| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20200826204251.5082-3-andreas@kemnade.info>
Date: Wed, 26 Aug 2020 22:42:51 +0200
From: Andreas Kemnade <andreas@...nade.info>
To: robh+dt@...nel.org, shawnguo@...nel.org, s.hauer@...gutronix.de,
kernel@...gutronix.de, festevam@...il.com, linux-imx@....com,
andreas@...nade.info, Anson.Huang@....com,
marcel.ziswiler@...adex.com, sebastien.szymanski@...adeus.com,
michael@...le.cc, rjones@...eworks.com, leoyang.li@....com,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org, j.neuschaefer@....net,
letux-kernel@...nphoenux.org
Subject: [PATCH v2 2/2] ARM: dts: imx: add devicetree for Tolino Shine 2 HD
This adds a devicetree for the Tolino Shine 2 HD Ebook reader. It is based
on boards marked with "37NB-E60QF0+4A2". It is equipped with an i.MX6SL
SoC.
Expected to work:
- Buttons
- Wifi
- Touchscreen
- LED
- uSD
- USB
- RTC
Not working due to missing drivers:
- Backlight (requires NTXEC driver)
- EPD
Not working due to unknown reasons:
- deep sleep (echo standby >/sys/power/state works),
wakeup fails when imx_gpc_pre_suspend(true) was called.
Signed-off-by: Andreas Kemnade <andreas@...nade.info>
---
Changes in v2:
- better comments about internals
- avoid confusion about polarity of wifi enable pin
- newline cleanup
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/imx6sl-tolino-shine2hd.dts | 588 +++++++++++++++++++
2 files changed, 589 insertions(+)
create mode 100644 arch/arm/boot/dts/imx6sl-tolino-shine2hd.dts
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index e6a1cac0bfc7..c65fa3852246 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -581,6 +581,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \
imx6qp-zii-rdu2.dtb
dtb-$(CONFIG_SOC_IMX6SL) += \
imx6sl-evk.dtb \
+ imx6sl-tolino-shine2hd.dtb \
imx6sl-tolino-shine3.dtb \
imx6sl-warp.dtb
dtb-$(CONFIG_SOC_IMX6SLL) += \
diff --git a/arch/arm/boot/dts/imx6sl-tolino-shine2hd.dts b/arch/arm/boot/dts/imx6sl-tolino-shine2hd.dts
new file mode 100644
index 000000000000..caa279608803
--- /dev/null
+++ b/arch/arm/boot/dts/imx6sl-tolino-shine2hd.dts
@@ -0,0 +1,588 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device tree for the Tolino Shine 2 HD ebook reader
+ *
+ * Name on mainboard is: 37NB-E60QF0+4A2 or 37NB-E60QF0+4A3
+ * Serials start with: E60QF2
+ *
+ * Copyright 2020 Andreas Kemnade
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
+#include "imx6sl.dtsi"
+
+/ {
+ model = "Tolino Shine 2 HD";
+ compatible = "kobo,tolino-shine2hd", "fsl,imx6sl";
