| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <b88538f92386f41b938c502ae2daec5800a85dcf.camel@perches.com>
Date: Wed, 26 Aug 2020 07:51:46 -0700
From: Joe Perches <joe@...ches.com>
To: John Paul Adrian Glaubitz <glaubitz@...sik.fu-berlin.de>
Cc: Christoph Hellwig <hch@....de>, Jens Axboe <axboe@...nel.dk>,
Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
"Rafael J. Wysocki" <rafael@...nel.org>,
Denis Efremov <efremov@...ux.com>,
"David S. Miller" <davem@...emloft.net>,
Song Liu <song@...nel.org>, Al Viro <viro@...iv.linux.org.uk>,
linux-block@...r.kernel.org, linux-kernel@...r.kernel.org,
linux-ide@...r.kernel.org, linux-raid@...r.kernel.org,
linux-scsi@...r.kernel.org, linux-m68k@...ts.linux-m68k.org
Subject: Re: [PATCH 17/19] z2ram: reindent
On Wed, 2020-08-26 at 11:49 +0200, John Paul Adrian Glaubitz wrote:
> > On Aug 26, 2020, at 11:21 AM, Joe Perches <joe@...ches.com> wrote:
> >
> > On Wed, 2020-08-26 at 08:24 +0200, Christoph Hellwig wrote:
> > > reindent the driver using Lident as the code style was far away from
> > > normal Linux code.
> >
> > Why? Does anyone use this anymore?
>
> Yes, the Amiga and Linux/m68k is very well and alive.
That's fine. My question was why ancient code should be modified
if it's not in use.
> There is new hardware being developed and new drivers being developed and so on.
OK, fine.
btw:
If style only changes are to be done on this code then
I believe these changes on top should also be made done
for style:
---
>From 0eb1b25575abe52415ecb0139e14ae57ba4f57cb Mon Sep 17 00:00:00 2001
Message-Id: <0eb1b25575abe52415ecb0139e14ae57ba4f57cb.1598453361.git.joe@...ches.com>
From: Joe Perches <joe@...ches.com>
Date: Wed, 26 Aug 2020 02:20:14 -0700
Subject: [PATCH] z2ram: Use more current coding style
Use pr_fmt and pr_<level>, continue, and remove tests against NULL.
Use more typical brace styles, add and remove them as appropriate.
Simplify logic in z2_open, rename err_out label to out, unindent a
large block by reversing the test and using goto.
Signed-off-by: Joe Perches <joe@...ches.com>
---
drivers/block/z2ram.c | 261 +++++++++++++++++++-----------------------
1 file changed, 118 insertions(+), 143 deletions(-)
diff --git a/drivers/block/z2ram.c b/drivers/block/z2ram.c
index 566c653399d8..ea490fe4417e 100644
--- a/drivers/block/z2ram.c
+++ b/drivers/block/z2ram.c
@@ -1,7 +1,7 @@
/*
** z2ram - Amiga pseudo-driver to access 16bit-RAM in ZorroII space
** as a block device, to be used as a RAM disk or swap space
-**
+**
** Copyright (C) 1994 by Ingo Wilken (Ingo.Wilken@...ormatik.uni-oldenburg.de)
**
** ++Geert: support for zorro_unused_z2ram, better range checking
@@ -25,6 +25,8 @@
** implied warranty.
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#define DEVICE_NAME "Z2RAM"
#include <linux/major.h>
@@ -75,7 +77,7 @@ static blk_status_t z2_queue_rq(struct blk_mq_hw_ctx *hctx,
blk_mq_start_request(req);
if (start + len > z2ram_size) {
- pr_err(DEVICE_NAME ": bad access: block=%llu, count=%u\n",
+ pr_err("bad access: block=%llu, count=%u\n",
(unsigned long long)blk_rq_pos(req),
blk_rq_cur_sectors(req));
return BLK_STS_IOERR;
@@ -109,34 +111,28 @@ static void get_z2ram(void)
int i;
for (i = 0; i < Z2RAM_SIZE / Z2RAM_CHUNKSIZE; i++) {
- if (test_bit(i, zorro_unused_z2ram)) {
- z2_count++;
- z2ram_map[z2ram_size++] =
- (unsigned long)ZTWO_VADDR(Z2RAM_START) +
