| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <CANLsYkybyfayh7aKd75=omjJk76MuyZJ0N1=5-O76YmFjYVaFQ@mail.gmail.com>
Date: Tue, 25 Aug 2020 08:36:40 -0600
From: Mathieu Poirier <mathieu.poirier@...aro.org>
To: Arnaud POULIQUEN <arnaud.pouliquen@...com>
Cc: Bjorn Andersson <bjorn.andersson@...aro.org>,
Ohad Ben-Cohen <ohad@...ery.com>,
"linux-remoteproc@...r.kernel.org" <linux-remoteproc@...r.kernel.org>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
"linux-stm32@...md-mailman.stormreply.com"
<linux-stm32@...md-mailman.stormreply.com>
Subject: Re: [PATCH 5/9] rpmsg: introduce reserved rpmsg driver for ns announcement
On Tue, 25 Aug 2020 at 05:57, Arnaud POULIQUEN <arnaud.pouliquen@...com> wrote:
>
> Hi Mathieu
>
> Thanks for the review! please find few comments below.
>
> On 8/25/20 12:47 AM, Mathieu Poirier wrote:
> > On Fri, Jul 31, 2020 at 01:47:28PM +0200, Arnaud Pouliquen wrote:
> >> The name service announcement should not be linked to the RPMsg virtio bus
> >> but to the RPMsg protocol itself.
> >>
> >> This patch proposes to break the dependency with the RPmsg virtio bus by
> >> the introduction of the reserved RPMsg name service driver which will be in
> >> charge of managing the RPMsg name service announcement.
> >>
> >> This first patch only implements the probe and the RPMsg endpoint to
> >> manage create and release channels remote requests.
> >>
> >> Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@...com>
> >> ---
> >> drivers/rpmsg/Kconfig | 8 ++
> >> drivers/rpmsg/Makefile | 1 +
> >> drivers/rpmsg/rpmsg_internal.h | 17 +++++
> >> drivers/rpmsg/rpmsg_ns.c | 135 +++++++++++++++++++++++++++++++++
> >> 4 files changed, 161 insertions(+)
> >> create mode 100644 drivers/rpmsg/rpmsg_ns.c
> >>
> >> diff --git a/drivers/rpmsg/Kconfig b/drivers/rpmsg/Kconfig
> >> index f96716893c2a..140faa975ea1 100644
> >> --- a/drivers/rpmsg/Kconfig
> >> +++ b/drivers/rpmsg/Kconfig
> >> @@ -15,6 +15,14 @@ config RPMSG_CHAR
> >> in /dev. They make it possible for user-space programs to send and
> >> receive rpmsg packets.
> >>
> >> +config RPMSG_NS
> >> + tristate "RPMSG name service announcement"
> >> + depends on RPMSG
> >> + help
> >> + Say Y here to enable the support of the name service announcement
> >> + channel that probes the associate RPMsg device on remote endpoint
> >
> > s/associate/associated
> >
> >> + service announcement.
> >> +
> >> config RPMSG_MTK_SCP
> >> tristate "MediaTek SCP"
> >> depends on MTK_SCP
> >> diff --git a/drivers/rpmsg/Makefile b/drivers/rpmsg/Makefile
> >> index ffe932ef6050..8d452656f0ee 100644
> >> --- a/drivers/rpmsg/Makefile
> >> +++ b/drivers/rpmsg/Makefile
> >> @@ -1,6 +1,7 @@
> >> # SPDX-License-Identifier: GPL-2.0
> >> obj-$(CONFIG_RPMSG) += rpmsg_core.o
> >> obj-$(CONFIG_RPMSG_CHAR) += rpmsg_char.o
> >> +obj-$(CONFIG_RPMSG_NS) += rpmsg_ns.o
> >> obj-$(CONFIG_RPMSG_MTK_SCP) += mtk_rpmsg.o
> >> qcom_glink-objs := qcom_glink_native.o qcom_glink_ssr.o
> >> obj-$(CONFIG_RPMSG_QCOM_GLINK) += qcom_glink.o
> >> diff --git a/drivers/rpmsg/rpmsg_internal.h b/drivers/rpmsg/rpmsg_internal.h
> >> index d5ab286d0e5e..641b48f6bf2a 100644
> >> --- a/drivers/rpmsg/rpmsg_internal.h
> >> +++ b/drivers/rpmsg/rpmsg_internal.h
> >> @@ -102,4 +102,21 @@ static inline int rpmsg_chrdev_register_device(struct rpmsg_device *rpdev)
> >> return rpmsg_register_device(rpdev);
> >> }
> >>
> >> +/**
> >> + * rpmsg_ns_register_device() - register name service device based on rpdev
> >> + * @rpdev: prepared rpdev to be used for creating endpoints
> >> + *
> >> + * This function wraps rpmsg_register_device() preparing the rpdev for use as
> >> + * basis for the rpmsg name service device.