+
+ chosen {
+ stdout-path = &uart1;
+ };
+
+ gpio_keys: gpio-keys {
+ compatible = "gpio-keys";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gpio_keys>;
+
+ cover {
+ label = "Cover";
+ gpios = <&gpio5 12 GPIO_ACTIVE_LOW>;
+ linux,code = <SW_LID>;
+ linux,input-type = <EV_SW>;
+ wakeup-source;
+ };
+
+ fl {
+ label = "Frontlight";
+ gpios = <&gpio3 26 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_BRIGHTNESS_CYCLE>;
+ };
+
+ home {
+ label = "Home";
+ gpios = <&gpio3 25 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_HOME>;
+ };
+
+ power {
+ label = "Power";
+ gpios = <&gpio5 8 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_POWER>;
+ wakeup-source;
+ };
+ };
+
+ leds: leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_led>;
+
+ on {
+ label = "tolinoshine2hd:white:on";
+ gpios = <&gpio5 13 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "timer";
+ };
+ };
+
+ memory@...00000 {
+ device_type = "memory";
+ reg = <0x80000000 0x20000000>;
+ };
+
+ reg_wifi: regulator-wifi {
+ compatible = "regulator-fixed";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_wifi_power>;
+ regulator-name = "SD3_SPWR";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ gpio = <&gpio4 29 GPIO_ACTIVE_LOW>;
+ };
+
+ wifi_pwrseq: wifi_pwrseq {
+ compatible = "mmc-pwrseq-simple";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_wifi_reset>;
+ post-power-on-delay-ms = <20>;
+ reset-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
+ };
+};
+
+&i2c1 {
+ pinctrl-names = "default","sleep";
+ pinctrl-0 = <&pinctrl_i2c1>;
+ pinctrl-1 = <&pinctrl_i2c1_sleep>;
+ status = "okay";
+
+ /* TODO: embedded controller at 0x43 (driver missing) */
+
+};
+
+&i2c2 {
+ pinctrl-names = "default","sleep";
+ pinctrl-0 = <&pinctrl_i2c2>;
+ pinctrl-1 = <&pinctrl_i2c2_sleep>;
+ clock-frequency = <100000>;
+ status = "okay";
+
+ zforce: touchscreen@50 {
+ compatible = "neonode,zforce";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_zforce>;
+ reg = <0x50>;
+ interrupt-parent = <&gpio5>;
+ interrupts = <6 IRQ_TYPE_EDGE_FALLING>;
+ vdd-supply = <&ldo1_reg>;
+ reset-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>;
+ x-size = <1072>;
+ y-size = <1448>;
+ };
+
+ /* TODO: TPS65185 PMIC for E Ink at 0x68 */
+
+};
+
+&i2c3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c3>;
+ clock-frequency = <400000>;
+ status = "okay";
+
+ ricoh619: pmic@32 {
+ compatible = "ricoh,rc5t619";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ricoh_gpio>;