- (i << Z2RAM_CHUNKSHIFT);
- clear_bit(i, zorro_unused_z2ram);
- }
+ if (!test_bit(i, zorro_unused_z2ram))
+ continue;
+ z2_count++;
+ z2ram_map[z2ram_size++] =
+ (unsigned long)ZTWO_VADDR(Z2RAM_START) +
+ (i << Z2RAM_CHUNKSHIFT);
+ clear_bit(i, zorro_unused_z2ram);
}
-
- return;
}
static void get_chipram(void)
{
-
while (amiga_chip_avail() > (Z2RAM_CHUNKSIZE * 4)) {
chip_count++;
z2ram_map[z2ram_size] =
(u_long) amiga_chip_alloc(Z2RAM_CHUNKSIZE, "z2ram");
- if (z2ram_map[z2ram_size] == 0) {
+ if (z2ram_map[z2ram_size] == 0)
break;
- }
z2ram_size++;
}
-
- return;
}
static int z2_open(struct block_device *bdev, fmode_t mode)
@@ -152,144 +148,127 @@ static int z2_open(struct block_device *bdev, fmode_t mode)
mutex_lock(&z2ram_mutex);
if (current_device != -1 && current_device != device) {
rc = -EBUSY;
- goto err_out;
+ goto out;
}
- if (current_device == -1) {
- z2_count = 0;
- chip_count = 0;
- list_count = 0;
- z2ram_size = 0;
-
- /* Use a specific list entry. */
- if (device >= Z2MINOR_MEMLIST1 && device <= Z2MINOR_MEMLIST4) {
- int index = device - Z2MINOR_MEMLIST1 + 1;
- unsigned long size, paddr, vaddr;
-
- if (index >= m68k_realnum_memory) {
- printk(KERN_ERR DEVICE_NAME
- ": no such entry in z2ram_map\n");
- goto err_out;
- }
+ if (current_device != -1) {
+ rc = 0;
+ goto out;
+ }
- paddr = m68k_memory[index].addr;
- size = m68k_memory[index].size & ~(Z2RAM_CHUNKSIZE - 1);
+ z2_count = 0;
+ chip_count = 0;
+ list_count = 0;
+ z2ram_size = 0;
-#ifdef __powerpc__
- /*
- * FIXME: ioremap doesn't build correct memory tables.
- */
- vfree(vmalloc(size));
- vaddr = (unsigned long)ioremap_wt(paddr, size);
+ /* Use a specific list entry. */
+ if (device >= Z2MINOR_MEMLIST1 && device <= Z2MINOR_MEMLIST4) {
+ int index = device - Z2MINOR_MEMLIST1 + 1;
+ unsigned long size, paddr, vaddr;
+
+ if (index >= m68k_realnum_memory) {
+ pr_err("no such entry in z2ram_map\n");
+ goto out;
+ }
+ paddr = m68k_memory[index].addr;
+ size = m68k_memory[index].size & ~(Z2RAM_CHUNKSIZE - 1);
+
+#ifdef __powerpc__
+ /*
+ * FIXME: ioremap doesn't build correct memory tables.
+ */
+ vfree(vmalloc(size));
+ vaddr = (unsigned long)ioremap_wt(paddr, size);
#else
- vaddr =
- (unsigned long)z_remap_nocache_nonser(paddr, size);
+ vaddr = (unsigned long)z_remap_nocache_nonser(paddr, size);
#endif
- z2ram_map =
- kmalloc_array(size / Z2RAM_CHUNKSIZE,
+ z2ram_map = kmalloc_array(size / Z2RAM_CHUNKSIZE,
sizeof(z2ram_map[0]), GFP_KERNEL);
- if (z2ram_map == NULL) {
- printk(KERN_ERR DEVICE_NAME
- ": cannot get mem for z2ram_map\n");
- goto err_out;
+ if (!z2ram_map) {
+ pr_err("cannot get mem for z2ram_map\n");
+ goto out;
+ }
+
+ while (size) {
+ z2ram_map[z2ram_size++] = vaddr;
+ size -= Z2RAM_CHUNKSIZE;
+ vaddr += Z2RAM_CHUNKSIZE;
+ list_count++;
+ }
+
+ if (z2ram_size != 0)
+ pr_info("using %iK List Entry %d Memory\n",
+ list_count * Z2RAM_CHUNK1024, index);
+ } else {
+ switch (device) {
+ case Z2MINOR_COMBINED:
+ z2ram_map = kmalloc(max_z2_map + max_chip_map,
+ GFP_KERNEL);
+ if (!z2ram_map) {
+ pr_err("cannot get mem for z2ram_map\n");
+ goto out;
}
- while (size) {
- z2ram_map[z2ram_size++] = vaddr;
- size -= Z2RAM_CHUNKSIZE;
- vaddr += Z2RAM_CHUNKSIZE;
- list_count++;
+ get_z2ram();
+ get_chipram();
+
+ if (z2ram_size != 0)
+ pr_info("using %iK Zorro II RAM and %iK Chip RAM (Total %dK)\n",
+ z2_count * Z2RAM_CHUNK1024,
