lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20200827143249.10973-2-luca@lucaceresoli.net>
Date:   Thu, 27 Aug 2020 16:32:46 +0200
From:   Luca Ceresoli <luca@...aceresoli.net>
To:     linux-fpga@...r.kernel.org
Cc:     Luca Ceresoli <luca@...aceresoli.net>,
        Moritz Fischer <mdf@...nel.org>, Tom Rix <trix@...hat.com>,
        Michal Simek <michal.simek@...inx.com>,
        linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
        Anatolij Gustschin <agust@...x.de>
Subject: [PATCH v2 2/5] fpga manager: xilinx-spi: remove final dot from dev_err() strings

Most dev_err messages in this file have no final dot. Remove the only two
exceptions to make them consistent.

Signed-off-by: Luca Ceresoli <luca@...aceresoli.net>

---

Changes in v2:
 - move before the "provide better diagnostics on programming failure"
   patch for clarity
---
 drivers/fpga/xilinx-spi.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/fpga/xilinx-spi.c b/drivers/fpga/xilinx-spi.c
index 502fae0d1d85..01f494172379 100644
--- a/drivers/fpga/xilinx-spi.c
+++ b/drivers/fpga/xilinx-spi.c
@@ -77,7 +77,7 @@ static int xilinx_spi_write_init(struct fpga_manager *mgr,
 	int err;
 
 	if (info->flags & FPGA_MGR_PARTIAL_RECONFIG) {
-		dev_err(&mgr->dev, "Partial reconfiguration not supported.\n");
+		dev_err(&mgr->dev, "Partial reconfiguration not supported\n");
 		return -EINVAL;
 	}
 
@@ -169,7 +169,7 @@ static int xilinx_spi_write_complete(struct fpga_manager *mgr,
 			return xilinx_spi_apply_cclk_cycles(conf);
 	}
 
-	dev_err(&mgr->dev, "Timeout after config data transfer.\n");
+	dev_err(&mgr->dev, "Timeout after config data transfer\n");
 	return -ETIMEDOUT;
 }
 
-- 
2.28.0

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