+ reg = <0x32>;
+ interrupt-parent = <&gpio5>;
+ interrupts = <11 IRQ_TYPE_EDGE_FALLING>;
+ system-power-controller;
+
+ regulators {
+ dcdc1_reg: DCDC1 {
+ regulator-name = "DCDC1";
+ regulator-min-microvolt = <300000>;
+ regulator-max-microvolt = <1875000>;
+ regulator-always-on;
+ regulator-boot-on;
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-max-microvolt = <900000>;
+ regulator-suspend-min-microvolt = <900000>;
+ };
+ };
+
+ /* Core3_3V3 */
+ dcdc2_reg: DCDC2 {
+ regulator-name = "DCDC2";
+ regulator-always-on;
+ regulator-boot-on;
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-max-microvolt = <3100000>;
+ regulator-suspend-min-microvolt = <3100000>;
+ };
+ };
+
+ dcdc3_reg: DCDC3 {
+ regulator-name = "DCDC3";
+ regulator-min-microvolt = <300000>;
+ regulator-max-microvolt = <1875000>;
+ regulator-always-on;
+ regulator-boot-on;
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-max-microvolt = <1140000>;
+ regulator-suspend-min-microvolt = <1140000>;
+ };
+ };
+
+ /* Core4_1V2 */
+ dcdc4_reg: DCDC4 {
+ regulator-name = "DCDC4";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+ regulator-boot-on;
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-max-microvolt = <1140000>;
+ regulator-suspend-min-microvolt = <1140000>;
+ };
+ };
+
+ /* Core4_1V8 */
+ dcdc5_reg: DCDC5 {
+ regulator-name = "DCDC5";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-max-microvolt = <1700000>;
+ regulator-suspend-min-microvolt = <1700000>;
+ };
+ };
+
+ /* IR_3V3 */
+ ldo1_reg: LDO1 {
+ regulator-name = "LDO1";
+ regulator-boot-on;
+ };
+
+ /* Core1_3V3 */
+ ldo2_reg: LDO2 {
+ regulator-name = "LDO2";
+ regulator-always-on;
+ regulator-boot-on;
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-max-microvolt = <3000000>;
+ regulator-suspend-min-microvolt = <3000000>;
+ };
+ };
+
+ /* Core5_1V2 */
+ ldo3_reg: LDO3 {
+ regulator-name = "LDO3";
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ ldo4_reg: LDO4 {
+ regulator-name = "LDO4";
+ regulator-boot-on;
+ };
+
+ /* SPD_3V3 */
+ ldo5_reg: LDO5 {
+ regulator-name = "LDO5";
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ /* DDR_0V6 */
+ ldo6_reg: LDO6 {
+ regulator-name = "LDO6";
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ /* VDD_PWM */
+ ldo7_reg: LDO7 {
+ regulator-name = "LDO7";
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ /* ldo_1v8 */
+ ldo8_reg: LDO8 {
+ regulator-name = "LDO8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ ldo9_reg: LDO9 {
