lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20200828100022.1099682-5-npiggin@gmail.com>
Date:   Fri, 28 Aug 2020 20:00:22 +1000
From:   Nicholas Piggin <npiggin@...il.com>
To:     linux-mm@...ck.org
Cc:     Nicholas Piggin <npiggin@...il.com>, linux-arch@...r.kernel.org,
        linux-kernel@...r.kernel.org, linuxppc-dev@...ts.ozlabs.org,
        "Aneesh Kumar K.V" <aneesh.kumar@...ux.ibm.com>,
        Andrew Morton <akpm@...ux-foundation.org>,
        Jens Axboe <axboe@...nel.dk>,
        Peter Zijlstra <peterz@...radead.org>,
        "David S. Miller" <davem@...emloft.net>
Subject: [PATCH 4/4] powerpc/64s/radix: Fix mm_cpumask trimming race vs kthread_use_mm

Commit 0cef77c7798a7 ("powerpc/64s/radix: flush remote CPUs out of
single-threaded mm_cpumask") added a mechanism to trim the mm_cpumask of
a process under certain conditions. One of the assumptions is that
mm_users would not be incremented via a reference outside the process
context with mmget_not_zero() then go on to kthread_use_mm() via that
reference.

That invariant was broken by io_uring code (see previous sparc64 fix),
but I'll point Fixes: to the original powerpc commit because we are
changing that assumption going forward, so this will make backports
match up.

Fix this by no longer relying on that assumption, but by having each CPU
check the mm is not being used, and clearing their own bit from the mask
if it's okay. This fix relies on commit 38cf307c1f20 ("mm: fix
kthread_use_mm() vs TLB invalidate") to disable irqs over the mm switch,
and ARCH_WANT_IRQS_OFF_ACTIVATE_MM to be enabled.

Fixes: 0cef77c7798a7 ("powerpc/64s/radix: flush remote CPUs out of single-threaded mm_cpumask")
Signed-off-by: Nicholas Piggin <npiggin@...il.com>
---
 arch/powerpc/include/asm/tlb.h       | 13 -------------
 arch/powerpc/mm/book3s64/radix_tlb.c | 23 ++++++++++++++++-------
 2 files changed, 16 insertions(+), 20 deletions(-)

diff --git a/arch/powerpc/include/asm/tlb.h b/arch/powerpc/include/asm/tlb.h
index fbc6f3002f23..d97f061fecac 100644
--- a/arch/powerpc/include/asm/tlb.h
+++ b/arch/powerpc/include/asm/tlb.h
@@ -66,19 +66,6 @@ static inline int mm_is_thread_local(struct mm_struct *mm)
 		return false;
 	return cpumask_test_cpu(smp_processor_id(), mm_cpumask(mm));
 }
-static inline void mm_reset_thread_local(struct mm_struct *mm)
-{
-	WARN_ON(atomic_read(&mm->context.copros) > 0);
-	/*
-	 * It's possible for mm_access to take a reference on mm_users to
-	 * access the remote mm from another thread, but it's not allowed
-	 * to set mm_cpumask, so mm_users may be > 1 here.
-	 */
-	WARN_ON(current->mm != mm);
-	atomic_set(&mm->context.active_cpus, 1);
-	cpumask_clear(mm_cpumask(mm));
-	cpumask_set_cpu(smp_processor_id(), mm_cpumask(mm));
-}
 #else /* CONFIG_PPC_BOOK3S_64 */
 static inline int mm_is_thread_local(struct mm_struct *mm)
 {
diff --git a/arch/powerpc/mm/book3s64/radix_tlb.c b/arch/powerpc/mm/book3s64/radix_tlb.c
index 0d233763441f..a421a0e3f930 100644
--- a/arch/powerpc/mm/book3s64/radix_tlb.c
+++ b/arch/powerpc/mm/book3s64/radix_tlb.c
@@ -645,19 +645,29 @@ static void do_exit_flush_lazy_tlb(void *arg)
 	struct mm_struct *mm = arg;
 	unsigned long pid = mm->context.id;
 
+	/*
+	 * A kthread could have done a mmget_not_zero() after the flushing CPU
+	 * checked mm_users == 1, and be in the process of kthread_use_mm when
+	 * interrupted here. In that case, current->mm will be set to mm,
+	 * because kthread_use_mm() setting ->mm and switching to the mm is
+	 * done with interrupts off.
+	 */
 	if (current->mm == mm)
-		return; /* Local CPU */
+		goto out_flush;
 
 	if (current->active_mm == mm) {
-		/*
-		 * Must be a kernel thread because sender is single-threaded.
-		 */
-		BUG_ON(current->mm);
+		WARN_ON_ONCE(current->mm != NULL);
+		/* Is a kernel thread and is using mm as the lazy tlb */
 		mmgrab(&init_mm);
-		switch_mm(mm, &init_mm, current);
 		current->active_mm = &init_mm;
+		switch_mm_irqs_off(mm, &init_mm, current);
 		mmdrop(mm);
 	}
+
+	atomic_dec(&mm->context.active_cpus);
+	cpumask_clear_cpu(smp_processor_id(), mm_cpumask(mm));
+
+out_flush:
 	_tlbiel_pid(pid, RIC_FLUSH_ALL);
 }
 
@@ -672,7 +682,6 @@ static void exit_flush_lazy_tlbs(struct mm_struct *mm)
 	 */
 	smp_call_function_many(mm_cpumask(mm), do_exit_flush_lazy_tlb,
 				(void *)mm, 1);
-	mm_reset_thread_local(mm);
 }
 
 void radix__flush_tlb_mm(struct mm_struct *mm)
-- 
2.23.0

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