+ chip_count * Z2RAM_CHUNK1024,
+ (z2_count + chip_count) * Z2RAM_CHUNK1024);
+
+ break;
+
+ case Z2MINOR_Z2ONLY:
+ z2ram_map = kmalloc(max_z2_map, GFP_KERNEL);
+ if (!z2ram_map) {
+ pr_err("cannot get mem for z2ram_map\n");
+ goto out;
}
+ get_z2ram();
+
if (z2ram_size != 0)
- printk(KERN_INFO DEVICE_NAME
- ": using %iK List Entry %d Memory\n",
- list_count * Z2RAM_CHUNK1024, index);
- } else
- switch (device) {
- case Z2MINOR_COMBINED:
-
- z2ram_map =
- kmalloc(max_z2_map + max_chip_map,
- GFP_KERNEL);
- if (z2ram_map == NULL) {
- printk(KERN_ERR DEVICE_NAME
- ": cannot get mem for z2ram_map\n");
- goto err_out;
- }
-
- get_z2ram();
- get_chipram();
-
- if (z2ram_size != 0)
- printk(KERN_INFO DEVICE_NAME
- ": using %iK Zorro II RAM and %iK Chip RAM (Total %dK)\n",
- z2_count * Z2RAM_CHUNK1024,
- chip_count * Z2RAM_CHUNK1024,
- (z2_count +
- chip_count) * Z2RAM_CHUNK1024);
-
- break;
-
- case Z2MINOR_Z2ONLY:
- z2ram_map = kmalloc(max_z2_map, GFP_KERNEL);
- if (z2ram_map == NULL) {
- printk(KERN_ERR DEVICE_NAME
- ": cannot get mem for z2ram_map\n");
- goto err_out;
- }
-
- get_z2ram();
-
- if (z2ram_size != 0)
- printk(KERN_INFO DEVICE_NAME
- ": using %iK of Zorro II RAM\n",
- z2_count * Z2RAM_CHUNK1024);
-
- break;
-
- case Z2MINOR_CHIPONLY:
- z2ram_map = kmalloc(max_chip_map, GFP_KERNEL);
- if (z2ram_map == NULL) {
- printk(KERN_ERR DEVICE_NAME
- ": cannot get mem for z2ram_map\n");
- goto err_out;
- }
-
- get_chipram();
-
- if (z2ram_size != 0)
- printk(KERN_INFO DEVICE_NAME
- ": using %iK Chip RAM\n",
- chip_count * Z2RAM_CHUNK1024);
-
- break;
-
- default:
- rc = -ENODEV;
- goto err_out;
-
- break;
+ pr_info("using %iK of Zorro II RAM\n",
+ z2_count * Z2RAM_CHUNK1024);
+
+ break;
+
+ case Z2MINOR_CHIPONLY:
+ z2ram_map = kmalloc(max_chip_map, GFP_KERNEL);
+ if (!z2ram_map) {
+ pr_err("cannot get mem for z2ram_map\n");
+ goto out;
}
- if (z2ram_size == 0) {
- printk(KERN_NOTICE DEVICE_NAME
- ": no unused ZII/Chip RAM found\n");
- goto err_out_kfree;
+ get_chipram();
+
+ if (z2ram_size != 0)
+ pr_info("using %iK Chip RAM\n",
+ chip_count * Z2RAM_CHUNK1024);
+
+ break;
+
+ default:
+ rc = -ENODEV;
+ goto out;
}
+ }
- current_device = device;
- z2ram_size <<= Z2RAM_CHUNKSHIFT;
- set_capacity(z2ram_gendisk, z2ram_size >> 9);
+ if (z2ram_size == 0) {
+ pr_notice("no unused ZII/Chip RAM found\n");
+ kfree(z2ram_map);
+ goto out;
}
- mutex_unlock(&z2ram_mutex);
- return 0;
+ current_device = device;
+ z2ram_size <<= Z2RAM_CHUNKSHIFT;
+ set_capacity(z2ram_gendisk, z2ram_size >> 9);
+ rc = 0;
-err_out_kfree:
- kfree(z2ram_map);
-err_out:
+out:
mutex_unlock(&z2ram_mutex);
return rc;
}
@@ -372,7 +351,6 @@ static int __init z2_init(void)
static void __exit z2_exit(void)
{
- int i, j;
blk_unregister_region(MKDEV(Z2RAM_MAJOR, 0), Z2MINOR_COUNT);
unregister_blkdev(Z2RAM_MAJOR, DEVICE_NAME);
del_gendisk(z2ram_gendisk);
@@ -381,24 +359,21 @@ static void __exit z2_exit(void)
blk_mq_free_tag_set(&tag_set);
if (current_device != -1) {
+ int i, j;
+
i = 0;
- for (j = 0; j < z2_count; j++) {
+ for (j = 0; j < z2_count; j++)
set_bit(i++, zorro_unused_z2ram);
- }
for (j = 0; j < chip_count; j++) {
- if (z2ram_map[i]) {
+ if (z2ram_map[i])
amiga_chip_free((void *)z2ram_map[i++]);
- }
}
- if (z2ram_map != NULL) {
+ if (z2ram_map)
kfree(z2ram_map);
- }
}
-
- return;
}
module_init(z2_init);
--
2.26.0
Powered by blists - more mailing lists