+ regulator-name = "LDO9";
+ regulator-boot-on;
+ };
+
+ ldo10_reg: LDO10 {
+ regulator-name = "LDO10";
+ regulator-boot-on;
+ };
+
+ ldortc1_reg: LDORTC1 {
+ regulator-name = "LDORTC1";
+ regulator-always-on;
+ regulator-boot-on;
+ };
+ };
+ };
+};
+
+&iomuxc {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_hog>;
+
+ pinctrl_gpio_keys: gpio-keysgrp {
+ fsl,pins = <
+ MX6SL_PAD_SD1_DAT1__GPIO5_IO08 0x17059
+ MX6SL_PAD_SD1_DAT4__GPIO5_IO12 0x17059
+ MX6SL_PAD_KEY_COL1__GPIO3_IO26 0x17059
+ MX6SL_PAD_KEY_ROW0__GPIO3_IO25 0x17059
+ >;
+ };
+
+ pinctrl_hog: hoggrp {
+ fsl,pins = <
+ MX6SL_PAD_LCD_DAT0__GPIO2_IO20 0x79
+ MX6SL_PAD_LCD_DAT1__GPIO2_IO21 0x79
+ MX6SL_PAD_LCD_DAT2__GPIO2_IO22 0x79
+ MX6SL_PAD_LCD_DAT3__GPIO2_IO23 0x79
+ MX6SL_PAD_LCD_DAT4__GPIO2_IO24 0x79
+ MX6SL_PAD_LCD_DAT5__GPIO2_IO25 0x79
+ MX6SL_PAD_LCD_DAT6__GPIO2_IO26 0x79
+ MX6SL_PAD_LCD_DAT7__GPIO2_IO27 0x79
+ MX6SL_PAD_LCD_DAT8__GPIO2_IO28 0x79
+ MX6SL_PAD_LCD_DAT9__GPIO2_IO29 0x79
+ MX6SL_PAD_LCD_DAT10__GPIO2_IO30 0x79
+ MX6SL_PAD_LCD_DAT11__GPIO2_IO31 0x79
+ MX6SL_PAD_LCD_DAT12__GPIO3_IO00 0x79
+ MX6SL_PAD_LCD_DAT13__GPIO3_IO01 0x79
+ MX6SL_PAD_LCD_DAT14__GPIO3_IO02 0x79
+ MX6SL_PAD_LCD_DAT15__GPIO3_IO03 0x79
+ MX6SL_PAD_LCD_DAT16__GPIO3_IO04 0x79
+ MX6SL_PAD_LCD_DAT17__GPIO3_IO05 0x79
+ MX6SL_PAD_LCD_DAT18__GPIO3_IO06 0x79
+ MX6SL_PAD_LCD_DAT19__GPIO3_IO07 0x79
+ MX6SL_PAD_LCD_DAT20__GPIO3_IO08 0x79
+ MX6SL_PAD_LCD_DAT21__GPIO3_IO09 0x79
+ MX6SL_PAD_LCD_DAT22__GPIO3_IO10 0x79
+ MX6SL_PAD_LCD_DAT23__GPIO3_IO11 0x79
+ MX6SL_PAD_LCD_CLK__GPIO2_IO15 0x79
+ MX6SL_PAD_LCD_ENABLE__GPIO2_IO16 0x79
+ MX6SL_PAD_LCD_HSYNC__GPIO2_IO17 0x79
+ MX6SL_PAD_LCD_VSYNC__GPIO2_IO18 0x79
+ MX6SL_PAD_LCD_RESET__GPIO2_IO19 0x79
+ MX6SL_PAD_KEY_COL3__GPIO3_IO30 0x79
+ MX6SL_PAD_KEY_ROW7__GPIO4_IO07 0x79
+ MX6SL_PAD_ECSPI2_MOSI__GPIO4_IO13 0x79
+ MX6SL_PAD_KEY_COL5__GPIO4_IO02 0x79
+ MX6SL_PAD_KEY_ROW6__GPIO4_IO05 0x79
+ >;
+ };
+
+ pinctrl_i2c1: i2c1grp {
+ fsl,pins = <
+ MX6SL_PAD_I2C1_SCL__I2C1_SCL 0x4001f8b1
+ MX6SL_PAD_I2C1_SDA__I2C1_SDA 0x4001f8b1
+ >;
+ };
+
+ pinctrl_i2c1_sleep: i2c1grp-sleep {
+ fsl,pins = <
+ MX6SL_PAD_I2C1_SCL__I2C1_SCL 0x400108b1
+ MX6SL_PAD_I2C1_SDA__I2C1_SDA 0x400108b1
+ >;
+ };
+
+ pinctrl_i2c2: i2c2grp {
+ fsl,pins = <
+ MX6SL_PAD_I2C2_SCL__I2C2_SCL 0x4001f8b1
+ MX6SL_PAD_I2C2_SDA__I2C2_SDA 0x4001f8b1
+ >;
+ };
+
+ pinctrl_i2c2_sleep: i2c2grp-sleep {
+ fsl,pins = <
+ MX6SL_PAD_I2C2_SCL__I2C2_SCL 0x400108b1
+ MX6SL_PAD_I2C2_SDA__I2C2_SDA 0x400108b1
+ >;
