| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20200826202149.174815-1-linus.walleij@linaro.org>
Date: Wed, 26 Aug 2020 22:21:49 +0200
From: Linus Walleij <linus.walleij@...aro.org>
To: lee.jones@...aro.org, linux-kernel@...r.kernel.org
Cc: Linus Walleij <linus.walleij@...aro.org>,
Sekhar Nori <nsekhar@...com>,
Bartosz Golaszewski <bgolaszewski@...libre.com>
Subject: [PATCH v2] mfd: dm355evm_msp: Convert LEDs to GPIO descriptor table
This converts the DaVinci DM355EVM LEDs to use GPIO
descriptor look-ups.
Cc: Sekhar Nori <nsekhar@...com>
Cc: Bartosz Golaszewski <bgolaszewski@...libre.com>
Signed-off-by: Linus Walleij <linus.walleij@...aro.org>
---
ChangeLog v1->v2:
- Moved out all the tables and device definition to the top
of the file to not have static locals inside the function.
---
drivers/mfd/dm355evm_msp.c | 76 +++++++++++++++++++++++++-------------
1 file changed, 50 insertions(+), 26 deletions(-)
diff --git a/drivers/mfd/dm355evm_msp.c b/drivers/mfd/dm355evm_msp.c
index 151c36ce7343..54fb6cbd2aa0 100644
--- a/drivers/mfd/dm355evm_msp.c
+++ b/drivers/mfd/dm355evm_msp.c
@@ -12,6 +12,7 @@
#include <linux/module.h>
#include <linux/err.h>
#include <linux/gpio.h>
+#include <linux/gpio/machine.h>
#include <linux/leds.h>
#include <linux/i2c.h>
#include <linux/mfd/dm355evm_msp.h>
@@ -116,6 +117,54 @@ static const u8 msp_gpios[] = {
MSP_GPIO(4, SDMMC), MSP_GPIO(3, SDMMC), /* mmc1 WP, nCD */
};
+static struct gpio_led evm_leds[] = {
+ { .name = "dm355evm::ds14",
+ .default_trigger = "heartbeat", },
+ { .name = "dm355evm::ds15",
+ .default_trigger = "mmc0", },
+ { .name = "dm355evm::ds16",
+ /* could also be a CE-ATA drive */
+ .default_trigger = "mmc1", },
+ { .name = "dm355evm::ds17",
+ .default_trigger = "nand-disk", },
+ { .name = "dm355evm::ds18", },
+ { .name = "dm355evm::ds19", },
+ { .name = "dm355evm::ds20", },
+ { .name = "dm355evm::ds21", },
+};
+
+static struct gpio_led_platform_data evm_led_data = {
+ .num_leds = ARRAY_SIZE(evm_leds),
+ .leds = evm_leds,
+};
+
+static struct gpiod_lookup_table evm_leds_gpio_table = {
+ .dev_id = "leds-gpio",
+ .table = {
+ /*
+ * These GPIOs are on the dm355evm_msp
+ * GPIO chip at index 0..7
+ */
+ GPIO_LOOKUP_IDX("dm355evm_msp", 0, NULL,
+ 0, GPIO_ACTIVE_LOW),
+ GPIO_LOOKUP_IDX("dm355evm_msp", 1, NULL,
+ 1, GPIO_ACTIVE_LOW),
+ GPIO_LOOKUP_IDX("dm355evm_msp", 2, NULL,
+ 2, GPIO_ACTIVE_LOW),
+ GPIO_LOOKUP_IDX("dm355evm_msp", 3, NULL,
+ 3, GPIO_ACTIVE_LOW),
+ GPIO_LOOKUP_IDX("dm355evm_msp", 4, NULL,
+ 4, GPIO_ACTIVE_LOW),
+ GPIO_LOOKUP_IDX("dm355evm_msp", 5, NULL,
+ 5, GPIO_ACTIVE_LOW),
+ GPIO_LOOKUP_IDX("dm355evm_msp", 6, NULL,
+ 6, GPIO_ACTIVE_LOW),
+ GPIO_LOOKUP_IDX("dm355evm_msp", 7, NULL,
+ 7, GPIO_ACTIVE_LOW),
+ { },
+ },
+};
+
#define MSP_GPIO_REG(offset) (msp_gpios[(offset)] >> 3)
#define MSP_GPIO_MASK(offset) BIT(msp_gpios[(offset)] & 0x07)
@@ -260,32 +309,7 @@ static int add_children(struct i2c_client *client)
/* LED output */
if (msp_has_leds()) {
-#define GPIO_LED(l) .name = l, .active_low = true
- static struct gpio_led evm_leds[] = {
- { GPIO_LED("dm355evm::ds14"),
- .default_trigger = "heartbeat", },
- { GPIO_LED("dm355evm::ds15"),
- .default_trigger = "mmc0", },
- { GPIO_LED("dm355evm::ds16"),
- /* could also be a CE-ATA drive */
- .default_trigger = "mmc1", },
- { GPIO_LED("dm355evm::ds17"),
- .default_trigger = "nand-disk", },
- { GPIO_LED("dm355evm::ds18"), },
- { GPIO_LED("dm355evm::ds19"), },
- { GPIO_LED("dm355evm::ds20"), },
- { GPIO_LED("dm355evm::ds21"), },
- };
-#undef GPIO_LED
-
- struct gpio_led_platform_data evm_led_data = {
- .num_leds = ARRAY_SIZE(evm_leds),
- .leds = evm_leds,
- };
-
- for (i = 0; i < ARRAY_SIZE(evm_leds); i++)
- evm_leds[i].gpio = i + dm355evm_msp_gpio.base;
-
+ gpiod_add_lookup_table(&evm_leds_gpio_table);
/* NOTE: these are the only fully programmable LEDs
* on the board, since GPIO-61/ds22 (and many signals
* going to DC7) must be used for AEMIF address lines
--
2.26.2
Powered by blists - more mailing lists