lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite for Android: free password hash cracker in your pocket
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <MWHPR11MB1645978AC5FCA5954174C8E48C520@MWHPR11MB1645.namprd11.prod.outlook.com>
Date:   Fri, 28 Aug 2020 01:32:32 +0000
From:   "Tian, Kevin" <kevin.tian@...el.com>
To:     Lu Baolu <baolu.lu@...ux.intel.com>, Joerg Roedel <joro@...tes.org>
CC:     "iommu@...ts.linux-foundation.org" <iommu@...ts.linux-foundation.org>,
        "linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
        "Andy Lutomirski" <luto@...capital.net>,
        Jacob Pan <jacob.jun.pan@...ux.intel.com>,
        "Raj, Ashok" <ashok.raj@...el.com>
Subject: RE: [PATCH v3 1/1] iommu/vt-d: Serialize IOMMU GCMD register
 modifications

> From: Lu Baolu <baolu.lu@...ux.intel.com>
> Sent: Friday, August 28, 2020 8:06 AM
> 
> The VT-d spec requires (10.4.4 Global Command Register, GCMD_REG
> General
> Description) that:
> 
> If multiple control fields in this register need to be modified, software
> must serialize the modifications through multiple writes to this register.
> 
> However, in irq_remapping.c, modifications of IRE and CFI are done in one
> write. We need to do two separate writes with STS checking after each. It
> also checks the status register before writing command register to avoid
> unnecessary register write.
> 
> Fixes: af8d102f999a4 ("x86/intel/irq_remapping: Clean up x2apic opt-out
> security warning mess")
> Cc: Andy Lutomirski <luto@...capital.net>
> Cc: Jacob Pan <jacob.jun.pan@...ux.intel.com>
> Cc: Kevin Tian <kevin.tian@...el.com>
> Cc: Ashok Raj <ashok.raj@...el.com>
> Signed-off-by: Lu Baolu <baolu.lu@...ux.intel.com>
> ---
>  drivers/iommu/intel/irq_remapping.c | 10 ++++++++--
>  1 file changed, 8 insertions(+), 2 deletions(-)
> 
> Change log:
> v1->v2:
>   - v1 posted here
>     https://lore.kernel.org/linux-iommu/20200826025825.2322-1-
> baolu.lu@...ux.intel.com/
>   - Add status check before disabling CFI (Kevin)
> v2->v3:
>   - v2 posted here
>     https://lore.kernel.org/linux-iommu/20200827042513.30292-1-
> baolu.lu@...ux.intel.com/
>   - Remove unnecessary register read (Kevin)
> 
> diff --git a/drivers/iommu/intel/irq_remapping.c
> b/drivers/iommu/intel/irq_remapping.c
> index 9564d23d094f..a91dd997d268 100644
> --- a/drivers/iommu/intel/irq_remapping.c
> +++ b/drivers/iommu/intel/irq_remapping.c
> @@ -507,12 +507,18 @@ static void iommu_enable_irq_remapping(struct
> intel_iommu *iommu)
> 
>  	/* Enable interrupt-remapping */
>  	iommu->gcmd |= DMA_GCMD_IRE;
> -	iommu->gcmd &= ~DMA_GCMD_CFI;  /* Block compatibility-format
> MSIs */
>  	writel(iommu->gcmd, iommu->reg + DMAR_GCMD_REG);
> -
>  	IOMMU_WAIT_OP(iommu, DMAR_GSTS_REG,
>  		      readl, (sts & DMA_GSTS_IRES), sts);
> 
> +	/* Block compatibility-format MSIs */
> +	if (sts & DMA_GSTS_CFIS) {
> +		iommu->gcmd &= ~DMA_GCMD_CFI;
> +		writel(iommu->gcmd, iommu->reg + DMAR_GCMD_REG);
> +		IOMMU_WAIT_OP(iommu, DMAR_GSTS_REG,
> +			      readl, !(sts & DMA_GSTS_CFIS), sts);
> +	}
> +
>  	/*
>  	 * With CFI clear in the Global Command register, we should be
>  	 * protected from dangerous (i.e. compatibility) interrupts
> --
> 2.17.1

Reviewed-by: Kevin Tian <kevin.tian@...el.com>

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