+ };
+
+ pinctrl_i2c3: i2c3grp {
+ fsl,pins = <
+ MX6SL_PAD_REF_CLK_24M__I2C3_SCL 0x4001f8b1
+ MX6SL_PAD_REF_CLK_32K__I2C3_SDA 0x4001f8b1
+ >;
+ };
+
+ pinctrl_led: ledgrp {
+ fsl,pins = <
+ MX6SL_PAD_SD1_DAT2__GPIO5_IO13 0x17059
+ >;
+ };
+
+ pinctrl_ricoh_gpio: ricoh_gpiogrp {
+ fsl,pins = <
+ MX6SL_PAD_SD1_CLK__GPIO5_IO15 0x1b8b1 /* ricoh619 chg */
+ MX6SL_PAD_SD1_DAT0__GPIO5_IO11 0x1b8b1 /* ricoh619 irq */
+ MX6SL_PAD_KEY_COL2__GPIO3_IO28 0x1b8b1 /* ricoh619 bat_low_int */
+ >;
+ };
+
+ pinctrl_uart1: uart1grp {
+ fsl,pins = <
+ MX6SL_PAD_UART1_TXD__UART1_TX_DATA 0x1b0b1
+ MX6SL_PAD_UART1_RXD__UART1_TX_DATA 0x1b0b1
+ >;
+ };
+
+ pinctrl_usbotg1: usbotg1grp {
+ fsl,pins = <
+ MX6SL_PAD_EPDC_PWRCOM__USB_OTG1_ID 0x17059
+ >;
+ };
+
+ pinctrl_usdhc2: usdhc2grp {
+ fsl,pins = <
+ MX6SL_PAD_SD2_CMD__SD2_CMD 0x17059
+ MX6SL_PAD_SD2_CLK__SD2_CLK 0x13059
+ MX6SL_PAD_SD2_DAT0__SD2_DATA0 0x17059
+ MX6SL_PAD_SD2_DAT1__SD2_DATA1 0x17059
+ MX6SL_PAD_SD2_DAT2__SD2_DATA2 0x17059
+ MX6SL_PAD_SD2_DAT3__SD2_DATA3 0x17059
+ >;
+ };
+
+ pinctrl_usdhc2_100mhz: usdhc2grp-100mhz {
+ fsl,pins = <
+ MX6SL_PAD_SD2_CMD__SD2_CMD 0x170b9
+ MX6SL_PAD_SD2_CLK__SD2_CLK 0x130b9
+ MX6SL_PAD_SD2_DAT0__SD2_DATA0 0x170b9
+ MX6SL_PAD_SD2_DAT1__SD2_DATA1 0x170b9
+ MX6SL_PAD_SD2_DAT2__SD2_DATA2 0x170b9
+ MX6SL_PAD_SD2_DAT3__SD2_DATA3 0x170b9
+ >;
+ };
+
+ pinctrl_usdhc2_200mhz: usdhc2grp-200mhz {
+ fsl,pins = <
+ MX6SL_PAD_SD2_CMD__SD2_CMD 0x170f9
+ MX6SL_PAD_SD2_CLK__SD2_CLK 0x130f9
+ MX6SL_PAD_SD2_DAT0__SD2_DATA0 0x170f9
+ MX6SL_PAD_SD2_DAT1__SD2_DATA1 0x170f9
+ MX6SL_PAD_SD2_DAT2__SD2_DATA2 0x170f9
+ MX6SL_PAD_SD2_DAT3__SD2_DATA3 0x170f9
+ >;
+ };
+
+ pinctrl_usdhc2_sleep: usdhc2grp-sleep {
+ fsl,pins = <
+ MX6SL_PAD_SD2_CMD__GPIO5_IO04 0x100f9
+ MX6SL_PAD_SD2_CLK__GPIO5_IO05 0x100f9
+ MX6SL_PAD_SD2_DAT0__GPIO5_IO01 0x100f9
+ MX6SL_PAD_SD2_DAT1__GPIO4_IO30 0x100f9
+ MX6SL_PAD_SD2_DAT2__GPIO5_IO03 0x100f9
+ MX6SL_PAD_SD2_DAT3__GPIO4_IO28 0x100f9
+ >;
+ };
+
+ pinctrl_usdhc3: usdhc3grp {
+ fsl,pins = <
+ MX6SL_PAD_SD3_CMD__SD3_CMD 0x11059
+ MX6SL_PAD_SD3_CLK__SD3_CLK 0x11059
+ MX6SL_PAD_SD3_DAT0__SD3_DATA0 0x11059
+ MX6SL_PAD_SD3_DAT1__SD3_DATA1 0x11059
+ MX6SL_PAD_SD3_DAT2__SD3_DATA2 0x11059
+ MX6SL_PAD_SD3_DAT3__SD3_DATA3 0x11059
+ >;
+ };
+
+ pinctrl_usdhc3_100mhz: usdhc3grp-100mhz {
+ fsl,pins = <
+ MX6SL_PAD_SD3_CMD__SD3_CMD 0x170b9
+ MX6SL_PAD_SD3_CLK__SD3_CLK 0x170b9
+ MX6SL_PAD_SD3_DAT0__SD3_DATA0 0x170b9
+ MX6SL_PAD_SD3_DAT1__SD3_DATA1 0x170b9
+ MX6SL_PAD_SD3_DAT2__SD3_DATA2 0x170b9
