lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Date:   Mon, 24 Aug 2020 18:59:10 +0200
From:   Maxime Ripard <maxime@...no.tech>
To:     Kévin L'hôpital <kevin.lhopital@...tlin.com>
Cc:     linux-media@...r.kernel.org, mchehab@...nel.org,
        robh+dt@...nel.org, mark.rutland@....com, wens@...e.org,
        yong.deng@...ewell.com, p.zabel@...gutronix.de,
        devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
        linux-arm-kernel@...ts.infradead.org,
        paul.kocialkowski@...tlin.com, thomas.petazzoni@...tlin.com
Subject: Re: [PATCH 2/7] dt-bindings: media: i2c: Add documentation for ov8865

Hi,

On Fri, Aug 21, 2020 at 04:59:30PM +0200, Kévin L'hôpital wrote:
> Add a documentation for the sensor ov8865 from Omnivision.
> 
> Signed-off-by: Kévin L'hôpital <kevin.lhopital@...tlin.com>

In order to ease the submission of both drivers, you should probably
split this series into two, one with the MIPI-CSI driver, and one with
the ov8865 driver.

> ---
>  .../devicetree/bindings/media/i2c/ov8865.txt  | 51 +++++++++++++++++++
>  1 file changed, 51 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/media/i2c/ov8865.txt
> 
> diff --git a/Documentation/devicetree/bindings/media/i2c/ov8865.txt b/Documentation/devicetree/bindings/media/i2c/ov8865.txt
> new file mode 100644
> index 000000000000..ac5a662288de
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/media/i2c/ov8865.txt
> @@ -0,0 +1,51 @@
> +* Omnivision OV8865 MIPI CSI-2
> +
> +Required Properties:
> +- compatible: should be "ovti,ov8865"
> +- clocks: reference to the xclk input clock.
> +- clock-names: should be "xclk".
> +- DOVDD-supply: Digital I/O voltage supply, 2.8 volts
> +- AVDD-supply: Analog voltage supply, 2.8 volts
> +- AFVDD-supply: Analog voltage supply, 2.8 volts
> +- DVDD-supply: Digital core voltage supply, 1.2 volts
> +- reset-gpios: reference to the GPIO connected to the reset pin.
> +	       This is an active low signal to the OV8865.
> +- powerdown-gpios: reference to the GPIO connected to the powerdown pin.
> +		   This is an active low signal to the OV8865.
> +- rotation: as defined in
> +	    Documentation/devicetree/bindings/media/video-interfaces.txt,
> +	    valid values are 0 (sensor mounted upright) and 180 (sensor
> +	    mounted upside down).
> +- remote-endpoint: a phandle to the bus receiver's endpoint node.
> +- clock-lanes: should be set to <0> (clock lane on hardware lane 0).
> +- data-lanes: should be set to <4> (four CSI-2 lanes supported).
> +
> +The device node must contain one 'port' child node for its digital output video
> +port, in accordance with the video interface bindings defined in
> +Documentation/devicetree/bindings/media/video-interfaces.txt.

Free form DT documentation is deprecated nowadays, you should be doing a
YAML schema instead (like the ov8856 driver).

Maxime

Download attachment "signature.asc" of type "application/pgp-signature" (229 bytes)

Powered by blists - more mailing lists