> >> + */
> >> +static inline int rpmsg_ns_register_device(struct rpmsg_device *rpdev)
> >> +{
> >> + strcpy(rpdev->id.name, "rpmsg_ns");
> >> + rpdev->driver_override = "rpmsg_ns";
> >> + rpdev->src = RPMSG_NS_ADDR;
> >> + rpdev->dst = RPMSG_NS_ADDR;
> >> +
> >> + return rpmsg_register_device(rpdev);
> >> +}
> >> +
> >> #endif
> >> diff --git a/drivers/rpmsg/rpmsg_ns.c b/drivers/rpmsg/rpmsg_ns.c
> >> new file mode 100644
> >> index 000000000000..fe7713e737c2
> >> --- /dev/null
> >> +++ b/drivers/rpmsg/rpmsg_ns.c
> >> @@ -0,0 +1,135 @@
> >> +// SPDX-License-Identifier: GPL-2.0
> >> +/*
> >> + * Copyright (C) STMicroelectronics 2020 - All Rights Reserved
> >> + */
> >> +#include <linux/device.h>
> >> +#include <linux/kernel.h>
> >> +#include <linux/module.h>
> >> +#include <linux/slab.h>
> >> +#include "rpmsg_internal.h"
> >> +
> >> +/**
> >> + * enum rpmsg_ns_flags - dynamic name service announcement flags
> >> + *
> >> + * @RPMSG_NS_CREATE: a new remote service was just created
> >> + * @RPMSG_NS_DESTROY: a known remote service was just destroyed
> >> + */
> >> +enum rpmsg_ns_flags {
> >> + RPMSG_NS_CREATE = 0,
> >> + RPMSG_NS_DESTROY = 1,
> >> +};
> >> +
> >> +/**
> >> + * struct rpmsg_ns_msg - dynamic name service announcement message
> >> + * @name: name of remote service that is published
> >> + * @addr: address of remote service that is published
> >> + * @flags: indicates whether service is created or destroyed
> >> + *
> >> + * This message is sent across to publish a new service, or announce
> >> + * about its removal. When we receive these messages, an appropriate
> >> + * rpmsg channel (i.e device) is created/destroyed. In turn, the ->probe()
> >> + * or ->remove() handler of the appropriate rpmsg driver will be invoked
> >> + * (if/as-soon-as one is registered).