+ MX6SL_PAD_SD3_DAT3__SD3_DATA3 0x170b9
+ >;
+ };
+
+ pinctrl_usdhc3_200mhz: usdhc3grp-200mhz {
+ fsl,pins = <
+ MX6SL_PAD_SD3_CMD__SD3_CMD 0x170f9
+ MX6SL_PAD_SD3_CLK__SD3_CLK 0x170f9
+ MX6SL_PAD_SD3_DAT0__SD3_DATA0 0x170f9
+ MX6SL_PAD_SD3_DAT1__SD3_DATA1 0x170f9
+ MX6SL_PAD_SD3_DAT2__SD3_DATA2 0x170f9
+ MX6SL_PAD_SD3_DAT3__SD3_DATA3 0x170f9
+ >;
+ };
+
+ pinctrl_usdhc3_sleep: usdhc3grp-sleep {
+ fsl,pins = <
+ MX6SL_PAD_SD3_CMD__GPIO5_IO21 0x100c1
+ MX6SL_PAD_SD3_CLK__GPIO5_IO18 0x100c1
+ MX6SL_PAD_SD3_DAT0__GPIO5_IO19 0x100c1
+ MX6SL_PAD_SD3_DAT1__GPIO5_IO20 0x100c1
+ MX6SL_PAD_SD3_DAT2__GPIO5_IO16 0x100c1
+ MX6SL_PAD_SD3_DAT3__GPIO5_IO17 0x100c1
+ >;
+ };
+
+ pinctrl_wifi_power: wifi-powergrp {
+ fsl,pins = <
+ MX6SL_PAD_SD2_DAT6__GPIO4_IO29 0x10059 /* WIFI_3V3_ON */
+ >;
+ };
+
+ pinctrl_wifi_reset: wifi-resetgrp {
+ fsl,pins = <
+ MX6SL_PAD_SD2_DAT7__GPIO5_IO00 0x10059 /* WIFI_RST */
+ >;
+ };
+
+ pinctrl_zforce: zforcegrp {
+ fsl,pins = <
+ MX6SL_PAD_SD1_DAT3__GPIO5_IO06 0x17059 /* TP_INT */
+ MX6SL_PAD_SD1_DAT5__GPIO5_IO09 0x10059 /* TP_RST */
+ >;
+ };
+};
+
+®_vdd1p1 {
+ vin-supply = <&dcdc2_reg>;
+};
+
+®_vdd2p5 {
+ vin-supply = <&dcdc2_reg>;
+};
+
+®_arm {
+ vin-supply = <&dcdc3_reg>;
+};
+
+®_soc {
+ vin-supply = <&dcdc1_reg>;
+};
+
+®_pu {
+ vin-supply = <&dcdc1_reg>;
+};
+
+&snvs_rtc {
+ /*
+ * We are using the RTC in the PMIC, but this one is not disabled
+ * in imx6sl.dtsi.
+ */
+ status = "disabled";
+};
+
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1>;
+ status = "okay";
+};
+
+&usdhc2 {
+ pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep";
+ pinctrl-0 = <&pinctrl_usdhc2>;
+ pinctrl-1 = <&pinctrl_usdhc2_100mhz>;
+ pinctrl-2 = <&pinctrl_usdhc2_200mhz>;
+ pinctrl-3 = <&pinctrl_usdhc2_sleep>;
+ non-removable;
+ status = "okay";
+
+ /* internal uSD card */
+};
+
+&usdhc3 {
+ pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep";
+ pinctrl-0 = <&pinctrl_usdhc3>;
+ pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+ pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+ pinctrl-3 = <&pinctrl_usdhc3_sleep>;
+ vmmc-supply = <®_wifi>;
+ mmc-pwrseq = <&wifi_pwrseq>;
+ cap-power-off-card;
+ non-removable;
+ status = "okay";
+
+ /*
+ * 37NB-E60QF0+4A2: CyberTan WC121 (BCM43362) SDIO WiFi
+ * 37NB-E60QF0+4A3: RTL8189F SDIO WiFi
+ */
+};
+
+&usbotg1 {
+ pinctrl-names = "default";
+ disable-over-current;
+ srp-disable;
+ hnp-disable;
+ adp-disable;
+ status = "okay";
+};
--
2.20.1
Powered by blists - more mailing lists