true;
+ pmc_err = ufshcd_config_pwr_mode(hba, &(hba->pwr_info));
+ if (pmc_err) {
+ needs_reset = true;
+ dev_err(hba->dev, "%s: Failed to restore power mode, err = %d\n",
+ __func__, pmc_err);
+ }
+ hba->force_pmc = false;
+ ufshcd_print_pwr_info(hba);
+ up_write(&hba->clk_scaling_lock);
+ spin_lock_irqsave(hba->host->host_lock, flags);
+ }
+
+do_reset:
/* Fatal errors need reset */
if (needs_reset) {
unsigned long max_doorbells = (1UL << hba->nutrs) - 1;
@@ -5814,17 +5879,33 @@ static irqreturn_t ufshcd_update_uic_error(struct ufs_hba *hba)
u32 reg;
irqreturn_t retval = IRQ_NONE;
- /* PHY layer lane error */
+ /* PHY layer error */
reg = ufshcd_readl(hba, REG_UIC_ERROR_CODE_PHY_ADAPTER_LAYER);
- /* Ignore LINERESET indication, as this is not an error */
if ((reg & UIC_PHY_ADAPTER_LAYER_ERROR) &&
- (reg & UIC_PHY_ADAPTER_LAYER_LANE_ERR_MASK)) {
+ (reg & UIC_PHY_ADAPTER_LAYER_ERROR_CODE_MASK)) {
+ ufshcd_update_reg_hist(&hba->ufs_stats.pa_err, reg);
/*
* To know whether this error is fatal or not, DB timeout
* must be checked but this error is handled separately.
*/
- dev_dbg(hba->dev, "%s: UIC Lane error reported\n", __func__);
- ufshcd_update_reg_hist(&hba->ufs_stats.pa_err, reg);
+ if (reg & UIC_PHY_ADAPTER_LAYER_LANE_ERR_MASK)
+ dev_dbg(hba->dev, "%s: UIC Lane error reported\n",
+ __func__);
+
+ /* Got a LINERESET indication. */
+ if (reg & UIC_PHY_ADAPTER_LAYER_GENERIC_ERROR) {
+ struct uic_command *cmd = NULL;
+
+ hba->uic_error |= UFSHCD_UIC_PA_GENERIC_ERROR;
+ if (hba->uic_async_done && hba->active_uic_cmd)
+ cmd = hba->active_uic_cmd;
+ /*
+ * Ignore the LINERESET during power mode change
+ * operation via DME_SET command.
+ */
+ if (cmd && (cmd->command == UIC_CMD_DME_SET))
+ hba->uic_error &= ~UFSHCD_UIC_PA_GENERIC_ERROR;
+ }
retval |= IRQ_HANDLED;
}
@@ -5941,7 +6022,9 @@ static irqreturn_t ufshcd_check_errors(struct ufs_hba *hba)
hba->saved_uic_err |= hba->uic_error;
/* dump controller state before resetting */
- if (hba->saved_err & (INT_FATAL_ERRORS | UIC_ERROR)) {
+ if ((hba->saved_err & (INT_FATAL_ERRORS)) ||
+ (hba->saved_uic_err &&
+ (hba->saved_uic_err != UFSHCD_UIC_PA_GENERIC_ERROR))) {
dev_err(hba->dev, "%s: saved_err 0x%x saved_uic_err 0x%x\n",
__func__, hba->saved_err,
hba->saved_uic_err);
diff --git a/drivers/scsi/ufs/ufshcd.h b/drivers/scsi/ufs/ufshcd.h
index 618b253..8817103 100644
--- a/drivers/scsi/ufs/ufshcd.h
+++ b/drivers/scsi/ufs/ufshcd.h
@@ -629,6 +629,7 @@ struct ufs_hba_variant_params {
* @saved_err: sticky error mask
* @saved_uic_err: sticky UIC error mask
* @force_reset: flag to force eh_work perform a full reset
+ * @force_pmc: flag to force a power mode change
* @silence_err_logs: flag to silence error logs
* @dev_cmd: ufs device management command information
* @last_dme_cmd_tstamp: time stamp of the last completed DME command
@@ -728,6 +729,7 @@ struct ufs_hba {
u32 saved_uic_err;
struct ufs_stats ufs_stats;
bool force_reset;
+ bool force_pmc;
bool silence_err_logs;
/* Device management request data */
diff --git a/drivers/scsi/ufs/ufshci.h b/drivers/scsi/ufs/ufshci.h
index ba31b09..6795e1f 100644
--- a/drivers/scsi/ufs/ufshci.h
+++ b/drivers/scsi/ufs/ufshci.h
@@ -171,6 +171,7 @@ enum {
#define UIC_PHY_ADAPTER_LAYER_ERROR 0x80000000
#define UIC_PHY_ADAPTER_LAYER_ERROR_CODE_MASK 0x1F
#define UIC_PHY_ADAPTER_LAYER_LANE_ERR_MASK 0xF
+#define UIC_PHY_ADAPTER_LAYER_GENERIC_ERROR 0x10
/* UECDL - Host UIC Error Code Data Link Layer 3Ch */
#define UIC_DATA_LINK_LAYER_ERROR 0x80000000
diff --git a/drivers/scsi/ufs/unipro.h b/drivers/scsi/ufs/unipro.h
index 4ee6478..f6b52ce 100644
--- a/drivers/scsi/ufs/unipro.h
+++ b/drivers/scsi/ufs/unipro.h
@@ -205,6 +205,9 @@ enum {
UNCHANGED = 7,
};
+#define PWRMODE_MASK 0xF
+#define PWRMODE_RX_OFFSET 4
+
/* PA TX/RX Frequency Series */
enum {
PA_HS_MODE_A = 1,
--
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, a Linux Foundation Collaborative Project.
Powered by blists - more mailing lists