> >> + */
> >> +struct rpmsg_ns_msg {
> >> + char name[RPMSG_NAME_SIZE];
> >> + u32 addr;
> >> + u32 flags;
> >> +} __packed;
> >> +
> >> +/* invoked when a name service announcement arrives */
> >> +static int rpmsg_ns_cb(struct rpmsg_device *rpdev, void *data, int len,
> >> + void *priv, u32 src)
> >> +{
> >> + struct rpmsg_ns_msg *msg = data;
> >> + struct rpmsg_device *newch;
> >> + struct rpmsg_channel_info chinfo;
> >> + struct device *dev = &rpdev->dev;
> >> + int ret;
> >> +
> >> +#if defined(CONFIG_DYNAMIC_DEBUG)
> >> + dynamic_hex_dump("NS announcement: ", DUMP_PREFIX_NONE, 16, 1,
> >> + data, len, true);
> >> +#endif
> >> +
> >> + if (len != sizeof(*msg)) {
> >> + dev_err(dev, "malformed ns msg (%d)\n", len);
> >> + return -EINVAL;
> >> + }
> >> +
> >> + /* don't trust the remote processor for null terminating the name */
> >> + msg->name[RPMSG_NAME_SIZE - 1] = '\0';
> >> +
> >> + strncpy(chinfo.name, msg->name, sizeof(chinfo.name));
> >> + chinfo.src = RPMSG_ADDR_ANY;
> >> + chinfo.dst = msg->addr;
> >> +
> >> + dev_info(dev, "%sing channel %s addr 0x%x\n",
> >> + msg->flags & RPMSG_NS_DESTROY ? "destroy" : "creat",
> >> + msg->name, msg->addr);
> >> +
> >> + if (msg->flags & RPMSG_NS_DESTROY) {
> >> + ret = rpmsg_release_channel(rpdev, &chinfo);
> >> + if (ret)
> >> + dev_err(dev, "rpmsg_destroy_channel failed: %d\n", ret);
> >> + } else {
> >> + newch = rpmsg_create_channel(rpdev, &chinfo);
> >> + if (!newch)
> >> + dev_err(dev, "rpmsg_create_channel failed\n");
> >> + }
> >> +
> >> + return 0;
> >> +}
> >> +
> >> +static int rpmsg_ns_probe(struct rpmsg_device *rpdev)
> >> +{
> >> + struct rpmsg_channel_info ns_chinfo;
> >> + struct rpmsg_endpoint *ns_ept;
> >> +
> >> + ns_chinfo.src = RPMSG_NS_ADDR;
> >> + ns_chinfo.dst = RPMSG_NS_ADDR;
> >> + strcpy(ns_chinfo.name, "name_service");
> >> +
> >> + /*
> >> + * create and attach the endpoint to the rpmsg device that it would be
> >> + * destroy when the rpmsg device will be deleted
> >> + */
> >
> > This comment doesn't work, please revise.
>
> Could you clarify what does not work, from your POV?
> in view of your comment, it seems I should at least rephrase it...
> proposal:
> /*
> * Create the NS service endpoint associated to the rpmsg device.
> * The endpoint will be automatically destroyed when the rpmsg device
> * will be deleted.
> */
Yes, now it is perfectly clear - thanks for revisiting.
>
> >
> >> + ns_ept = rpmsg_create_ept(rpdev, rpmsg_ns_cb, NULL, ns_chinfo);
> >> + if (!ns_ept) {
> >> + dev_err(&rpdev->dev, "failed to create the ns ept\n");
> >> + return -ENOMEM;
> >> + }
> >> + rpdev->ept = ns_ept;
> >> +
> >> + rpdev->src = RPMSG_NS_ADDR;
> >
> > I think this is already done in rpmsg_ns_register_device().
>
> You are right!
>
> thanks,
> Arnaud
> >
> >> +
> >> + return 0;
> >> +}
> >> +
> >> +static struct rpmsg_driver rpmsg_ns_driver = {
> >> + .drv.name = "rpmsg_ns",
> >> + .probe = rpmsg_ns_probe,
> >> +};
> >> +
> >> +static int rpmsg_ns_init(void)
> >> +{
> >> + int ret;
> >> +
> >> + ret = register_rpmsg_driver(&rpmsg_ns_driver);
> >> + if (ret < 0)
> >> + pr_err("%s: Failed to register rpmsg driver\n", __func__);
> >> +
> >> + return ret;
> >> +}
> >> +postcore_initcall(rpmsg_ns_init);
> >> +
> >> +static void rpmsg_ns_exit(void)
> >> +{
> >> + unregister_rpmsg_driver(&rpmsg_ns_driver);
> >> +}
> >> +module_exit(rpmsg_ns_exit);
> >> +
> >> +MODULE_DESCRIPTION("Name service announcement rpmsg Driver");
> >> +MODULE_AUTHOR("Arnaud Pouliquen <arnaud.pouliquen@...com>");
> >> +MODULE_ALIAS("rpmsg_ns");
> >> +MODULE_LICENSE("GPL v2");
> >> --
> >> 2.17.1
> >>
Powered by blists - more mailing lists